UPM2F2R2MPD1TD Equivalent & Substitute Parts

Part Overview

The UPM2F2R2MPD1TD is a 2.2 µF, 315 V aluminum electrolytic capacitor in radial configuration manufactured by Nichicon. This component is rated for automotive applications with AEC-Q200 compliance and features a 5000-hour lifetime at 105°C operating temperature. The part carries a "Not For New Designs" status, making identification of suitable alternatives essential for ongoing production and design updates.

Substiute Parts

UPM2F2R2MPD1TD

NichiconIn Stock: 787UPM2F2R2MPD1TD Datasheet

Current PartRFQ

UPW2F2R2MPD1TD

NichiconIn Stock: 1203UPW2F2R2MPD1TD Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the UPM2F2R2MPD1TD is determined by strict equivalence across the following critical parameters:

• Capacitance Value: 2.2 µF (exact match required)
• Voltage Rating: 315 V (exact match required)
• Tolerance: ±20% (exact match required)
• Polarization: Polar (exact match required)
• Lead Spacing: 0.197" (5.00mm) (exact match required)
• Physical Dimensions: 0.394" Dia (10.00mm) (exact match required)
• Mounting Type: Through Hole, Radial configuration (exact match required)
• Package / Case: Radial, Can (exact match required)
• RoHS Compliance: ROHS3 Compliant (exact match required)

The UPW2F2R2MPD1TD meets all substitution criteria and is classified as a direct equivalent part.

Parameter Comparison

Engineering Selection Recommendations

The UPW2F2R2MPD1TD is a direct equivalent substitute for the UPM2F2R2MPD1TD. Both parts are manufactured by Nichicon, share identical electrical specifications (2.2 µF, 315 V, ±20% tolerance), and maintain equivalent thermal performance (5000 Hrs @ 105°C). Both components are ROHS3 compliant and feature identical lead spacing and physical dimensions suitable for through-hole mounting in radial configuration.

The UPW2F2R2MPD1TD exhibits a marginal height difference of 0.020" (0.50mm) lower than the main part, which does not affect PCB layout compatibility. The ripple current specification at 120 Hz is slightly lower (28 mA versus 32 mA), remaining within acceptable operational parameters for equivalent circuit applications.

Both parts carry "Not For New Designs" status, indicating they are legacy components. Selection between these equivalents should be based on inventory availability and lead time requirements.

Frequently Asked Questions (FAQ)

Q: Can the UPW2F2R2MPD1TD replace the UPM2F2R2MPD1TD in existing designs?

A: Yes. The UPW2F2R2MPD1TD is a direct electrical and mechanical equivalent. All critical parameters—capacitance, voltage rating, tolerance, operating temperature range, and physical dimensions—are identical. The parts are interchangeable for through-hole PCB applications.

Q: What is the significance of the height difference between these parts?

A: The UPW2F2R2MPD1TD is 0.020" (0.50mm) shorter than the UPM2F2R2MPD1TD. This difference does not affect PCB layout compatibility or mounting clearance for standard through-hole applications.

Q: Are there differences in ripple current ratings?

A: The UPW2F2R2MPD1TD has a ripple current rating of 28 mA @ 120 Hz, compared to 32 mA @ 120 Hz for the UPM2F2R2MPD1TD. Both ratings are suitable for equivalent circuit applications. The UPW2F2R2MPD1TD also provides a ripple current specification at high frequency (44.8 mA @ 10 kHz), which is not specified for the main part.

Q: What compliance certifications apply to both parts?

A: Both the UPM2F2R2MPD1TD and UPW2F2R2MPD1TD are ROHS3 compliant. The main part carries AEC-Q200 automotive rating; the substitute part is designated for general purpose applications.

Q: Why do both parts have "Not For New Designs" status?

A: This status indicates both components are legacy products. For new design initiatives, consultation with the manufacturer regarding current-generation alternatives is recommended.