UES1V4R7MDM1TD Equivalent & Substitute Parts

Part Overview

The UES1V4R7MDM1TD is a 4.7 µF, 35 V aluminum electrolytic capacitor in radial configuration manufactured by Nichicon. This component is rated for 1000 hours at 85°C and is designed for audio applications. The part carries an obsolete product status, making equivalent and substitute parts necessary for ongoing design support and procurement continuity.

Substiute Parts

UES1V4R7MDM1TD

NichiconIn Stock: 7206UES1V4R7MDM1TD Datasheet

Current PartRFQ

UVP1H4R7MDD1TD

NichiconIn Stock: 1726UVP1H4R7MDD1TD Datasheet

UpgradeRFQ

UVP1V4R7MDD1TD

NichiconIn Stock: 5141UVP1V4R7MDD1TD Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the UES1V4R7MDM1TD is determined by the following critical parameters:

• Capacitance: 4.7 µF (exact match required)
• Tolerance: ±20% (exact match required)
• Voltage Rating: 35 V minimum (equal or higher voltage ratings are acceptable)
• Polarization: Bi-Polar (exact match required)
• Lead Spacing: 0.098" (2.50mm) (exact match required for PCB compatibility)
• Physical Dimensions: 0.197" Dia (5.00mm) and 0.492" Height (exact match required for mechanical fit)
• Mounting Type: Through Hole (exact match required)
• Package / Case: Radial, Can (exact match required)

The substitute parts identified maintain identical electrical specifications and mechanical form factors. Variations in lifetime rating and ripple current specifications do not affect substitution eligibility, as these represent performance enhancements or different application classifications rather than incompatibilities.

Parameter Comparison

Engineering Selection Recommendations

Both substitute parts are manufactured by Nichicon and maintain ROHS3 compliance and REACH unaffected status, consistent with the original component.

UVP1V4R7MDD1TD provides direct electrical equivalence with identical 35 V voltage rating while offering extended lifetime (2000 Hrs @ 85°C versus 1000 Hrs @ 85°C). This part is suitable for applications requiring the original voltage specification with improved reliability margins.

UVP1H4R7MDD1TD provides elevated voltage rating (50 V versus 35 V) with extended lifetime (2000 Hrs @ 85°C). This part is suitable for applications where higher voltage headroom is beneficial or where circuit design permits operation at higher voltage ratings without functional impact.

Both substitute parts maintain identical mechanical form factors and through-hole mounting compatibility with the original design.

Frequently Asked Questions (FAQ)

Q: Can UVP1H4R7MDD1TD be used in place of UES1V4R7MDM1TD?

A: Yes. The UVP1H4R7MDD1TD maintains identical capacitance (4.7 µF), tolerance (±20%), polarization (Bi-Polar), and mechanical dimensions. The 50 V rating exceeds the 35 V requirement, providing additional voltage margin. Physical form factor and lead spacing are identical, ensuring PCB compatibility.

Q: Can UVP1V4R7MDD1TD be used in place of UES1V4R7MDM1TD?

A: Yes. The UVP1V4R7MDD1TD is electrically and mechanically identical to the original part, with matching 35 V voltage rating, 4.7 µF capacitance, ±20% tolerance, and Bi-Polar polarization. Lead spacing and physical dimensions are identical. The extended lifetime rating (2000 Hrs @ 85°C) represents an improvement over the original specification.

Q: Are there differences in ripple current specifications?

A: The substitute parts specify ripple current at 34 mA @ 120 Hz. The original part does not provide ripple current data in the available specifications. This parameter does not affect substitution eligibility for applications within the rated voltage and capacitance specifications.

Q: Do all parts use the same packaging?

A: Yes. All three parts use Cut Tape (CT) packaging and are configured as Radial, Can through-hole components with identical lead spacing (0.098" / 2.50mm) and physical dimensions (0.197" Dia / 5.00mm, 0.492" Height).

Q: Are there compliance differences between the parts?

A: No. All three parts are ROHS3 Compliant, REACH Unaffected, and carry identical ECCN (EAR99) and HTSUS (8532.22.0020) classifications.