Equivalent & Substitute Parts for UBX2C330MHL1TO

Part Overview

The UBX2C330MHL1TO is a 33 µF, 160 V aluminum electrolytic capacitor in radial configuration manufactured by Nichicon. This component is designed for automotive applications with a rated lifetime of 1000 hours at 150°C and operates across the temperature range of -40°C to 150°C. The part is currently active in production status with ROHS3 compliance and REACH unaffected classification.

Substitute parts are identified when design requirements allow for modified electrical parameters while maintaining mechanical compatibility and functional equivalence within the application circuit.

Substiute Parts

UBX2C330MHL1TO

NichiconIn Stock: 1491UBX2C330MHL1TO Datasheet

Current PartRFQ

UBX2D330MHL1TO

NichiconIn Stock: 1192UBX2D330MHL1TO Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

The UBX2D330MHL1TO qualifies as a substitute for the UBX2C330MHL1TO based on the following criteria:

Matching Parameters:

• Capacitance: 33 µF (identical)
• Tolerance: ±20% (identical)
• Lead Spacing: 0.197" (5.00 mm) (identical)
• Package Diameter: 0.492" (12.50 mm) (identical)
• Package Height: 0.846" (21.50 mm) (identical)
• Mounting Type: Through Hole Radial (identical)
• Operating Temperature Range: -40°C ~ 150°C (identical)
• Lifetime @ Temperature: 1000 Hrs @ 150°C (identical)
• Polarization: Polar (identical)
• Series: UBX (identical)
• Manufacturer: Nichicon (identical)

Modified Parameter:

• Voltage Rating: 200 V (upgraded from 160 V)

The voltage rating increase from 160 V to 200 V represents an upgrade that maintains backward compatibility in circuits designed for the original 160 V specification.

Parameter Comparison

Engineering Selection Recommendations

Both the UBX2C330MHL1TO and UBX2D330MHL1TO are active production parts from Nichicon with identical ROHS3 compliance and REACH unaffected status. The UBX2D330MHL1TO provides a higher voltage rating of 200 V compared to the 160 V specification of the main part, while maintaining all other electrical and mechanical parameters. Selection between these parts depends on circuit voltage requirements and design margin considerations. Both parts are suitable for automotive applications with equivalent thermal performance and reliability characteristics.

Frequently Asked Questions (FAQ)

Q: Can the UBX2D330MHL1TO replace the UBX2C330MHL1TO in an existing design?

A: Yes, the UBX2D330MHL1TO is mechanically and electrically compatible as a substitute. The 200 V rating provides additional voltage margin over the original 160 V specification. Verify that the circuit design does not depend on the specific voltage rating of the original part.

Q: Are the physical dimensions identical between these parts?

A: Yes. Both parts share identical lead spacing (0.197" / 5.00 mm), package diameter (0.492" / 12.50 mm), and package height (0.846" / 21.50 mm). Through-hole mounting compatibility is maintained.

Q: Do both parts meet the same compliance standards?

A: Yes. Both UBX2C330MHL1TO and UBX2D330MHL1TO are ROHS3 compliant and REACH unaffected, with identical automotive application ratings.

Q: What is the difference in ripple current specifications?

A: The UBX2C330MHL1TO specifies 230 mA @ 120 Hz and 414 mA @ 100 kHz. The UBX2D330MHL1TO specifies 210 mA @ 120 Hz and 378 mA @ 100 kHz. These differences reflect the higher voltage rating of the substitute part.

Q: Are both parts available in the same packaging format?

A: Yes. Both parts are supplied in Cut Tape (CT) packaging with identical through-hole radial configuration.