Request Quote
(Ships tomorrow)
UFS360JE3/TR13 Equivalent & Substitute Parts
Part Overview
The UFS360JE3/TR13 is a general-purpose rectifier diode manufactured by Microchip Technology, rated for 600 V DC reverse voltage and 3 A average rectified current in a surface mount DO-214AB (SMC) package. This component is classified as a fast recovery diode with a reverse recovery time of 60 ns and is actively produced with RoHS3 compliance. Alternative equivalent parts are necessary when the primary part experiences supply constraints, extended lead times, or when design requirements permit substitution within specified electrical and mechanical parameters.
Substiute Parts
Key Parameters
| Parameter | Value | Unit |
|---|---|---|
| Voltage - DC Reverse (Vr) (Max) | 600 | V |
| Current - Average Rectified (Io) | 3 | A |
| Voltage - Forward (Vf) (Max) @ If | 1.2 V @ 3 A | V |
| Reverse Recovery Time (trr) | 60 | ns |
| Current - Reverse Leakage @ Vr | 10 | µA @ 600 V |
| Speed Classification | Fast Recovery ≤ 500ns | - |
| Package / Case | DO-214AB, SMC | - |
| Mounting Type | Surface Mount | - |
| Operating Temperature - Junction | -55 to 175 | °C |
| RoHS Status | ROHS3 Compliant | - |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) | - |
Substitute Part Grouping Explanation
Substitution of the UFS360JE3/TR13 is determined by the following critical parameters:
Mandatory Matching Parameters:
- Voltage - DC Reverse (Vr) (Max): 600 V
- Current - Average Rectified (Io): 3 A
- Package / Case: DO-214AB, SMC
- Mounting Type: Surface Mount
- RoHS Status: ROHS3 Compliant
- Moisture Sensitivity Level (MSL): 1 (Unlimited)
Allowable Variation Parameters:
- Voltage - Forward (Vf) (Max) @ If: Within design tolerance
- Reverse Recovery Time (trr): Fast recovery classification (≤ 500 ns) or standard recovery (> 500 ns) depending on circuit requirements
- Current - Reverse Leakage @ Vr: Within acceptable leakage specifications
- Operating Temperature - Junction: Must encompass or exceed the application's required range
Substitute parts are grouped into two categories: Direct Equivalents (matching all critical parameters including recovery speed) and Similar Equivalents (matching voltage, current, and package specifications with allowable variations in recovery characteristics and forward voltage).
Parameter Comparison
| Part Number | Manufacturer | Vr (Max) [V] | Io [A] | Vf (Max) [V] | Speed Classification | trr [ns] | Ir @ Vr [µA] | Tj (°C) | Package |
|---|---|---|---|---|---|---|---|---|---|
| UFS360JE3/TR13 | Microchip Technology | 600 | 3 | 1.2 @ 3A | Fast Recovery ≤ 500ns | 60 | 10 @ 600V | -55 to 175 | DO-214AB |
| S3J-TP | Micro Commercial Co | 600 | 3 | 1.2 @ 3A | Standard Recovery > 500ns | - | 10 @ 600V | -55 to 150 | DO-214AB |
| ER3J-TP | Micro Commercial Co | 600 | 3 | 1.7 @ 3A | Fast Recovery ≤ 500ns | 35 | 5 @ 600V | -50 to 175 | DO-214AB |
| ES3J | Good-Ark Semiconductor | 600 | 3 | 1.7 @ 3A | Fast Recovery ≤ 500ns | 35 | 10 @ 600V | -55 to 150 | DO-214AB |
| MURS360T3G | onsemi | 600 | 3 | 1.25 @ 3A | Fast Recovery ≤ 500ns | 75 | 10 @ 600V | -65 to 175 | DO-214AB |
| RS3JHE3_A/H | Vishay General Semiconductor | 600 | 3 | 1.3 @ 2.5A | Fast Recovery ≤ 500ns | 250 | 10 @ 600V | -55 to 150 | DO-214AB |
| S10CJHM3/I | Vishay General Semiconductor | 600 | 10 | 1.0 @ 10A | Standard Recovery > 500ns | 5000 | 10 @ 600V | -55 to 150 | DO-214AB |
| S3J-13-F | Diodes Incorporated | 600 | 3 | 1.15 @ 3A | Standard Recovery > 500ns | - | 10 @ 600V | -65 to 150 | DO-214AB |
| S3JHE3_A/H | Vishay General Semiconductor | 600 | 3 | 1.15 @ 2.5A | Standard Recovery > 500ns | 2500 | 10 @ 600V | -55 to 150 | DO-214AB |
Engineering Selection Recommendations
Direct Equivalent (Preferred for Pin-Compatible Replacement):
S3J-TP (Micro Commercial Co) is the primary direct equivalent, matching the UFS360JE3/TR13 in voltage rating, current capacity, forward voltage, and package configuration. Both components are RoHS3 compliant with MSL 1 rating. The primary difference is recovery speed classification; S3J-TP operates as a standard recovery diode (> 500 ns) compared to the fast recovery specification of the UFS360JE3/TR13. This substitution is valid for applications where standard recovery performance is acceptable.
Fast Recovery Equivalents:
ER3J-TP, ES3J, MURS360T3G, and RS3JHE3_A/H maintain the fast recovery speed classification (≤ 500 ns) of the original part. ER3J-TP and ES3J feature the fastest recovery times (35 ns), while MURS360T3G provides 75 ns recovery time. RS3JHE3_A/H carries AEC-Q101 automotive qualification and is suitable for automotive applications. All fast recovery alternatives are RoHS3 compliant with MSL 1 rating.
Current Rating Consideration:
S10CJHM3/I is rated for 10 A average rectified current and is not a direct substitute for 3 A applications. This part is listed as a similar equivalent only when circuit design permits operation at higher current capacity with corresponding thermal management adjustments.
Temperature Range Consideration:
The UFS360JE3/TR13 operates to 175°C junction temperature. Most substitute parts are rated to 150°C maximum junction temperature, with exceptions including MURS360T3G and S3J-13-F (both -65 to 175°C). Applications requiring full 175°C operation must select MURS360T3G or confirm thermal design compatibility with 150°C-rated alternatives.
Automotive Applications:
RS3JHE3_A/H and S3JHE3_A/H carry AEC-Q101 qualification from Vishay General Semiconductor and are suitable for automotive-grade applications requiring certified component lineage.
Frequently Asked Questions (FAQ)
Q: Can S3J-TP replace UFS360JE3/TR13 in all applications?
A: S3J-TP is electrically compatible for voltage and current ratings and uses the identical DO-214AB package. The primary difference is recovery speed classification: S3J-TP is standard recovery (> 500 ns) while UFS360JE3/TR13 is fast recovery (≤ 500 ns, 60 ns typical). Substitution is valid when circuit design does not require fast recovery performance. Applications sensitive to switching speed or EMI characteristics must evaluate this parameter.
Q: What is the difference between fast recovery and standard recovery diodes?
A: Recovery speed refers to the reverse recovery time (trr), which is the time required for a diode to stop conducting when reverse bias is applied. Fast recovery diodes (≤ 500 ns) are used in high-frequency switching applications and power supplies where rapid switching is critical. Standard recovery diodes (> 500 ns) are suitable for lower-frequency applications and general-purpose rectification. The UFS360JE3/TR13 specifies 60 ns recovery time, making it suitable for applications requiring fast switching response.
Q: Are all substitute parts available in the same packaging?
A: Yes, all listed substitute parts use the DO-214AB (SMC) surface mount package, ensuring mechanical and thermal compatibility. Packaging variations exist only in tape format: some parts are supplied in Tape & Reel (TR) format while others are available in Cut Tape (CT) & Digi-Reel® format. Verify packaging format compatibility with your procurement and assembly processes.
Q: Which substitute part has the lowest forward voltage drop?
A: S10CJHM3/I exhibits the lowest forward voltage at 1.0 V @ 10 A; however, this part is rated for 10 A current capacity and is not a direct 3 A equivalent. Among true 3 A equivalents, S3J-13-F and S3JHE3_A/H offer the lowest forward voltage at 1.15 V @ 2.5 A and 1.15 V @ 2.5 A respectively. The original UFS360JE3/TR13 specifies 1.2 V @ 3 A.
Q: Can I use ER3J-TP or ES3J as direct replacements?
A: ER3J-TP and ES3J are electrically compatible substitutes with identical voltage and current ratings. Both feature fast recovery performance (35 ns) superior to the original part (60 ns). The primary consideration is forward voltage: both specify 1.7 V @ 3 A compared to 1.2 V @ 3 A for UFS360JE3/TR13. This higher forward voltage results in increased power dissipation and heat generation. Substitution is valid when thermal design accommodates this difference.
Q: Are automotive-qualified alternatives available?
A: Yes, RS3JHE3_A/H and S3JHE3_A/H from Vishay General Semiconductor carry AEC-Q101 automotive qualification. Both are rated for 600 V, 3 A with DO-214AB packaging and RoHS3 compliance. RS3JHE3_A/H features fast recovery performance (250 ns) while S3JHE3_A/H is standard recovery (2500 ns). Select based on your application's recovery speed requirements.
Q: What is the maximum junction temperature for substitute parts?
A: Most substitute parts are rated to -55°C to 150°C junction temperature range. Exceptions include MURS360T3G and S3J-13-F, both rated to -65°C to 175°C. The original UFS360JE3/TR13 is rated to -55°C to 175°C. Applications requiring full 175°C operation must select MURS360T3G or confirm thermal design compatibility with 150°C-rated alternatives.
Q: Do all substitute parts have the same moisture sensitivity level?
A: Yes, all listed substitute parts carry MSL 1 (Unlimited) moisture sensitivity level, matching the original UFS360JE3/TR13. This classification indicates no moisture sensitivity and no special storage or handling requirements.
Q: Are all substitute parts RoHS3 compliant?
A: Yes, all listed substitute parts are RoHS3 compliant, matching the compliance status of the original UFS360JE3/TR13. All parts are also REACH Unaffected and carry EAR99 ECCN classification.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts