UPM1C152MHD1TO Equivalent & Substitute Parts

Part Overview

The UPM1C152MHD1TO is a 1500 µF, 16 V aluminum electrolytic capacitor in radial configuration manufactured by Nichicon. This component is rated for 5000 hours at 105°C and is designed for automotive applications with AEC-Q200 compliance. The part carries a "Not For New Designs" status, making identification of equivalent and substitute parts essential for ongoing production support and design updates.

Substiute Parts

UPM1C152MHD1TO

NichiconIn Stock: 1676UPM1C152MHD1TO Datasheet

Current PartRFQ

UPJ1C152MHD1TO

NichiconIn Stock: 1290UPJ1C152MHD1TO Datasheet

DirectRFQ

UPW1E152MHD6TO

NichiconIn Stock: 4694UPW1E152MHD6TO Datasheet

UpgradeRFQ

860080478022

Würth ElektronikIn Stock: 1321860080478022 Datasheet

UpgradeRFQ

B41858C5158M8

EPCOS - TDK ElectronicsIn Stock: 1065B41858C5158M8 Datasheet

UpgradeRFQ

EEU-FC1E152B

Panasonic Electronic ComponentsIn Stock: 2200EEU-FC1E152B Datasheet

UpgradeRFQ

MAL214636152E3

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 1063MAL214636152E3 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the UPM1C152MHD1TO is determined by the following critical parameters:

• Capacitance: 1500 µF (exact match required)
• Voltage Rating: Minimum 16 V (higher ratings acceptable for backward compatibility)
• Tolerance: ±20% (standard tolerance maintained)
• Package Configuration: Radial, Can with 0.197" (5.00mm) lead spacing
• Mounting Type: Through Hole
• Polarization: Polar
• Physical Dimensions: Compatible can diameter and height within PCB layout constraints
• Temperature Range: -55°C ~ 105°C minimum
• RoHS Compliance: ROHS3 Compliant

Substitute parts are categorized into two groups: direct equivalents (same voltage rating) and upgrades (higher voltage rating with improved performance characteristics).

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalent (Same Voltage Rating)

UPJ1C152MHD1TO (Nichicon) serves as a direct equivalent with identical electrical specifications. Both parts share the same 16 V rating, 1500 µF capacitance, and ±20% tolerance. The UPJ series exhibits slightly higher impedance (48 mOhms vs. 36 mOhms) and a marginally reduced height (26.50mm vs. 27.00mm), making it suitable for space-constrained applications. Both parts carry "Not For New Designs" status.

Upgrade Options (Higher Voltage Rating)

Five upgrade alternatives are available with 25 V ratings, providing increased voltage margin and improved performance characteristics:

• UPW1E152MHD6TO (Nichicon): Extended lifetime of 7000 hours at 105°C with reduced impedance (30 mOhms). Maintains identical physical dimensions to the original part.

• 860080478022 (Würth Elektronik): Active product status with lowest impedance (23 mOhms) and highest ripple current capability (2.71 A @ 100 kHz). Can diameter is 0.512" (13.00mm), requiring PCB layout verification.

• B41858C5158M8 (EPCOS - TDK Electronics): Active product with automotive application rating. Specified ESR of 41 mOhm @ 10 kHz. Identical physical dimensions to the original part.

• EEU-FC1E152B (Panasonic Electronic Components): Active product with AEC-Q200 automotive compliance. Impedance of 30 mOhms and identical physical dimensions. Highest inventory availability (2165 pcs).

• MAL214636152E3 (Vishay Beyschlag/Draloric/BC Components): Active product with extended operating temperature range (-55°C ~ 125°C) and AEC-Q200 automotive compliance. Lifetime rated at 5000 hours @ 125°C.

All upgrade options maintain 0.197" (5.00mm) lead spacing, radial can package configuration, and ROHS3 compliance. Selection should prioritize active product status for new designs and consider specific application requirements for voltage margin, thermal performance, and impedance characteristics.

Frequently Asked Questions (FAQ)

Q: Can UPJ1C152MHD1TO replace UPM1C152MHD1TO in existing designs?

A: Yes. Both parts share identical electrical specifications (1500 µF, 16 V, ±20% tolerance, 5000 Hrs @ 105°C). The UPJ variant exhibits marginally higher impedance and reduced height. PCB layout verification is recommended to confirm height compatibility.

Q: What is the primary advantage of upgrading to a 25 V rated substitute?

A: Higher voltage rating provides increased design margin and typically delivers improved electrical performance. The 25 V alternatives offer lower impedance values (23–34 mOhms vs. 36 mOhms) and enhanced ripple current handling, benefiting high-frequency applications.

Q: Is the 860080478022 (Würth Elektronik) physically compatible with the original footprint?

A: The can diameter differs (0.512" vs. 0.492"). PCB layout verification is required to confirm clearance around the component mounting area. Lead spacing remains identical at 0.197" (5.00mm).

Q: Which substitute offers the best thermal performance?

A: MAL214636152E3 (Vishay) provides the highest operating temperature range (-55°C ~ 125°C) and is rated for 5000 hours at 125°C, compared to 105°C for other options. This part is suitable for high-temperature environments.

Q: Are all substitutes automotive-qualified?

A: The original UPM1C152MHD1TO carries AEC-Q200 certification. Among substitutes, EEU-FC1E152B (Panasonic) and MAL214636152E3 (Vishay) explicitly list AEC-Q200 compliance. B41858C5158M8 (EPCOS - TDK) is rated for automotive applications. Verify specific automotive qualification requirements for your application.

Q: What is the inventory status of available substitutes?

A: UPW1E152MHD6TO (Nichicon) has the highest inventory at 4629 pcs. EEU-FC1E152B (Panasonic) has 2165 pcs. Other options range from 1005–1237 pcs. The original UPM1C152MHD1TO has 1598 pcs available.

Q: Can I use a 25 V substitute in a 16 V circuit?

A: Yes. Higher voltage-rated capacitors are backward compatible in lower voltage applications. The 25 V alternatives are suitable for 16 V circuits and provide additional voltage margin for transient protection.