Equivalent & Substitute Parts for UEE-12/12.5-D48P-C

Part Overview

Murata Power Solutions Inc. model UEE-12/12.5-D48P-C is a DC DC Converter categorized as an isolated module, offering a single 12V output at up to 12.5A with a 36V to 75V input range. It is rated for 150W and features remote on/off, OCP, OTP, OVP, SCP, and UVLO protection with through hole mounting in an 8-DIP Module, 1/8 Brick package. The module holds RoHS compliance, is suited for ITE (Commercial) applications, and offers 2.25 kV isolation. With operating temperature specified from -40°C to 85°C, this product is currently marked "Not For New Designs." It is necessary to identify substitute DC DC converter models as this part is not recommended for new designs and may be subject to future discontinuation or limited availability.

Substiute Parts

UEE-12/12.5-D48P-C

Murata Power Solutions Inc.In Stock: 846UEE-12/12.5-D48P-C Datasheet

Current PartRFQ

UEE-12/12.5-D48N-C

Murata Power Solutions Inc.In Stock: 1065UEE-12/12.5-D48N-C Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for DC DC converters in the isolated module category are determined by strict matching of key functional specifications, electrical ratings, mechanical package, mounting type, and regulatory compliance. Substitution for UEE-12/12.5-D48P-C occurs only if the following parameters are identical across the compared models:

• Series
• Type (Isolated Module)
• Output configuration (1 output)
• Voltage - Input (Min/Max)
• Voltage - Output 1
• Current - Output (Max)
• Power (Watts)
• Voltage - Isolation
• Applications
• Feature set (Remote On/Off, OCP, OTP, OVP, SCP, UVLO)
• Operating Temperature
• Efficiency
• Mounting Type
• Package / Case
• Size / Dimension
• Control Features
• RoHS Status
• Moisture Sensitivity Level (MSL)
• REACH Status
• ECCN
• HTSUS

Parameter Comparison

Engineering Selection Recommendations

The main part, UEE-12/12.5-D48P-C, is designated "Not For New Designs", indicating it should not be used for new product platforms or future developments. The substitute part, UEE-12/12.5-D48N-C, is "Active" and maintains identical electrical, mechanical, and compliance parameters as listed. Both modules are RoHS and REACH compliant and share MSL, ECCN, and HTSUS codes. When selecting substitutes in this DC DC Converter category, verify the control features—UEE-12/12.5-D48P-C is "Active High" and UEE-12/12.5-D48N-C is "Active Low". This is the only parameter difference affecting control logic integration.

Frequently Asked Questions (FAQ)

Q: What criteria are used to determine compatibility between UEE-12/12.5-D48P-C and substitute DC DC converters?
A: Compatibility is based strictly on matching series, output configuration, input and output voltages, output current, isolation rating, protection features, operating temperature, mounting type, package type, physical dimensions, and regulatory compliance parameters.

Q: Are there differences in the electrical or mechanical characteristics between UEE-12/12.5-D48P-C and UEE-12/12.5-D48N-C?
A: All core electrical and mechanical parameters are identical except for control features, which differ in enable logic level ("Active High" vs. "Active Low").

Q: Is the substitute part suitable for commercial ITE applications?
A: Yes, both models specify suitability for ITE (Commercial) applications.

Q: What are the considerations for control circuit design when switching between these substitute parts?
A: Control logic must match the enable signal polarity ("Active High" for UEE-12/12.5-D48P-C, "Active Low" for UEE-12/12.5-D48N-C).

Q: Are both parts compliant with current RoHS and REACH standards?
A: Yes, UEE-12/12.5-D48P-C is RoHS compliant; UEE-12/12.5-D48N-C is ROHS3 compliant. Both are REACH unaffected.

Q: Is the mounting and footprint identical for both parts?
A: Both parts use the same 8-DIP Module, 1/8 Brick package, with matching dimensions and through hole mounting.