UPM1V331MHD6AA Equivalent & Substitute Parts

Part Overview

The UPM1V331MHD6AA is a 330 µF, 35 V aluminum electrolytic capacitor in radial, can package manufactured by Nichicon. This component is rated for automotive applications with AEC-Q200 compliance and designed for 5000 hours of operation at 105°C. The part is currently in active production status.

Substitute parts become necessary when the primary part experiences supply constraints, extended lead times, or when design revisions require components with updated product status or enhanced compliance certifications.

Substiute Parts

UPM1V331MHD6AA

NichiconIn Stock: 1201UPM1V331MHD6AA Datasheet

Current PartRFQ

UPM1V331MHD6

NichiconIn Stock: 2465UPM1V331MHD6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the UPM1V331MHD6AA is determined by strict equivalence across the following critical parameters:

• Capacitance: 330 µF (exact match required)
• Voltage Rating: 35 V (exact match required)
• Tolerance: ±20% (exact match required)
• Lifetime @ Temperature: 5000 Hrs @ 105°C (exact match required)
• Operating Temperature Range: -55°C ~ 105°C (exact match required)
• Polarization: Polar (exact match required)
• Mounting Type: Through Hole (exact match required)
• Package / Case: Radial, Can (exact match required)
• Lead Spacing: 0.197" (5.00 mm) (exact match required)
• Physical Dimensions: 0.492" Dia (12.50 mm), Height 0.669" (17.00 mm) (exact match required)
• Impedance: 65 mOhms (exact match required)
• Ripple Current Ratings: 780 mA @ 120 Hz, 1.02 A @ 10 kHz (exact match required)
• AEC-Q200 Compliance: Required for automotive applications

The substitute part UPM1V331MHD6 meets all electrical and mechanical parameters specified above.

Parameter Comparison

Engineering Selection Recommendations

The UPM1V331MHD6AA is the recommended choice for new automotive designs. This part carries Active product status, ensuring continued manufacturer support and long-term availability.

The UPM1V331MHD6 substitute is electrically and mechanically equivalent but carries Not For New Designs status. This part is suitable for legacy system maintenance, field replacements, or applications where existing inventory must be utilized. Both parts maintain full AEC-Q200 automotive compliance and identical electrical performance characteristics.

Frequently Asked Questions (FAQ)

Q: Can UPM1V331MHD6 be used as a direct replacement for UPM1V331MHD6AA?

A: Yes. Both parts are parametrically equivalent across all electrical and mechanical specifications, including capacitance, voltage rating, tolerance, temperature ratings, impedance, ripple current, and physical dimensions. Both maintain AEC-Q200 compliance for automotive applications.

Q: What is the difference between these two parts?

A: The primary difference is product status. UPM1V331MHD6AA is Active, while UPM1V331MHD6 is Not For New Designs. Electrically and mechanically, the parts are identical.

Q: Are the physical dimensions identical?

A: Yes. Both parts share identical lead spacing (0.197" / 5.00 mm), diameter (0.492" / 12.50 mm), and maximum seated height (0.669" / 17.00 mm). They are fully interchangeable in through-hole PCB layouts.

Q: Do both parts meet automotive standards?

A: Yes. Both UPM1V331MHD6AA and UPM1V331MHD6 carry AEC-Q200 ratings and are qualified for automotive applications.

Q: What is the operating temperature range?

A: Both parts operate across -55°C to 105°C with a rated lifetime of 5000 hours at 105°C.