UPLR2000-D7 BNC Connector Plug Equivalent & Substitute Parts

Part Overview

The UPLR2000-D7 is a BNC connector plug manufactured by Cinch Connectivity Solutions Trompeter, designed for 75-ohm coaxial cable applications. This right-angle crimp connector operates at frequencies up to 6 GHz and is rated for 500 mating cycles. The part is currently active in production with 1008 units in stock.

Substitute parts are identified when equivalent electrical and mechanical parameters align with the main part specifications, enabling direct replacement in applications where the connector serves the same functional role in RF signal transmission.

Substiute Parts

UPLR2000-D7

Cinch Connectivity Solutions TrompeterIn Stock: 1054UPLR2000-D7 Datasheet

Current PartRFQ

031-80901

Amphenol RFIn Stock: 1030031-80901 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The substitute part 031-80901 (Amphenol RF) qualifies as an equivalent based on the following matching parameters:

• Connector style: BNC
• Connector type: Plug, Male Pin
• Impedance: 75 Ohms
• Mounting type: Free Hanging (In-Line), Right Angle
• Contact termination: Crimp
• Shield termination: Crimp
• Fastening type: Bayonet Lock
• Voltage rating: 500 V
• Mating cycles: 500
• Operating temperature: -40°C ~ 85°C
• Dielectric material: PTFE
• Center contact plating: Gold
• Insertion loss: 0.2 dB

These parameters define the functional equivalence for RF coaxial connector applications requiring 75-ohm impedance and right-angle crimp termination.

Parameter Comparison

Engineering Selection Recommendations

Both the UPLR2000-D7 and 031-80901 are active production parts with equivalent electrical and mechanical specifications for 75-ohm BNC crimp connector applications. Both parts maintain RoHS compliance and operate within identical voltage, temperature, and mating cycle parameters.

The UPLR2000-D7 supports frequencies up to 6 GHz, while the 031-80901 is rated to 3 GHz. Selection between these parts depends on the maximum frequency requirement of the application. For applications operating at or below 3 GHz, both parts are functionally equivalent. For applications requiring operation above 3 GHz, the UPLR2000-D7 is the appropriate selection.

Both parts are currently in active stock status, ensuring availability for procurement.

Frequently Asked Questions (FAQ)

Q: Can the 031-80901 replace the UPLR2000-D7 in all applications?

A: The 031-80901 is functionally equivalent for applications operating at frequencies up to 3 GHz. Applications requiring operation above 3 GHz must use the UPLR2000-D7, which is rated to 6 GHz.

Q: What cable types are compatible with these connectors?

A: The UPLR2000-D7 is specified for RG-179 and Belden 9221 cables. The 031-80901 supports RG-179, 179A, 179B, 187, 187A, Belden 9221, and M17/94-RG179 cables. Verify cable compatibility with your specific application requirements.

Q: Are there differences in the included components?

A: The UPLR2000-D7 includes 5 pieces (1 connector, 1 bushing, 1 contact, 2 sleeves). The 031-80901 includes 3 pieces (1 connector, 1 contact, 1 ferrule). Confirm that included components meet your assembly requirements.

Q: Do both parts meet current compliance standards?

A: Yes. The UPLR2000-D7 is RoHS Compliant. The 031-80901 is ROHS3 Compliant and REACH Affected. Both parts carry EAR99 ECCN classification and identical HTSUS codes.

Q: What is the difference in body material between these parts?

A: The UPLR2000-D7 uses brass body material with nickel finish. The 031-80901 uses zinc die cast body material with nickel finish. Both materials provide equivalent electrical performance for 75-ohm RF applications.