Equivalent & Substitute Parts for ULT-5/5-D48PM-C

Part Overview

The ULT-5/5-D48PM-C from Murata Power Solutions Inc. is an isolated DC DC converter module providing a single 5V output at up to 5A with an input range of 36V to 75V and a rated power of 25W. This part is categorized under isolated DC-DC converters for ITE (Commercial) applications and features a surface mount 8-SMD 1/32 Brick package. The product status is listed as obsolete, making it necessary to identify alternative models for continued design, repair, or production support.

Substiute Parts

ULT-5/5-D48PM-C

Murata Power Solutions Inc.In Stock: 842ULT-5/5-D48PM-C Datasheet

Current PartRFQ

ULT-5/5-D48N-C

Murata Power Solutions Inc.In Stock: 1079ULT-5/5-D48N-C Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution is performed strictly based on matching electrical and mechanical parameters, including input voltage range, output voltage and current, power rating, isolation voltage, features, and environmental ratings. Additional confirmation of form factor is achieved by comparing mounting type, package, and size. Compliance requirements such as RoHS, REACH status, and moisture sensitivity level are also considered as per provided information.

Key substitution parameters:

• Input and output voltage ranges
• Maximum output current and power rating
• Isolation voltage
• Operational temperature range
• Package type and mounting configuration
• Electrical features (Remote On/Off, UVLO)
• Environmental and compliance parameters (RoHS, REACH, MSL)

Parameter Comparison

Engineering Selection Recommendations

Select substitute parts by confirming identical electrical and mechanical parameters as outlined. Both ULT-5/5-D48PM-C and ULT-5/5-D48N-C are RoHS and REACH compliant with matching ECCN and HTSUS codes. ULT-5/5-D48N-C features MSL 1 (Unlimited), whereas the main part is MSL 2 (1 Year). Comply with these parameters as required by design or process controls.

Frequently Asked Questions (FAQ)

Q1: What are the primary factors for substituting ULT-5/5-D48PM-C?
A1: Match input voltage range, output voltage/current, power rating, isolation, temperature range, control features, package type, mounting, compliance status, and moisture sensitivity level.

Q2: Are there mechanical differences with ULT-5/5-D48N-C?
A2: ULT-5/5-D48PM-C is surface mount (8-SMD Module), while ULT-5/5-D48N-C is through hole (8-DIP Module). Both share identical dimensions.

Q3: Does the control logic differ between these parts?
A3: ULT-5/5-D48PM-C features Enable (Active High), while ULT-5/5-D48N-C uses Enable (Active Low). Consider the corresponding logic in system design.

Q4: What environmental or compliance differences exist?
A4: Both parts are REACH unaffected and RoHS compliant. MSL is 2 (1 Year) for ULT-5/5-D48PM-C and 1 (Unlimited) for ULT-5/5-D48N-C.

Q5: Does the substitute match all electrical specifications?
A5: ULT-5/5-D48N-C matches all specified electrical parameters for substitution.

Q6: Is ULT-5/5-D48N-C also obsolete?
A6: ULT-5/5-D48N-C is listed as obsolete. Availability should be confirmed against inventory requirements.