Equivalent & Substitute Parts for UES0J471MPM1TO

Part Overview

The UES0J471MPM1TO is a 470 µF, 6.3 V aluminum electrolytic capacitor in radial, can package manufactured by Nichicon. This component is rated for 1000 hours at 85°C and is designed for audio applications. The part is currently active in production. Equivalent and substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design requirements permit higher voltage or extended lifetime ratings.

Substiute Parts

UES0J471MPM1TO

NichiconIn Stock: 973UES0J471MPM1TO Datasheet

Current PartRFQ

UVP1C471MPD1TD

NichiconIn Stock: 1295UVP1C471MPD1TD Datasheet

UpgradeRFQ

UES0J471MPM1TD

NichiconIn Stock: 1386UES0J471MPM1TD Datasheet

Parametric EquivalentRFQ

ECE-A1CN471UB

Panasonic Electronic ComponentsIn Stock: 1258ECE-A1CN471UB Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the UES0J471MPM1TO is determined by the following criteria:

Parametric Equivalents maintain identical electrical specifications: 470 µF capacitance, 6.3 V rated voltage, ±20% tolerance, 1000 hours lifetime at 85°C, and identical physical dimensions. These parts are direct replacements with no circuit redesign required.

Upgrade Substitutes increase the rated voltage to 16 V while maintaining 470 µF capacitance and ±20% tolerance. These parts provide enhanced voltage margin and extended lifetime (2000 hours at 85°C). Physical dimensions remain compatible with the original footprint. Upgrade substitutes are suitable when circuit design permits higher voltage ratings and improved reliability is desired.

All substitute parts maintain the same lead spacing (5.00mm), case diameter (10.00mm), through-hole mounting type, and radial can package configuration as the main part.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement: UES0J471MPM1TD is the parametric equivalent and provides identical electrical and mechanical specifications. This part is suitable for direct substitution in existing designs. Note that this part is marked "Not For New Designs," indicating it may have limited future availability.

For New Designs or Enhanced Reliability: ECE-A1CN471UB is recommended as the primary upgrade substitute. This Panasonic part maintains active product status, ensuring long-term availability. It provides 16 V rated voltage and 2000 hours lifetime at 85°C, delivering improved voltage margin and extended operational life. The 0.020" (0.50mm) increase in seated height is within typical PCB layout tolerances for through-hole components.

Alternative Upgrade Option: UVP1C471MPD1TD is a Nichicon upgrade substitute offering identical electrical improvements to ECE-A1CN471UB. However, this part is marked "Not For New Designs," which may limit its suitability for long-term production applications.

All substitute parts maintain ROHS3 compliance and are suitable for the same through-hole mounting footprint as the original part.

Frequently Asked Questions (FAQ)

Q: Can UES0J471MPM1TD be used as a direct replacement for UES0J471MPM1TO?

A: Yes. UES0J471MPM1TD is a parametric equivalent with identical capacitance (470 µF), voltage rating (6.3 V), tolerance (±20%), lifetime (1000 Hrs @ 85°C), and physical dimensions. No circuit modification is required. However, verify part availability, as this part is marked "Not For New Designs."

Q: What is the difference between parametric equivalents and upgrade substitutes?

A: Parametric equivalents maintain all electrical and mechanical specifications of the original part. Upgrade substitutes increase the rated voltage (from 6.3 V to 16 V) and extend the lifetime rating (from 1000 to 2000 hours at 85°C) while preserving capacitance and tolerance. Upgrade substitutes are suitable when circuit design permits higher voltage operation.

Q: Are the upgrade substitutes physically compatible with the original PCB layout?

A: Yes. All substitute parts maintain the same lead spacing (5.00mm) and case diameter (10.00mm). The upgrade substitutes have a maximum seated height of 0.866" (22.00mm) compared to 0.846" (21.50mm) for the original part. This 0.020" (0.50mm) difference is within standard through-hole component tolerances and does not affect PCB compatibility.

Q: Which substitute part should be used for new designs?

A: ECE-A1CN471UB is recommended for new designs. This part maintains active product status, ensuring availability throughout the design lifecycle. It provides enhanced voltage rating and extended lifetime, delivering improved reliability margins.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All parts listed—UES0J471MPM1TO, UES0J471MPM1TD, UVP1C471MPD1TD, and ECE-A1CN471UB—are ROHS3 compliant.

Q: What is the ripple current rating for the upgrade substitutes?

A: UVP1C471MPD1TD is rated for 485 mA at 120 Hz (low frequency) and 727.5 mA at 10 kHz (high frequency). ECE-A1CN471UB is rated for 380 mA at 120 Hz (low frequency) and 646 mA at 10 kHz (high frequency). Verify ripple current requirements in your application before selection.