Equivalent & Substitute Parts for UPJ2D220MHD1TO

Part Overview

The UPJ2D220MHD1TO is a 22 µF, 200 V aluminum electrolytic capacitor in radial configuration manufactured by Nichicon. This component is classified as "Not For New Designs," indicating it has been superseded in the product portfolio. Finding equivalent and substitute parts is necessary to ensure design continuity, maintain inventory flexibility, and support legacy system maintenance where this capacitor is specified.

Key Parameters

Parameter	Value
Capacitance	22 µF
Voltage Rating	200 V
Tolerance	±20%
Lifetime @ Temperature	5000 Hrs @ 105°C
Operating Temperature Range	-40°C ~ 105°C
Lead Spacing	0.197" (5.00 mm)
Case Diameter	0.492" (12.50 mm)
Mounting Type	Through Hole Radial
Ripple Current @ 120 Hz	145 mA
Ripple Current @ 10 kHz	232 mA

Substitute Part Grouping Explanation

Substitution for the UPJ2D220MHD1TO is determined by strict equivalence in the following critical parameters:

Capacitance value: 22 µF (exact match required)
Voltage rating: 200 V minimum (equal or higher acceptable)
Tolerance: ±20% (matching specification)
Polarization: Polar (radial aluminum electrolytic)
Lead spacing: 0.197" (5.00 mm) (mechanical compatibility)
Case diameter: 0.492" (12.50 mm) (PCB footprint compatibility)
Mounting type: Through Hole (assembly process compatibility)

Substitute parts are grouped into two categories:

Direct Equivalent: UPM2D220MHD1TO maintains identical electrical and mechanical specifications with equivalent performance characteristics.

Upgrade Substitutes: UPW2E220MHD1TO provides enhanced voltage rating (250 V) and extended lifetime (7000 Hrs @ 105°C), suitable for applications requiring higher voltage margin or improved reliability.

Parameter Comparison

Parameter	UPJ2D220MHD1TO	UPM2D220MHD1TO	UPW2E220MHD1TO
Manufacturer	Nichicon	Nichicon	Nichicon
Series	UPJ	UPM	UPW
Capacitance	22 µF	22 µF	22 µF
Voltage Rating	200 V	200 V	250 V
Tolerance	±20%	±20%	±20%
Lifetime @ 105°C	5000 Hrs	5000 Hrs	7000 Hrs
Operating Temperature	-40°C ~ 105°C	-40°C ~ 105°C	-40°C ~ 105°C
Lead Spacing	0.197" (5.00 mm)	0.197" (5.00 mm)	0.197" (5.00 mm)
Case Diameter	0.492" (12.50 mm)	0.492" (12.50 mm)	0.492" (12.50 mm)
Height - Seated (Max)	1.043" (26.50 mm)	1.063" (27.00 mm)	1.063" (27.00 mm)
Ripple Current @ 120 Hz	145 mA	145 mA	155 mA
Ripple Current @ 10 kHz	232 mA	232 mA	248 mA
Product Status	Not For New Designs	Not For New Designs	Not For New Designs
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Packaging	Cut Tape (CT)	Cut Tape (CT)	Cut Tape (CT)

Engineering Selection Recommendations

UPM2D220MHD1TO is the direct equivalent substitute for UPJ2D220MHD1TO. Both parts share identical electrical specifications, mechanical dimensions, and thermal characteristics. The UPM series is qualified to AEC-Q200 automotive standards, providing additional reliability assurance for applications requiring automotive-grade components. This part is suitable for direct replacement in existing designs without circuit modification.

UPW2E220MHD1TO is an upgrade substitute offering enhanced performance through increased voltage rating (250 V vs. 200 V) and extended operational lifetime (7000 Hrs vs. 5000 Hrs at 105°C). The UPW series is classified as Obsolete; however, it remains available in inventory. This part is appropriate for applications where higher voltage margin or extended service life is beneficial. The marginal increase in seated height (1.063" vs. 1.043") must be verified for PCB clearance compatibility.

All substitute parts maintain ROHS3 compliance and are suitable for through-hole assembly processes identical to the original specification.

Frequently Asked Questions (FAQ)

Q: Can UPM2D220MHD1TO be used as a direct replacement for UPJ2D220MHD1TO?

A: Yes. Both parts are electrically and mechanically equivalent with identical capacitance (22 µF), voltage rating (200 V), tolerance (±20%), lead spacing (5.00 mm), and case diameter (12.50 mm). No circuit modification is required.

Q: What is the difference between UPJ2D220MHD1TO and UPW2E220MHD1TO?

A: The primary differences are voltage rating (200 V vs. 250 V) and lifetime rating (5000 Hrs vs. 7000 Hrs @ 105°C). The UPW series provides higher voltage margin and extended reliability. Seated height increases from 26.50 mm to 27.00 mm, requiring PCB clearance verification.

Q: Are all substitute parts RoHS compliant?

A: Yes. UPJ2D220MHD1TO, UPM2D220MHD1TO, and UPW2E220MHD1TO are all ROHS3 compliant.

Q: Can the UPW2E220MHD1TO be used in a circuit designed for 200 V operation?

A: Yes. The UPW2E220MHD1TO is rated for 250 V, which exceeds the 200 V requirement. Higher voltage-rated capacitors are suitable for lower voltage applications and provide additional safety margin.

Q: What is the impact of the height difference between substitute parts?

A: UPJ2D220MHD1TO has a maximum seated height of 26.50 mm, while UPM2D220MHD1TO and UPW2E220MHD1TO are 27.00 mm. This 0.50 mm difference must be verified against PCB layout constraints, component clearances, and enclosure dimensions before substitution.

Q: Are these parts suitable for new designs?

A: All three parts carry "Not For New Designs" or "Obsolete" status. These parts are appropriate for legacy system maintenance, repair, and inventory support. For new designs, consult current Nichicon product lines for active alternatives.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message