Equivalent & Substitute Parts for UPS2F010MPD1TD

Part Overview

The UPS2F010MPD1TD is a 1 µF, 315 V aluminum electrolytic capacitor in radial configuration manufactured by Nichicon. This component is classified as Not For New Designs, indicating it has been superseded in the manufacturer's product line. For applications currently using this part, identifying compatible substitutes ensures design continuity and supply chain flexibility while maintaining electrical and mechanical compatibility.

Substiute Parts

UPS2F010MPD1TD

NichiconIn Stock: 3229UPS2F010MPD1TD Datasheet

Current PartRFQ

UPJ2F010MPD1TD

NichiconIn Stock: 989UPJ2F010MPD1TD Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the UPS2F010MPD1TD is determined by the following critical parameters:

• Electrical Specifications: Capacitance (1 µF), voltage rating (315 V), and tolerance (±20%) must match exactly
• Mechanical Compatibility: Lead spacing (4.60 mm), case diameter (8.00 mm), and through-hole mounting configuration must be identical to ensure PCB footprint compatibility
• Environmental Compliance: RoHS3 compliance and REACH unaffected status must be maintained
• Polarization: Polar configuration is required for this application category

The UPJ2F010MPD1TD meets all substitution criteria. Both parts share identical electrical ratings, mechanical dimensions, lead spacing, and compliance certifications. The primary difference lies in the series designation and operational lifetime specification, which does not affect functional interchangeability in the specified application.

Parameter Comparison

Engineering Selection Recommendations

Both the UPS2F010MPD1TD and UPJ2F010MPD1TD are classified as Not For New Designs by Nichicon, indicating both have been superseded. Selection between these parts should be based on supply availability and inventory status rather than performance differentiation.

The UPJ2F010MPD1TD offers extended operational lifetime (3000 Hrs @ 105°C versus 2000 Hrs) and higher ripple current ratings, which may provide operational margin in applications with sustained thermal or electrical stress. However, the UPS2F010MPD1TD remains functionally equivalent for applications within its specified ratings.

Both parts maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory compatibility. The mechanical dimensions are compatible with existing PCB layouts, with the UPJ2F010MPD1TD featuring a slightly reduced seated height (12.50 mm versus 13.00 mm), which does not affect mounting compatibility.

Frequently Asked Questions (FAQ)

Q: Can the UPJ2F010MPD1TD be used as a direct replacement for the UPS2F010MPD1TD?

A: Yes. Both parts share identical capacitance (1 µF), voltage rating (315 V), tolerance (±20%), lead spacing (4.60 mm), case diameter (8.00 mm), and through-hole mounting configuration. PCB footprints are compatible without modification.

Q: What is the difference in height between these two parts?

A: The UPS2F010MPD1TD has a maximum seated height of 13.00 mm, while the UPJ2F010MPD1TD measures 12.50 mm. This 0.50 mm difference does not affect mounting compatibility on standard PCB layouts.

Q: Are both parts RoHS compliant?

A: Yes. Both the UPS2F010MPD1TD and UPJ2F010MPD1TD are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic components.

Q: Why does the UPJ2F010MPD1TD have higher ripple current ratings?

A: The UPJ2F010MPD1TD is specified with higher ripple current capacity (19 mA @ 120 Hz and 30.4 mA @ 10 kHz compared to 16 mA and 25.6 mA respectively) and extended lifetime (3000 Hrs versus 2000 Hrs @ 105°C). These are inherent characteristics of the UPJ series design.

Q: Can these parts be used interchangeably in high-temperature applications?

A: Both parts operate across the same temperature range (-40°C to 105°C). The UPJ2F010MPD1TD provides extended operational lifetime at 105°C, which may be advantageous in sustained high-temperature environments.

Q: What packaging format is used for these parts?

A: Both parts are supplied in Cut Tape (CT) packaging and feature radial, can-style through-hole configuration suitable for conventional PCB assembly processes.