UPA1E331MPD1TA Equivalent & Substitute Parts

Part Overview

The UPA1E331MPD1TA is a 330 µF, 25 V aluminum electrolytic capacitor manufactured by Nichicon in the UPA series. This radial, through-hole component is rated for 3000 hours at 105°C and is designed for general-purpose applications requiring reliable energy storage and filtering. The part is currently in active production status with full RoHS3 and REACH compliance. Substitute parts are identified when equivalent electrical and mechanical specifications are required due to inventory constraints, supply chain considerations, or design flexibility needs.

Substiute Parts

UPA1E331MPD1TA

NichiconIn Stock: 1128UPA1E331MPD1TA Datasheet

Current PartRFQ

UPA1E331MPD1TD

NichiconIn Stock: 6032UPA1E331MPD1TD Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the UPA1E331MPD1TA is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part UPA1E331MPD1TD maintains identical specifications in the following key areas:

• Capacitance value: 330 µF
• Rated voltage: 25 V
• Tolerance: ±20%
• Thermal rating: 3000 Hrs @ 105°C
• Operating temperature range: -55°C ~ 105°C
• Ripple current performance: 409.5 mA @ 120 Hz
• Impedance: 90 mOhms
• Physical dimensions and lead spacing: 0.315" Dia (8.00 mm), 0.512" height, 0.138" lead spacing
• Mounting configuration: Through-hole radial can package
• Compliance certifications: ROHS3 Compliant, REACH Affected

Both parts are manufactured by Nichicon within the UPA series and share identical packaging (Cut Tape), polarization (Polar), and application classification (General Purpose).

Parameter Comparison

Engineering Selection Recommendations

Both the UPA1E331MPD1TA and UPA1E331MPD1TD are functionally equivalent for circuit applications requiring a 330 µF, 25 V aluminum electrolytic capacitor with through-hole radial mounting. Selection between these parts may be based on inventory availability, supply chain lead times, or procurement preferences, as all electrical performance, thermal characteristics, and compliance certifications are identical.

Both parts maintain active production status with full ROHS3 compliance and REACH regulatory adherence, ensuring long-term availability and regulatory consistency in manufacturing environments subject to environmental and hazardous substance restrictions.

Frequently Asked Questions (FAQ)

Q: Can UPA1E331MPD1TD be used as a direct replacement for UPA1E331MPD1TA?

A: Yes. Both parts are electrically and mechanically identical across all specified parameters, including capacitance, voltage rating, temperature performance, ripple current capability, physical dimensions, and lead spacing. Direct substitution is valid for any application using the UPA1E331MPD1TA.

Q: Are there any differences in thermal performance between these parts?

A: No. Both parts are rated for 3000 hours at 105°C and operate across the identical temperature range of -55°C to 105°C with matching impedance and ripple current specifications.

Q: Do both parts fit the same PCB footprint?

A: Yes. The UPA1E331MPD1TA and UPA1E331MPD1TD share identical physical dimensions (0.315" diameter, 0.512" maximum height) and lead spacing (0.138" or 4.60 mm), ensuring compatibility with the same through-hole PCB layout.

Q: Are compliance certifications identical?

A: Yes. Both parts carry ROHS3 compliance and REACH regulatory status, meeting the same environmental and hazardous substance requirements.

Q: What distinguishes these two part numbers if they are equivalent?

A: The part numbers differ only in their suffix designation (MPD1TA versus MPD1TD), which typically reflects internal manufacturing or packaging batch tracking by Nichicon. All functional and performance specifications remain identical.