ULQ-12/8-D24P-C Equivalent & Substitute Parts Reference

Part Overview

Murata Power Solutions Inc. ULQ-12/8-D24P-C is an isolated DC DC converter designed for ITE commercial applications, specified with a single 12V 8A output and 96W power rating. As an obsolete product, it is essential to identify direct alternative models to support ongoing designs and inventory sustainability for systems requiring identical electrical and mechanical performance parameters.

Substiute Parts

ULQ-12/8-D24P-C

Murata Power Solutions Inc.In Stock: 713ULQ-12/8-D24P-C Datasheet

Current PartRFQ

UVQ-12/8-D24P-C

Murata Power Solutions Inc.In Stock: 888UVQ-12/8-D24P-C Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts are selected strictly based on match to the following critical parameters: input voltage range (18V–36V), output voltage (12V), output current (8A), output power (96 W), isolation voltage (2 kV), number of outputs (1), mounting type (through hole), package/case (8-DIP Module, 1/4 Brick), control features (Enable, Active High), and application (ITE Commercial). Compliance factors such as Moisture Sensitivity Level, REACH status, ECCN, and operating temperature range are also considered.

Parameter Comparison

Engineering Selection Recommendations

The ULQ-12/8-D24P-C is classified as obsolete. UVQ-12/8-D24P-C is listed with a “Last Time Buy” status and complies with RoHS3, REACH, and has matching Moisture Sensitivity Level and ECCN/HTSUS codes. Inventory levels for both parts are sufficient for immediate needs. Substitution is supported strictly by alignment of key electrical, mechanical, and compliance parameters.

Frequently Asked Questions (FAQ)

Q1: What are the critical criteria for substituting ULQ-12/8-D24P-C with UVQ-12/8-D24P-C?
A1: Substitution is determined by matching input voltage, output voltage, output current, power rating, isolation voltage, mounting type, package/case size, control features, and compliance certifications.

Q2: Are there differences in mounting or sizing that affect interchangeability?
A2: Both models use the through hole mounting type and 8-DIP Module, 1/4 Brick package. There are minor dimensional variances; review specific mounting constraints when selecting.

Q3: Are features such as Remote On/Off and safety protections consistent?
A3: Both parts include Remote On/Off and protection features. UVQ-12/8-D24P-C additionally specifies OCP (Overcurrent Protection).

Q4: Is compliance status the same for both parts?
A4: Both models are REACH Unaffected, have ECCN EAR99, HTSUS 8504.40.9580, and MSL 1 (Unlimited). UVQ-12/8-D24P-C specifies ROHS3 compliance.

Q5: Why is substitution necessary for the ULQ-12/8-D24P-C?
A5: The main part is obsolete; substitution ensures ongoing system support with identical or improved parameters.