UPM2E2R2MPD Equivalent & Substitute Parts

Part Overview

The UPM2E2R2MPD is a 2.2 µF, 250 V aluminum electrolytic capacitor in radial, can package manufactured by Nichicon. This component is rated for 5000 hours at 105°C with AEC-Q200 automotive qualification. The part is classified as obsolete, necessitating identification of equivalent and substitute components for ongoing design support and procurement continuity.

Key Parameters

Parameter	Value
Capacitance	2.2 µF
Voltage Rating	250 V
Tolerance	±20%
Lifetime @ 105°C	5000 Hrs
Operating Temperature Range	-40°C to 105°C
Lead Spacing	5.00 mm
Package Diameter	10.00 mm
Package Height	14.50 mm
Mounting Type	Through Hole
Ripple Current @ 120 Hz	32 mA
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution of the UPM2E2R2MPD is determined by the following critical parameters: capacitance value (2.2 µF), voltage rating (minimum 250 V), tolerance (±20%), operating temperature range (-40°C to 105°C), lead spacing (5.00 mm), package diameter (10.00 mm), and through-hole mounting configuration. Parts are grouped into three categories based on substitution relationship and electrical characteristics:

Direct Substitutes maintain identical electrical specifications and packaging dimensions, differing only in packaging format (tape vs. bulk).

Manufacturer-Recommended Substitutes provide higher voltage ratings or alternative thermal performance characteristics while maintaining core electrical compatibility.

Upgrade Substitutes offer enhanced voltage ratings or thermal performance within the same manufacturer series.

Similar Alternatives from different manufacturers meet the core electrical specifications but may differ in lead spacing, package dimensions, or thermal ratings.

Parameter Comparison

Part Number	Manufacturer	Capacitance	Voltage	Tolerance	Lifetime @ 105°C	Lead Spacing	Package Dia	Package Height	Product Status	Packaging
UPM2E2R2MPD	Nichicon	2.2 µF	250 V	±20%	5000 Hrs	5.00 mm	10.00 mm	14.50 mm	Obsolete	Bulk
UPM2E2R2MPD1TD	Nichicon	2.2 µF	250 V	±20%	5000 Hrs	5.00 mm	10.00 mm	14.50 mm	Obsolete	Cut Tape
UPM2F2R2MPD1TD	Nichicon	2.2 µF	315 V	±20%	5000 Hrs	5.00 mm	10.00 mm	14.50 mm	Not For New Designs	Cut Tape
UVZ2G2R2MPD	Nichicon	2.2 µF	400 V	±20%	2000 Hrs	5.00 mm	10.00 mm	12.50 mm	Not For New Designs	Bulk
EKMG251ELL2R2MF11D	Chemi-Con	2.2 µF	250 V	±20%	1000 Hrs	2.50 mm	6.30 mm	12.50 mm	Active	Bulk
MAL214232283E3	Vishay Beyschlag/Draloric/BC Components	2.2 µF	250 V	±20%	2500 Hrs	5.00 mm	6.30 mm	12.50 mm	Active	Tape & Box
MAL214252283E3	Vishay Beyschlag/Draloric/BC Components	2.2 µF	250 V	±20%	2500 Hrs	2.50 mm	6.30 mm	12.50 mm	Active	Bulk
MAL214272283E3	Vishay Beyschlag/Draloric/BC Components	2.2 µF	250 V	±20%	2500 Hrs	2.50 mm	6.30 mm	12.50 mm	Active	Tape & Box
SEK2R2M250ST	Cornell Dubilier Electronics (CDE)	2.2 µF	250 V	±20%	2000 Hrs	2.50 mm	6.30 mm	11.50 mm	Active	Bulk

Engineering Selection Recommendations

Direct Substitution (Preferred for Existing Designs): UPM2E2R2MPD1TD is the direct equivalent, differing only in packaging format (cut tape vs. bulk). Both parts maintain identical electrical specifications, thermal ratings, and AEC-Q200 automotive qualification. This substitution requires no circuit redesign.

Voltage-Upgraded Substitution: UPM2F2R2MPD1TD provides 315 V rating while maintaining 5000-hour lifetime at 105°C and identical physical dimensions. This part is suitable for applications where higher voltage margin is acceptable. UVZ2G2R2MPD offers 400 V rating but with reduced lifetime (2000 hours) and slightly reduced package height (12.50 mm vs. 14.50 mm).

Alternative Manufacturer Options: EKMG251ELL2R2MF11D (Chemi-Con), MAL214232283E3, MAL214252283E3, MAL214272283E3 (Vishay), and SEK2R2M250ST (Cornell Dubilier) are active products meeting the 2.2 µF, 250 V, ±20% specification. These alternatives feature reduced lead spacing (2.50 mm) and smaller package diameters (6.30 mm), requiring PCB layout verification before implementation. Thermal ratings vary from 1000 to 2500 hours at 105°C, below the original 5000-hour specification.

Compliance Considerations: All listed substitutes maintain ROHS3 compliance. The original UPM2E2R2MPD carries AEC-Q200 automotive qualification; alternative manufacturers' parts lack this certification and are designated for general-purpose applications.

Frequently Asked Questions (FAQ)

Q: Can UPM2E2R2MPD1TD be used as a direct replacement? A: Yes. UPM2E2R2MPD1TD is electrically and mechanically identical to UPM2E2R2MPD, with the only difference being packaging format (cut tape vs. bulk). No circuit modifications are required.

Q: What is the difference between the Nichicon UPM and UVZ series substitutes? A: UPM2F2R2MPD1TD maintains the same 5000-hour thermal rating at 105°C with upgraded 315 V rating. UVZ2G2R2MPD provides 400 V rating but with reduced thermal performance (2000 hours at 105°C) and slightly shorter package height (12.50 mm vs. 14.50 mm). Selection depends on voltage margin requirements and thermal cycling expectations.

Q: Are the Vishay MAL214 series parts compatible with the original footprint? A: The Vishay MAL214 series parts have identical lead spacing (5.00 mm for MAL214232283E3) or reduced lead spacing (2.50 mm for MAL214252283E3 and MAL214272283E3). Package diameter is reduced to 6.30 mm compared to the original 10.00 mm. PCB layout verification is required before substitution.

Q: Why do alternative manufacturer parts have lower thermal ratings? A: The original UPM2E2R2MPD is rated for 5000 hours at 105°C. Alternative manufacturers' parts (Chemi-Con, Vishay, Cornell Dubilier) in this category are rated for 1000 to 2500 hours at 105°C. Application thermal cycling requirements must be evaluated to determine acceptability.

Q: Is AEC-Q200 certification required for my application? A: AEC-Q200 automotive qualification is present only on Nichicon UPM series parts (UPM2E2R2MPD and UPM2E2R2MPD1TD). Alternative manufacturers' parts are designated for general-purpose applications. Automotive or mission-critical applications should maintain AEC-Q200 qualified components.

Q: Can I use a higher voltage-rated part as a substitute? A: Yes. Higher voltage ratings provide additional safety margin. UPM2F2R2MPD1TD (315 V) and UVZ2G2R2MPD (400 V) are electrically compatible with circuits designed for 250 V operation. Physical dimensions must be verified for PCB fit.

Q: What packaging options are available? A: The original UPM2E2R2MPD is supplied in bulk packaging. UPM2E2R2MPD1TD is available in cut tape format. Vishay MAL214 series parts are available in tape & box or bulk formats. Cornell Dubilier SEK2R2M250ST is supplied in bulk. Packaging selection depends on assembly process requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message