Equivalent & Substitute Parts for UPM1E561MPD

Part Overview

The UPM1E561MPD is a 560 µF, 25 V aluminum electrolytic capacitor in radial, can package manufactured by Nichicon. This component is rated for 5000 hours at 105°C and carries AEC-Q200 automotive qualification. The part is designated as "Not For New Designs," indicating it has reached end-of-life status. Identifying equivalent and substitute parts is necessary for ongoing maintenance, repair, and legacy system support where this capacitor remains in active use.

Key Parameters

Parameter	Value
Capacitance	560 µF
Voltage Rating	25 V
Tolerance	±20%
Lifetime @ Temperature	5000 Hrs @ 105°C
Operating Temperature Range	-55°C ~ 105°C
Polarization	Polar
Mounting Type	Through Hole
Package Type	Radial, Can
Lead Spacing	0.197" (5.00 mm)
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria:

Primary Substitution Parameters:

Capacitance: 560 µF (exact match required)
Voltage Rating: 25 V (exact match required)
Tolerance: ±20% (exact match required)
Polarization: Polar (exact match required)
Mounting Type: Through Hole (exact match required)
Package Type: Radial, Can (exact match required)
Lead Spacing: 0.197" (5.00 mm) (exact match required)
Operating Temperature Range: -55°C ~ 105°C (exact match required)

Secondary Considerations:

Lifetime @ 105°C: 5000 hours minimum
RoHS3 Compliance: Required
Physical dimensions must accommodate PCB layout constraints

Parts are grouped into three categories:

Direct Substitutes (Packaging Variant): Same electrical and mechanical specifications, differing only in packaging format (Bulk vs. Cut Tape).
Similar Substitutes (Series Variant): Same electrical specifications and physical footprint, from different Nichicon series or alternative manufacturers, with minor variations in ripple current handling or impedance.
Upgrade Substitutes (Voltage Upgrade): Higher voltage rating (35 V vs. 25 V) providing enhanced voltage margin while maintaining identical capacitance and physical compatibility.

Parameter Comparison

Part Number	Manufacturer	Series	Capacitance	Voltage	Lifetime @ 105°C	Lead Spacing	Size Dia	Height (Max)	Impedance	Product Status	Packaging
UPM1E561MPD	Nichicon	UPM	560 µF	25 V	5000 Hrs	0.197" (5.00 mm)	0.394" (10.00 mm)	1.063" (27.00 mm)	55 mOhms	Not For New Designs	Bulk
UPM1E561MPD1TD	Nichicon	UPM	560 µF	25 V	5000 Hrs	0.197" (5.00 mm)	0.394" (10.00 mm)	1.063" (27.00 mm)	55 mOhms	Not For New Designs	Cut Tape (CT)
UPA1E561MPD	Nichicon	UPA	560 µF	25 V	3000 Hrs	0.138" (4.60 mm)	0.315" (8.00 mm)	0.787" (20.00 mm)	44 mOhms	Active	Bulk
UPJ1E561MHD6	Nichicon	UPJ	560 µF	25 V	5000 Hrs	0.197" (5.00 mm)	0.492" (12.50 mm)	0.650" (16.50 mm)	100 mOhms	Not For New Designs	Bulk
UPJ1E561MPD	Nichicon	UPJ	560 µF	25 V	5000 Hrs	0.197" (5.00 mm)	0.394" (10.00 mm)	1.043" (26.50 mm)	84 mOhms	Not For New Designs	Bulk
UPM1E561MHD6	Nichicon	UPM	560 µF	25 V	5000 Hrs	0.197" (5.00 mm)	0.492" (12.50 mm)	0.669" (17.00 mm)	60 mOhms	Not For New Designs	Bulk
UPW1E561MPD	Nichicon	UPW	560 µF	25 V	5000 Hrs	0.197" (5.00 mm)	0.394" (10.00 mm)	0.787" (20.00 mm)	52 mOhms	Not For New Designs	Bulk
ELXZ350ELL561MJ25S	Chemi-Con	LXZ	560 µF	35 V	5000 Hrs	0.197" (5.00 mm)	0.394" (10.00 mm)	1.043" (26.50 mm)	45 mOhms	Active	Bulk
EEU-FC1E561	Panasonic Electronic Components	FC	560 µF	25 V	3000 Hrs	0.197" (5.00 mm)	0.394" (10.00 mm)	0.787" (20.00 mm)	52 mOhms	Active	Bulk
EEU-FC1E561S	Panasonic Electronic Components	FC	560 µF	25 V	5000 Hrs	0.197" (5.00 mm)	0.492" (12.50 mm)	0.591" (15.00 mm)	65 mOhms	Active	Bulk
EEU-FC1E561SB	Panasonic Electronic Components	FC	560 µF	25 V	5000 Hrs	0.197" (5.00 mm)	0.492" (12.50 mm)	0.630" (16.00 mm)	65 mOhms	Active	Tape & Box (TB)

Engineering Selection Recommendations

For Direct Replacement (Identical Footprint and Performance):

UPM1E561MPD1TD is the direct substitute, differing only in packaging format (Cut Tape vs. Bulk). Both parts maintain identical electrical specifications, physical dimensions, and AEC-Q200 automotive qualification. Selection between these depends on procurement and assembly requirements.

For Active Product Status (Recommended for New Designs and Ongoing Support):

EEU-FC1E561S and EEU-FC1E561SB (Panasonic FC series) are active products with 5000-hour lifetime at 105°C and AEC-Q200 qualification. These parts are electrically equivalent and mechanically compatible, though physical dimensions vary slightly (0.492" diameter vs. 0.394" for the main part). PCB layout verification is required before substitution.

For Voltage Margin Enhancement:

ELXZ350ELL561MJ25S (Chemi-Con LXZ series) provides a 35 V rating while maintaining 560 µF capacitance and identical lead spacing. This part is active and AEC-Q200 qualified, offering improved voltage headroom for applications requiring enhanced reliability margins. Physical dimensions are compatible with the main part.

For Legacy System Support:

UPJ1E561MPD and UPW1E561MPD are functionally equivalent Nichicon alternatives with 5000-hour lifetime ratings. Both maintain the 0.197" lead spacing and are suitable for direct PCB substitution, though dimensional variations exist. These parts are designated "Not For New Designs" but remain available for maintenance applications.

Avoid for New Designs:

UPA1E561MPD has reduced lifetime (3000 hours vs. 5000 hours) and different lead spacing (0.138" vs. 0.197"), making it unsuitable as a direct replacement despite matching electrical specifications.

Frequently Asked Questions (FAQ)

Q: Can UPM1E561MPD be replaced with UPA1E561MPD?

A: No. Although both are 560 µF, 25 V capacitors, UPA1E561MPD has different lead spacing (0.138" vs. 0.197") and reduced lifetime (3000 hours vs. 5000 hours). PCB layout modifications would be required, and the reduced lifetime rating makes it unsuitable for applications requiring 5000-hour performance.

Q: What is the difference between UPM1E561MPD and UPM1E561MPD1TD?

A: These parts are electrically and mechanically identical. The only difference is packaging: UPM1E561MPD is supplied in Bulk format, while UPM1E561MPD1TD is supplied in Cut Tape (CT) format. Selection depends on assembly line requirements and procurement preferences.

Q: Can I use EEU-FC1E561S instead of UPM1E561MPD?

A: Yes, with PCB layout verification. Both parts have identical electrical specifications (560 µF, 25 V, 5000 hours @ 105°C) and lead spacing (0.197"). However, EEU-FC1E561S has a larger diameter (0.492" vs. 0.394") and shorter height (0.591" vs. 1.063"), requiring confirmation that the PCB footprint accommodates these dimensions.

Q: Is ELXZ350ELL561MJ25S a suitable upgrade?

A: Yes. The 35 V rating provides enhanced voltage margin while maintaining 560 µF capacitance, identical lead spacing, and compatible physical dimensions. This part is active and AEC-Q200 qualified, making it suitable for applications where increased voltage headroom is beneficial.

Q: Why is UPM1E561MPD marked "Not For New Designs"?

A: This designation indicates the part has reached end-of-life status and is no longer recommended for new product development. However, it remains available for maintenance and repair of existing systems. For new designs, active alternatives such as EEU-FC1E561S or ELXZ350ELL561MJ25S are recommended.

Q: What does AEC-Q200 qualification mean?

A: AEC-Q200 is an automotive qualification standard for discrete semiconductors and passive components. It certifies that the component meets reliability and performance requirements for automotive applications, including temperature cycling, vibration, and humidity testing.

Q: Can I substitute UPJ1E561MHD6 for UPM1E561MPD?

A: Electrically yes, but with dimensional constraints. Both have 560 µF, 25 V ratings and 5000-hour lifetime. However, UPJ1E561MHD6 has a larger diameter (0.492" vs. 0.394") and shorter height (0.650" vs. 1.063"). PCB layout must be verified to ensure the component fits within available space.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All parts listed in this reference are RoHS3 compliant, meeting environmental and hazardous substance restrictions for electronic components.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message