UPJ2D100MPD Equivalent & Substitute Parts

Part Overview

The UPJ2D100MPD is a 10 µF, 200 V aluminum electrolytic capacitor in radial, can package manufactured by Nichicon. This part operates across a temperature range of -40°C to 105°C with a rated lifetime of 5000 hours at 105°C. The product is classified as obsolete, making equivalent and substitute parts necessary for ongoing design support and procurement.

Key Parameters

Parameter	Value
Capacitance	10 µF
Tolerance	±20%
Voltage - Rated	200 V
Lifetime @ Temperature	5000 Hrs @ 105°C
Operating Temperature Range	-40°C ~ 105°C
Polarization	Polar
Lead Spacing	0.197" (5.00mm)
Size / Dimension	0.394" Dia (10.00mm)
Mounting Type	Through Hole
Package / Case	Radial, Can
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution for the UPJ2D100MPD is determined by strict equivalence across the following critical parameters: capacitance (10 µF), tolerance (±20%), voltage rating (200 V minimum), polarization (polar), lead spacing (5.00mm), case size (10.00mm diameter), and through-hole mounting configuration. Parts are grouped into four categories based on product status and performance characteristics:

Direct Equivalent (Same Series, Different Packaging): UPJ2D100MPD1TD maintains identical electrical specifications and physical dimensions but differs only in packaging format (Cut Tape versus standard radial).

Manufacturer Recommended (Active Status, Enhanced Performance): UCS2D100MPD provides the same 10 µF / 200 V specification with improved lifetime (8000 hours versus 5000 hours) and higher ripple current ratings. This part is active and suitable for new designs.

Voltage Upgrades (Higher Voltage Rating, Same Capacitance): UCS2E100MPD (250 V), UCS2V100MPD (350 V), and UCS2G100MPD (400 V) maintain the 10 µF capacitance and physical dimensions while offering increased voltage margins. These parts are active and provide design flexibility for circuits requiring higher voltage tolerance.

Similar Parts (Obsolete or Lower Performance): UPS2D100MPD, UPW2D100MPD, UPW2E100MPD, UVY2D100MPD, and UVZ2D100MPD share the same capacitance and voltage specifications but differ in lifetime ratings, ripple current capabilities, or physical dimensions. These parts are either obsolete or not recommended for new designs.

Parameter Comparison

Part Number	Manufacturer	Series	Capacitance	Voltage	Lifetime @ 105°C	Lead Spacing	Height (Max)	Product Status	Ripple Current @ 120 Hz	Ripple Current @ 10 kHz / 100 kHz
UPJ2D100MPD	Nichicon	UPJ	10 µF	200 V	5000 Hrs	5.00mm	21.50mm	Obsolete	95 mA	152 mA @ 10 kHz
UPJ2D100MPD1TD	Nichicon	UPJ	10 µF	200 V	5000 Hrs	5.00mm	21.50mm	Not For New Designs	95 mA	152 mA @ 10 kHz
UCS2D100MPD	Nichicon	UCS	10 µF	200 V	8000 Hrs	5.00mm	17.50mm	Active	160 mA	320 mA @ 100 kHz
UCS2E100MPD	Nichicon	UCS	10 µF	250 V	8000 Hrs	5.00mm	21.50mm	Active	175 mA	350 mA @ 100 kHz
UCS2V100MPD	Nichicon	UCS	10 µF	350 V	8000 Hrs	5.00mm	21.50mm	Active	175 mA	350 mA @ 100 kHz
UCS2G100MPD	Nichicon	UCS	10 µF	400 V	8000 Hrs	5.00mm	21.50mm	Active	175 mA	350 mA @ 100 kHz
UPW2D100MPD	Nichicon	UPW	10 µF	200 V	5000 Hrs	5.00mm	16.00mm	Obsolete	80 mA	128 mA @ 10 kHz
UPW2E100MPD	Nichicon	UPW	10 µF	250 V	5000 Hrs	5.00mm	20.00mm	Obsolete	88 mA	140.8 mA @ 10 kHz
UPS2D100MPD	Nichicon	UPS	10 µF	200 V	2000 Hrs	5.00mm	16.00mm	Obsolete	80 mA	128 mA @ 10 kHz
UVY2D100MPD	Nichicon	UVY	10 µF	200 V	1000 Hrs	4.60mm	13.00mm	Not For New Designs	57 mA	65.55 mA @ 10 kHz
UVZ2D100MPD	Nichicon	UVZ	10 µF	200 V	2000 Hrs	5.00mm	12.50mm	Not For New Designs	65 mA	104 mA @ 10 kHz

Engineering Selection Recommendations

For Direct Replacement (Obsolete Design Continuation): UPJ2D100MPD1TD provides identical electrical and mechanical specifications with the same 5000-hour lifetime rating. This part is classified as "Not For New Designs" but remains suitable for legacy system maintenance where exact form-factor compatibility is required.

For New Designs (Recommended Primary Choice): UCS2D100MPD is the preferred substitute. It maintains the 10 µF / 200 V specification with improved reliability (8000-hour lifetime versus 5000 hours), higher ripple current capacity (160 mA @ 120 Hz and 320 mA @ 100 kHz versus 95 mA and 152 mA), and reduced physical height (17.50mm versus 21.50mm). This part is active and ROHS3 compliant.

For Voltage-Margin Applications: When circuit design permits higher voltage ratings, UCS2E100MPD (250 V), UCS2V100MPD (350 V), or UCS2G100MPD (400 V) provide enhanced voltage safety margins while maintaining the same 10 µF capacitance and active product status. All three offer 8000-hour lifetime and superior ripple current performance.

Avoid for New Designs: UPS2D100MPD, UPW2D100MPD, UPW2E100MPD, UVY2D100MPD, and UVZ2D100MPD are either obsolete or not recommended for new designs. These parts exhibit lower lifetime ratings (1000 to 2000 hours) or reduced ripple current capabilities compared to the UCS series alternatives.

All substitute parts listed are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.

Frequently Asked Questions (FAQ)

Q: Can UCS2D100MPD directly replace UPJ2D100MPD in existing designs?

A: Yes. Both parts share identical capacitance (10 µF), voltage rating (200 V), tolerance (±20%), lead spacing (5.00mm), and through-hole radial can package. The primary difference is reduced height (17.50mm versus 21.50mm) and improved lifetime (8000 hours versus 5000 hours). Physical clearance must be verified in the PCB layout.

Q: What is the difference between UCS2D100MPD and UCS2E100MPD?

A: The voltage rating differs: UCS2D100MPD is rated 200 V, while UCS2E100MPD is rated 250 V. Both maintain 10 µF capacitance, ±20% tolerance, and 8000-hour lifetime. UCS2E100MPD is taller (21.50mm versus 17.50mm). Selection depends on circuit voltage requirements and available PCB space.

Q: Why is UPJ2D100MPD classified as obsolete?

A: The UPJ series has been superseded by the UCS series, which offers improved performance characteristics including longer lifetime (8000 hours versus 5000 hours) and higher ripple current ratings. Nichicon recommends the UCS series for all new designs.

Q: Can UVY2D100MPD or UVZ2D100MPD be used as substitutes?

A: These parts are not recommended for new designs. UVY2D100MPD has a different lead spacing (4.60mm versus 5.00mm) and significantly lower ripple current capability (57 mA @ 120 Hz). UVZ2D100MPD has reduced height (12.50mm) and lower ripple current (65 mA @ 120 Hz). Both have shorter lifetimes (1000 to 2000 hours). Use only if exact form-factor constraints require it.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All parts listed in this reference are ROHS3 compliant and REACH unaffected, meeting current environmental regulations for electronic component manufacturing and use.

Q: What packaging options are available?

A: UPJ2D100MPD1TD is supplied in Cut Tape (CT) packaging. UCS2D100MPD, UCS2E100MPD, UCS2V100MPD, UCS2G100MPD, and other UCS/UPW/UPS/UVY/UVZ variants are supplied in Bulk packaging. Packaging selection depends on procurement volume and assembly process requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message