Equivalent & Substitute Parts for UPM2D220MHD1TO

Part Overview

The UPM2D220MHD1TO is a 22 µF, 200 V aluminum electrolytic capacitor in radial configuration manufactured by Nichicon. This component is rated for automotive applications with AEC-Q200 certification and offers a 5000-hour lifetime at 105°C operating temperature. The part is designated as "Not For New Designs," making identification of equivalent and substitute parts essential for ongoing maintenance, repair, and legacy system support.

Key Parameters

Parameter	Value
Capacitance	22 µF
Voltage Rating	200 V
Tolerance	±20%
Polarization	Polar
Package Type	Radial, Can
Mounting Type	Through Hole
Lead Spacing	0.197" (5.00 mm)
Case Diameter	0.492" (12.50 mm)
Operating Temperature Range	-40°C ~ 105°C
Lifetime @ Temperature	5000 Hrs @ 105°C

Substitute Part Grouping Explanation

Substitution eligibility for the UPM2D220MHD1TO is determined by the following critical parameters:

Capacitance value: 22 µF (exact match required)
Voltage rating: 200 V minimum (equal or higher acceptable)
Tolerance: ±20% (matching specification)
Polarization: Polar (required for polarity-sensitive circuits)
Package configuration: Radial, Can with Through Hole mounting
Lead spacing: 0.197" (5.00 mm) (mechanical compatibility)
Case diameter: 0.492" (12.50 mm) (PCB footprint compatibility)
Operating temperature range: -40°C ~ 105°C minimum (functional compatibility)

Two substitute parts meet these criteria:

UPJ2D220MHD1TO — Direct equivalent with identical electrical specifications and mechanical dimensions. Differs in application classification (General Purpose vs. Automotive) and REACH status.
UPW2E220MHD1TO — Upgrade substitute with higher voltage rating (250 V) and extended lifetime (7000 Hrs @ 105°C). Maintains all mechanical compatibility parameters and exceeds electrical performance requirements.

Parameter Comparison

Parameter	UPM2D220MHD1TO (Main)	UPJ2D220MHD1TO (Direct)	UPW2E220MHD1TO (Upgrade)
Manufacturer	Nichicon	Nichicon	Nichicon
Series	UPM	UPJ	UPW
Capacitance	22 µF	22 µF	22 µF
Tolerance	±20%	±20%	±20%
Voltage Rating	200 V	200 V	250 V
Lifetime @ 105°C	5000 Hrs	5000 Hrs	7000 Hrs
Operating Temperature	-40°C ~ 105°C	-40°C ~ 105°C	-40°C ~ 105°C
Ripple Current @ 120 Hz	145 mA	145 mA	155 mA
Ripple Current @ 10 kHz	232 mA	232 mA	248 mA
Lead Spacing	0.197" (5.00 mm)	0.197" (5.00 mm)	0.197" (5.00 mm)
Case Diameter	0.492" (12.50 mm)	0.492" (12.50 mm)	0.492" (12.50 mm)
Height (Seated Max)	1.063" (27.00 mm)	1.043" (26.50 mm)	1.063" (27.00 mm)
Package Type	Radial, Can	Radial, Can	Radial, Can
Mounting Type	Through Hole	Through Hole	Through Hole
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Not For New Designs	Not For New Designs	Not For New Designs

Engineering Selection Recommendations

UPJ2D220MHD1TO is the direct functional equivalent for applications requiring exact specification matching. This part maintains identical electrical performance and mechanical compatibility. Selection of this substitute is appropriate for direct replacement in existing designs where the original UPM2D220MHD1TO is unavailable. Both parts carry "Not For New Designs" status and ROHS3 compliance.

UPW2E220MHD1TO serves as an upgrade substitute where enhanced reliability is beneficial. The 250 V voltage rating provides additional safety margin in circuits designed for 200 V operation. The extended 7000-hour lifetime at 105°C improves long-term reliability compared to the 5000-hour specification of the original part. Mechanical compatibility is maintained with identical lead spacing and case diameter. This upgrade is suitable for applications where circuit voltage stress analysis confirms compatibility with the higher-rated component.

Both substitute parts are manufactured by Nichicon and maintain Through Hole radial configuration with identical lead spacing (5.00 mm) and case diameter (12.50 mm), ensuring direct PCB footprint compatibility without layout modifications.

Frequently Asked Questions (FAQ)

Q: Can UPJ2D220MHD1TO replace UPM2D220MHD1TO in automotive applications?

A: UPJ2D220MHD1TO is electrically and mechanically equivalent to UPM2D220MHD1TO. The primary difference is application classification: UPM is rated for automotive use with AEC-Q200 certification, while UPJ is classified for general purpose applications. Direct substitution is mechanically and electrically feasible; however, compliance with automotive qualification requirements must be evaluated based on specific system requirements.

Q: What is the advantage of using UPW2E220MHD1TO over the original part?

A: UPW2E220MHD1TO provides two performance enhancements: higher voltage rating (250 V vs. 200 V) and extended lifetime (7000 Hrs vs. 5000 Hrs at 105°C). These improvements increase design margin and component reliability. Mechanical compatibility remains identical, requiring no PCB modifications.

Q: Are all three parts mechanically interchangeable?

A: Yes. All three parts share identical lead spacing (5.00 mm) and case diameter (12.50 mm). Height variation between UPJ2D220MHD1TO (26.50 mm max) and the other two parts (27.00 mm max) is within typical PCB clearance tolerances and does not prevent interchangeability.

Q: Do all substitute parts meet RoHS and REACH compliance requirements?

A: All three parts are ROHS3 compliant. UPM2D220MHD1TO is REACH Affected; UPJ2D220MHD1TO is REACH Unaffected; UPW2E220MHD1TO is REACH Unaffected. Compliance verification should be performed based on specific regulatory requirements for the end application.

Q: Can these parts be used in circuits rated for 200 V if I select the 250 V UPW2E220MHD1TO?

A: Yes. The UPW2E220MHD1TO 250 V rating exceeds the 200 V circuit requirement, providing additional voltage margin. This configuration is electrically valid and does not create compatibility issues.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message