UB2-5NE Equivalent & Substitute Parts

Part Overview

The UB2-5NE is a general purpose relay manufactured by KEMET, classified as a DPDT (Double Pole Double Throw, 2 Form C) surface mount component. This relay operates at 5VDC coil voltage with a 1A contact rating and is designed for non-latching switching applications. The part is currently active in production status with 961 pieces available in inventory.

Substitute parts are identified when alternative components maintain identical electrical and mechanical specifications, enabling direct replacement in circuit designs without modification to PCB layouts or control logic.

Substiute Parts

UB2-5NE

KEMETIn Stock: 978UB2-5NE Datasheet

Current PartRFQ

UB2-5NEN

KEMETIn Stock: 2187UB2-5NEN Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the UB2-5NE are identified based on strict equivalence across all critical electrical and mechanical parameters. The substitution logic is based on the following key parameters that must remain identical:

• Coil Voltage: 5VDC
• Contact Form: DPDT (2 Form C)
• Contact Rating (Current): 1 A
• Switching Voltage: 250VAC, 220VDC - Max
• Coil Current: 20 mA
• Coil Type: Non Latching
• Mounting Type: Surface Mount
• Termination Style: Gull Wing
• Operating Temperature Range: -40°C ~ 85°C
• Contact Material: Silver Alloy, Gold Alloy
• Coil Resistance: 250 Ohms
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Parts that maintain all these specifications are classified as parametric equivalents and are suitable for direct substitution in applications requiring the UB2-5NE.

Parameter Comparison

Engineering Selection Recommendations

The UB2-5NEN is a direct parametric equivalent to the UB2-5NE. Both components are manufactured by KEMET within the UB2 series and maintain identical electrical specifications, mechanical configuration, and compliance certifications.

Both parts are active in production status and carry ROHS3 compliance with REACH Unaffected designation. The UB2-5NEN currently maintains higher inventory availability at 2118 pieces compared to 961 pieces for the UB2-5NE.

Selection between these equivalent parts may be based on inventory availability and supply chain considerations, as all functional and compliance parameters are identical.

Frequently Asked Questions (FAQ)

Q: Can the UB2-5NEN replace the UB2-5NE in existing designs?

A: Yes. The UB2-5NEN is a parametric equivalent with identical coil voltage, contact form, current rating, switching voltage, timing characteristics, and operating temperature range. Direct substitution is supported without circuit modification.

Q: Are there differences in packaging between UB2-5NE and UB2-5NEN?

A: Both parts are supplied in tube packaging with identical surface mount gull wing termination style. No PCB layout modifications are required for substitution.

Q: Do both parts meet the same compliance standards?

A: Yes. Both UB2-5NE and UB2-5NEN are ROHS3 compliant and REACH unaffected, meeting identical regulatory requirements.

Q: What is the operating voltage range for these relays?

A: The coil operates at 5VDC nominal. The must operate voltage is 3.75 VDC and the must release voltage is 0.5 VDC. The contacts switch up to 250VAC or 220VDC maximum.

Q: Are the contact materials identical between substitute parts?

A: Yes. Both parts utilize Silver Alloy and Gold Alloy contact materials with identical 1A current rating and DPDT contact form.

Q: What is the coil resistance specification?

A: Both parts have a coil resistance of 250 Ohms with a coil current draw of 20 mA at 5VDC.