UPJ2C2R2MPD1TD Equivalent & Substitute Parts

Part Overview

The UPJ2C2R2MPD1TD is a 2.2 µF 160 V aluminum electrolytic capacitor in radial configuration manufactured by Nichicon. This component is rated for general purpose applications with a 3000-hour lifetime at 105°C and operates across the temperature range of -40°C to 105°C. The part is marked as "Not For New Designs," indicating its status in the product lifecycle. Due to this designation, identifying equivalent and substitute parts with compatible electrical and mechanical specifications is essential for ongoing maintenance, repair, and legacy system support.

Key Parameters

Parameter	Value
Capacitance	2.2 µF
Tolerance	±20%
Voltage - Rated	160 V
Lifetime @ Temperature	3000 Hrs @ 105°C
Operating Temperature Range	-40°C ~ 105°C
Polarization	Polar
Ripple Current @ 120 Hz	30 mA
Ripple Current @ 10 kHz	48 mA
Lead Spacing	0.138" (4.60 mm)
Size / Dimension	0.315" Dia (8.00 mm)
Height - Seated (Max)	0.512" (13.00 mm)
Mounting Type	Through Hole
Package / Case	Radial, Can
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution of the UPJ2C2R2MPD1TD is determined by strict adherence to the following electrical and mechanical parameters:

Critical Parameters for Substitution:

Capacitance value: 2.2 µF (exact match required)
Tolerance: ±20% (exact match required)
Voltage rating: Equal to or greater than 160 V
Operating temperature range: Must encompass -40°C to 105°C
Polarization: Polar (exact match required)
Lead spacing: 0.138" (4.60 mm) (exact match required)
Package type: Radial, Can (exact match required)
Mounting type: Through Hole (exact match required)

Substitute parts are grouped into two categories:

Upgrade Substitutes: Parts with identical capacitance, tolerance, and mechanical specifications but with equal or higher voltage ratings (200 V or 250 V). These provide enhanced voltage margin while maintaining full backward compatibility.

Parametric Equivalent: Parts with identical electrical and mechanical specifications but different manufacturer series designation or product status. These serve as direct functional replacements.

Parameter Comparison

Parameter	UPJ2C2R2MPD1TD	UPJ2D2R2MPD1TD	UPM2D2R2MPD1TD	UPW2E2R2MPD1TD	UPM2C2R2MPD1TD
Manufacturer	Nichicon	Nichicon	Nichicon	Nichicon	Nichicon
Series	UPJ	UPJ	UPM	UPW	UPM
Capacitance	2.2 µF	2.2 µF	2.2 µF	2.2 µF	2.2 µF
Tolerance	±20%	±20%	±20%	±20%	±20%
Voltage - Rated	160 V	200 V	200 V	250 V	160 V
Lifetime @ Temperature	3000 Hrs @ 105°C	3000 Hrs @ 105°C	3000 Hrs @ 105°C	3000 Hrs @ 105°C	3000 Hrs @ 105°C
Operating Temperature	-40°C ~ 105°C	-40°C ~ 105°C	-40°C ~ 105°C	-40°C ~ 105°C	-40°C ~ 105°C
Polarization	Polar	Polar	Polar	Polar	Polar
Ripple Current @ 120 Hz	30 mA	30 mA	30 mA	29 mA	30 mA
Ripple Current @ 10 kHz	48 mA	48 mA	48 mA	46.4 mA	48 mA
Lead Spacing	0.138" (4.60 mm)	0.138" (4.60 mm)	0.138" (4.60 mm)	0.138" (4.60 mm)	0.138" (4.60 mm)
Size / Dimension	0.315" Dia (8.00 mm)	0.315" Dia (8.00 mm)	0.315" Dia (8.00 mm)	0.315" Dia (8.00 mm)	0.315" Dia (8.00 mm)
Height - Seated (Max)	0.512" (13.00 mm)	0.492" (12.50 mm)	0.512" (13.00 mm)	0.512" (13.00 mm)	0.512" (13.00 mm)
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Package / Case	Radial, Can	Radial, Can	Radial, Can	Radial, Can	Radial, Can
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Not For New Designs	Not For New Designs	Not For New Designs	Not For New Designs	Obsolete
Applications	General Purpose	General Purpose	Automotive	General Purpose	Automotive
Ratings	-	-	AEC-Q200	-	AEC-Q200

Engineering Selection Recommendations

UPJ2D2R2MPD1TD (200 V Upgrade): This part provides a direct upgrade path with increased voltage rating from 160 V to 200 V while maintaining identical capacitance, tolerance, and mechanical form factor. The UPJ series designation and general purpose application classification match the original part. Product status is "Not For New Designs," consistent with the main part. Height is reduced by 0.020" (0.50 mm), which may require PCB layout verification in space-constrained applications.

UPM2D2R2MPD1TD (200 V Automotive-Rated Upgrade): This part offers the same 200 V upgrade with AEC-Q200 automotive qualification. The UPM series is designated for automotive applications, providing enhanced reliability assurance. REACH status is "Affected," which may require compliance verification depending on end-use requirements. Identical mechanical dimensions and electrical specifications ensure direct substitution capability.

UPW2E2R2MPD1TD (250 V Premium Upgrade): This part delivers the highest voltage rating at 250 V, offering maximum voltage margin. The UPW series maintains general purpose application classification. Ripple current specifications are slightly reduced (29 mA @ 120 Hz and 46.4 mA @ 10 kHz compared to 30 mA and 48 mA respectively), which is acceptable for most applications. Identical mechanical dimensions ensure PCB compatibility.

UPM2C2R2MPD1TD (Parametric Equivalent): This part matches the original UPJ2C2R2MPD1TD exactly in electrical and mechanical specifications but carries "Obsolete" product status and AEC-Q200 automotive qualification. Use only when upgrade voltage ratings are not required and automotive-grade reliability is acceptable. REACH status is "Affected."

Frequently Asked Questions (FAQ)

Q: Can I use a higher voltage-rated substitute in place of the UPJ2C2R2MPD1TD?

A: Yes. The UPJ2D2R2MPD1TD (200 V), UPM2D2R2MPD1TD (200 V), and UPW2E2R2MPD1TD (250 V) are all valid substitutes. Higher voltage ratings provide additional safety margin and do not degrade circuit performance when the original design voltage requirement is 160 V or lower.

Q: Are there mechanical compatibility concerns with substitute parts?

A: All substitute parts maintain the same lead spacing (0.138" / 4.60 mm), diameter (0.315" / 8.00 mm), and mounting type (Through Hole, Radial). The UPJ2D2R2MPD1TD has a reduced height of 0.492" (12.50 mm) compared to 0.512" (13.00 mm) for the original part. This reduction is acceptable for most applications but should be verified if the PCB layout has height constraints.

Q: What is the difference between the UPJ and UPM series?

A: The UPJ series is designated for general purpose applications, while the UPM series includes AEC-Q200 automotive qualification. Both series share identical electrical and mechanical specifications for the 2.2 µF 160 V and 200 V ratings. Selection depends on whether automotive-grade reliability certification is required.

Q: Why is the UPM2C2R2MPD1TD marked as "Obsolete"?

A: The UPM2C2R2MPD1TD carries "Obsolete" product status, indicating it is no longer in active production. While inventory may be available, this part should not be selected for new designs. The UPJ2C2R2MPD1TD or upgrade alternatives are preferred for ongoing applications.

Q: Does REACH compliance status affect substitution decisions?

A: REACH status indicates regulatory compliance requirements. The original UPJ2C2R2MPD1TD is "REACH Unaffected." Substitute parts UPM2D2R2MPD1TD and UPM2C2R2MPD1TD are "REACH Affected," requiring verification of compliance obligations based on end-use geography and application. UPJ2D2R2MPD1TD and UPW2E2R2MPD1TD are "REACH Unaffected," matching the original part's compliance profile.

Q: Can I substitute the UPM2C2R2MPD1TD for the UPJ2C2R2MPD1TD?

A: Electrically and mechanically, yes. However, the UPM2C2R2MPD1TD is marked "Obsolete," making it unsuitable for new applications or long-term supply assurance. The UPJ2C2R2MPD1TD remains the preferred equivalent, with UPJ2D2R2MPD1TD, UPM2D2R2MPD1TD, or UPW2E2R2MPD1TD as recommended upgrades.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message