UPM1J820MPD Equivalent & Substitute Parts

Part Overview

The UPM1J820MPD is an 82 µF, 63 V aluminum electrolytic capacitor in radial, can package manufactured by Nichicon. This component is rated for automotive applications with AEC-Q200 compliance and features a 3000-hour lifetime at 105°C operating temperature. The part carries a "Not For New Designs" status, making identification of equivalent and substitute components essential for ongoing production support and design transitions.

Substiute Parts

UPM1J820MPD

NichiconIn Stock: 1065UPM1J820MPD Datasheet

Current PartRFQ

UPJ1J820MPD

NichiconIn Stock: 2750UPJ1J820MPD Datasheet

DirectRFQ

UPM1J820MPD1TD

NichiconIn Stock: 1162UPM1J820MPD1TD Datasheet

DirectRFQ

826KXM063MJU

Cornell Dubilier / Illinois CapacitorIn Stock: 864826KXM063MJU Datasheet

DirectRFQ

EEU-FC1J820

Panasonic Electronic ComponentsIn Stock: 1609EEU-FC1J820 Datasheet

SimilarRFQ

EEU-FC1J820B

Panasonic Electronic ComponentsIn Stock: 2537EEU-FC1J820B Datasheet

SimilarRFQ

ELXV630ELL820MH20D

Chemi-ConIn Stock: 891ELXV630ELL820MH20D Datasheet

Parametric EquivalentRFQ

ELXY630ELL820MH20D

Chemi-ConIn Stock: 944ELXY630ELL820MH20D Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the UPM1J820MPD is determined by strict equivalence across the following critical parameters:

• Electrical Parameters: Capacitance (82 µF), voltage rating (63 V), and tolerance (±20%) must match exactly
• Thermal Performance: Lifetime rating of 3000 hours at 105°C must be maintained
• Physical Compatibility: Lead spacing (4.60mm), case diameter (8.00mm), and height must accommodate PCB layout without modification
• Mounting Configuration: Through-hole radial package type is mandatory for direct substitution
• Environmental Compliance: RoHS3 compliance and operating temperature range (-55°C ~ 105°C) must be preserved

Parts are categorized as Direct Manufacturer Equivalents, Similar Alternatives, or Parametric Equivalents based on how closely they align with these criteria.

Parameter Comparison

Engineering Selection Recommendations

Direct Manufacturer Equivalents (Same Series, Same Packaging)

UPM1J820MPD1TD is the direct equivalent in cut tape packaging. It maintains identical electrical specifications, impedance characteristics, and AEC-Q200 automotive certification. Selection between bulk and cut tape packaging depends on assembly process requirements.

Same Manufacturer, Different Series

UPJ1J820MPD is manufactured by Nichicon but belongs to a different series with higher impedance (220 mOhms vs. 150 mOhms) and lacks AEC-Q200 certification. This part is suitable only when automotive qualification is not required and impedance tolerance is acceptable for the application.

Alternative Manufacturers with Automotive Qualification

ELXV630ELL820MH20D and ELXY630ELL820MH20D (Chemi-Con) maintain identical physical dimensions, lead spacing, and AEC-Q200 compliance. Both are active products with comparable impedance performance (210 mOhms). These represent the most direct functional alternatives for ongoing production.

826KXM063MJU (Cornell Dubilier / Illinois Capacitor) matches physical dimensions but exhibits higher impedance (340 mOhms) and lacks AEC-Q200 certification. This part is suitable for general-purpose applications where automotive qualification is not mandatory.

Active Product Alternatives with Different Physical Dimensions

EEU-FC1J820 and EEU-FC1J820B (Panasonic) are active products with AEC-Q200 certification but feature different physical dimensions (10.00mm diameter, 5.00mm lead spacing). These require PCB layout modification and are suitable only when space constraints permit larger component footprints.

Frequently Asked Questions (FAQ)

Q: Can UPJ1J820MPD be used as a direct replacement for UPM1J820MPD in automotive applications?

A: No. While both parts share identical electrical specifications (82 µF, 63 V, ±20%), UPJ1J820MPD lacks AEC-Q200 automotive certification and exhibits higher impedance (220 mOhms vs. 150 mOhms). Use only in non-automotive applications or where automotive qualification is not required.

Q: What is the difference between UPM1J820MPD and UPM1J820MPD1TD?

A: These parts are electrically and physically identical. The primary difference is packaging: UPM1J820MPD is supplied in bulk, while UPM1J820MPD1TD is supplied in cut tape. Selection depends on assembly process compatibility.

Q: Are Chemi-Con ELXV630ELL820MH20D and ELXY630ELL820MH20D interchangeable?

A: Yes. Both parts are physically and electrically identical with matching lead spacing (4.60mm), case diameter (8.00mm), and height (21.50mm). Both maintain AEC-Q200 certification and 3000-hour lifetime at 105°C. Selection between them depends on availability and supply chain requirements.

Q: Can Panasonic EEU-FC1J820 be used as a substitute without PCB modification?

A: No. The EEU-FC1J820 features different physical dimensions (10.00mm diameter, 5.00mm lead spacing vs. 8.00mm diameter, 4.60mm lead spacing). PCB layout modification is required for installation. This part is suitable only when space constraints permit larger component footprints.

Q: Which substitute parts maintain the same physical footprint as UPM1J820MPD?

A: UPM1J820MPD1TD (Nichicon), ELXV630ELL820MH20D (Chemi-Con), and ELXY630ELL820MH20D (Chemi-Con) maintain identical lead spacing (4.60mm), case diameter (8.00mm), and height (21.50mm). These parts require no PCB layout modification.

Q: Is the UPM1J820MPD still in production?

A: No. The UPM1J820MPD carries "Not For New Designs" status. For new designs, select from active products: ELXV630ELL820MH20D, ELXY630ELL820MH20D, EEU-FC1J820, or EEU-FC1J820B.

Q: What does AEC-Q200 certification mean for capacitor selection?

A: AEC-Q200 is an automotive industry qualification standard. Parts bearing this certification meet stringent reliability and performance requirements for automotive applications. For automotive designs, select only from AEC-Q200 certified alternatives.