UPM2C010MPD Equivalent & Substitute Parts

Part Overview

The UPM2C010MPD is a 1 µF, 160 V aluminum electrolytic capacitor in radial, can package manufactured by Nichicon. This component is classified as Obsolete, making equivalent and substitute parts necessary for ongoing production and maintenance applications. The UPM series is rated for automotive applications with AEC-Q200 compliance and offers a 3000-hour lifetime at 105°C operating temperature.

Key Parameters

Parameter	Value
Capacitance	1 µF
Voltage Rating	160 V
Tolerance	±20%
Lifetime @ 105°C	3000 Hrs
Operating Temperature Range	-40°C ~ 105°C
Polarization	Polar
Package Type	Radial, Can
Mounting Type	Through Hole
Lead Spacing	0.138" (4.60mm)
Case Diameter	0.315" (8.00mm)
Height (Seated Max)	0.512" (13.00mm)
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution for the UPM2C010MPD is determined by the following critical parameters: capacitance value (1 µF), tolerance (±20%), polarization (polar), package type (radial can), mounting type (through hole), and lead spacing (4.60mm). Voltage rating, lifetime, and series designation establish substitution categories.

Substitute parts are grouped into three categories:

Direct Substitutes (Same Voltage Rating - 160V): Parts maintaining identical electrical specifications and physical dimensions. UPJ2C010MPD1TD qualifies as a direct substitute with matching capacitance, voltage, tolerance, and lead spacing, though with slightly reduced height (0.492" vs 0.512").

Upgrade Substitutes (Higher Voltage Rating): Parts with elevated voltage ratings (200V, 250V, 315V) that maintain identical capacitance, tolerance, and physical lead spacing. These include UPJ2D010MPD1TD (200V), UPJ2E010MPD1TD (250V), UPJ2F010MPD1TD (315V), and UPM2D010MPD1TD (200V). Higher voltage ratings provide design margin in applications where voltage stress may vary.

Similar Substitutes (Different Physical Dimensions): Parts with matching electrical specifications but different case sizes and lead spacing. UPW2C010MED, UVZ2C010MED, and SEK010M160ST feature reduced case diameter (0.248" vs 0.315") and lead spacing (0.098" vs 0.138"), requiring PCB layout modification.

Parameter Comparison

Part Number	Manufacturer	Series	Capacitance	Voltage	Tolerance	Lifetime @ 105°C	Lead Spacing	Case Diameter	Height (Max)	Product Status	Applications
UPM2C010MPD	Nichicon	UPM	1 µF	160 V	±20%	3000 Hrs	0.138" (4.60mm)	0.315" (8.00mm)	0.512" (13.00mm)	Obsolete	Automotive
UPJ2C010MPD1TD	Nichicon	UPJ	1 µF	160 V	±20%	3000 Hrs	0.138" (4.60mm)	0.315" (8.00mm)	0.492" (12.50mm)	Not For New Designs	General Purpose
UPJ2D010MPD1TD	Nichicon	UPJ	1 µF	200 V	±20%	3000 Hrs	0.138" (4.60mm)	0.315" (8.00mm)	0.492" (12.50mm)	Not For New Designs	General Purpose
UPJ2E010MPD1TD	Nichicon	UPJ	1 µF	250 V	±20%	3000 Hrs	0.138" (4.60mm)	0.315" (8.00mm)	0.492" (12.50mm)	Not For New Designs	General Purpose
UPJ2F010MPD1TD	Nichicon	UPJ	1 µF	315 V	±20%	3000 Hrs	0.138" (4.60mm)	0.315" (8.00mm)	0.492" (12.50mm)	Not For New Designs	General Purpose
UPM2D010MPD1TD	Nichicon	UPM	1 µF	200 V	±20%	3000 Hrs	0.138" (4.60mm)	0.315" (8.00mm)	0.512" (13.00mm)	Not For New Designs	Automotive
UPW2C010MED	Nichicon	UPW	1 µF	160 V	±20%	2000 Hrs	0.098" (2.50mm)	0.248" (6.30mm)	0.433" (11.00mm)	Obsolete	General Purpose
UVZ2C010MED	Nichicon	UVZ	1 µF	160 V	±20%	1000 Hrs	0.098" (2.50mm)	0.248" (6.30mm)	0.492" (12.50mm)	Obsolete	General Purpose
SEK010M160ST	Cornell Dubilier Electronics (CDE)	SEK	1 µF	160 V	±20%	2000 Hrs	0.098" (2.50mm)	0.248" (6.30mm)	0.433" (11.00mm)	Active	General Purpose

Engineering Selection Recommendations

For Automotive Applications with AEC-Q200 Requirement: UPM2D010MPD1TD is the preferred substitute. It maintains the UPM series designation, AEC-Q200 automotive rating, identical physical dimensions (0.512" height, 4.60mm lead spacing), and provides upgraded 200V voltage rating while preserving 3000-hour lifetime at 105°C.

For General Purpose Applications without Automotive Certification: UPJ2C010MPD1TD serves as a direct electrical equivalent with matching 160V rating and 3000-hour lifetime. Physical dimensions are compatible with minor height reduction (0.492" vs 0.512"). This part is suitable for non-automotive circuits where AEC-Q200 compliance is not required.

For Voltage Margin Enhancement: UPJ2D010MPD1TD, UPJ2E010MPD1TD, or UPJ2F010MPD1TD provide higher voltage ratings (200V, 250V, 315V respectively) while maintaining identical lead spacing and case diameter. These upgrades are applicable when circuit voltage stress analysis indicates benefit from increased voltage headroom.

For Space-Constrained Designs: UPW2C010MED or SEK010M160ST offer reduced physical footprint (0.248" diameter, 2.50mm lead spacing) with matching electrical specifications. PCB layout modification is required due to different lead spacing and case size. SEK010M160ST is currently active in production, whereas UPW2C010MED is obsolete.

Avoid: UVZ2C010MED due to significantly reduced lifetime (1000 Hrs @ 105°C vs 3000 Hrs), which does not meet the original part's reliability specification.

Frequently Asked Questions (FAQ)

Q: Can UPJ2C010MPD1TD directly replace UPM2C010MPD in automotive applications?

A: UPJ2C010MPD1TD is electrically equivalent but lacks AEC-Q200 automotive certification. It is suitable only for general purpose applications. For automotive use, specify UPM2D010MPD1TD to maintain AEC-Q200 compliance.

Q: What is the difference between direct substitutes and upgrade substitutes?

A: Direct substitutes maintain identical voltage ratings (160V). Upgrade substitutes feature higher voltage ratings (200V, 250V, 315V) while preserving capacitance, tolerance, and lead spacing. Upgrades provide additional voltage margin but do not change electrical performance at the original 160V operating point.

Q: Can I use SEK010M160ST as a drop-in replacement?

A: SEK010M160ST is electrically equivalent but has different physical dimensions: 0.248" diameter and 2.50mm lead spacing versus 0.315" diameter and 4.60mm lead spacing on the UPM2C010MPD. PCB layout modification is required. Additionally, SEK010M160ST is manufactured by Cornell Dubilier Electronics, not Nichicon.

Q: Why is UVZ2C010MED not recommended?

A: UVZ2C010MED has a lifetime rating of only 1000 hours at 105°C, compared to 3000 hours for the UPM2C010MPD. This reduced reliability does not meet the original specification and is unsuitable for applications requiring the full 3000-hour lifetime.

Q: What is the impact of the 0.020" height difference between UPM2C010MPD and UPJ2C010MPD1TD?

A: The height difference (0.512" vs 0.492") is within typical PCB clearance tolerances for through-hole components. Verify clearance in your specific application, particularly if components are mounted on both sides of the board or if height-constrained enclosures are used.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts carry ROHS3 compliance status, matching the original UPM2C010MPD specification.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message