UBT2E100MPD8 Equivalent & Substitute Parts

Part Overview

The UBT2E100MPD8 is a 10 µF, 250 V aluminum electrolytic capacitor in radial, can package manufactured by Nichicon. This component is rated for automotive applications with a 2000-hour lifetime at 125°C operating temperature. The part maintains Active product status and is ROHS3 compliant. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and performance ratings to ensure direct functional replacement in circuit designs.

Substiute Parts

UBT2E100MPD8

NichiconIn Stock: 1467UBT2E100MPD8 Datasheet

Current PartRFQ

UBT2E100MPD8

NichiconIn Stock: 1467UBT2E100MPD8 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the UBT2E100MPD8 are determined by strict equivalence across the following critical parameters:

• Capacitance value: 10 µF (exact match required)
• Voltage rating: 250 V (exact match required)
• Tolerance: ±20% (exact match required)
• Polarization: Polar (exact match required)
• Mounting type: Through Hole (exact match required)
• Package type: Radial, Can (exact match required)
• Lead spacing: 0.197" (5.00mm) (exact match required)
• Physical dimensions: 0.394" Dia × 0.866" Height (exact match required)
• Operating temperature range: -40°C ~ 125°C (exact match required)
• Lifetime rating: 2000 Hrs @ 125°C (exact match or better required)

Substitutes must maintain compliance with ROHS3 and automotive application requirements. No deviations from these parameters are permitted for direct replacement.

Parameter Comparison

Engineering Selection Recommendations

The UBT2E100MPD8 maintains Active product status with full ROHS3 compliance and REACH compliance certification. Selection of equivalent parts must prioritize components with identical Active status and matching compliance certifications. The automotive application classification requires that substitute parts maintain equivalent reliability ratings and thermal performance specifications. All substitute candidates must demonstrate the same 2000-hour lifetime rating at 125°C to ensure equivalent field performance in automotive circuit designs.

Frequently Asked Questions (FAQ)

Q: What determines if a part can substitute for the UBT2E100MPD8?

A: Direct substitution requires exact matching of capacitance (10 µF), voltage rating (250 V), tolerance (±20%), polarization (Polar), mounting type (Through Hole), package type (Radial, Can), lead spacing (5.00mm), physical dimensions (10.00mm diameter × 22.00mm height), operating temperature range (-40°C ~ 125°C), and lifetime rating (2000 Hrs @ 125°C). All compliance certifications must also match.

Q: Can I use a different voltage rating if it is higher?

A: No. The voltage rating must be exactly 250 V. Higher voltage ratings result in different physical dimensions and lead spacing, which are not compatible with the circuit board layout designed for the UBT2E100MPD8.

Q: Are there any mechanical compatibility concerns with substitutes?

A: All substitute parts must maintain identical lead spacing (5.00mm) and physical dimensions (10.00mm diameter, 22.00mm maximum height). Any deviation will result in improper fit in the through-hole mounting pattern.

Q: What compliance certifications must substitute parts maintain?

A: Substitute parts must be ROHS3 compliant and REACH affected, matching the certification status of the UBT2E100MPD8. Automotive application requirements necessitate these compliance standards.

Q: Does capacitance tolerance affect substitution eligibility?

A: Yes. The tolerance must be exactly ±20%. Different tolerance ratings indicate different manufacturing specifications and are not acceptable for direct replacement.