UA741CD Equivalent & Substitute Parts

Part Overview

The UA741CD is a general-purpose operational amplifier manufactured by Texas Instruments in 8-SOIC surface mount packaging. This device is classified as Last Time Buy, indicating discontinued production with limited remaining inventory. The UA741CD serves as a foundational linear amplifier component suitable for general-purpose signal conditioning, filtering, and amplification applications across industrial and commercial electronics.

Identification of equivalent and substitute parts is necessary due to the Last Time Buy status of the UA741CD. Alternative components with compatible electrical and mechanical specifications ensure design continuity and long-term supply chain reliability for applications utilizing this operational amplifier topology.

Key Parameters

Parameter	Value	Unit
Amplifier Type	General Purpose	—
Number of Circuits	1	—
Slew Rate	0.5	V/µs
Gain Bandwidth Product	1	MHz
Current - Input Bias	80	nA
Voltage - Input Offset	1	mV
Current - Supply	1.7	mA
Current - Output / Channel	25	mA
Voltage - Supply Span (Min)	7	V
Voltage - Supply Span (Max)	36	V
Operating Temperature	0 to 70	°C
Package / Case	8-SOIC (0.154", 3.90mm Width)	—
Mounting Type	Surface Mount	—
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution of the UA741CD is determined by compatibility across electrical performance parameters and mechanical packaging specifications. The primary substitution criteria are:

Electrical Compatibility Parameters:

Amplifier Type (General Purpose vs. J-FET topology)
Slew Rate (0.5 V/µs baseline)
Gain Bandwidth Product (1 MHz baseline)
Supply voltage range overlap (minimum 7 V to 36 V span)
Operating temperature range (minimum 0°C to 70°C coverage)

Mechanical Compatibility Parameters:

Package / Case: 8-SOIC (0.154", 3.90mm Width)
Mounting Type: Surface Mount
Supplier Device Package: 8-SOIC

Compliance Parameters:

RoHS3 Compliant
Moisture Sensitivity Level: 1 (Unlimited)

Substitute parts are grouped into two categories:

Category 1: Direct General-Purpose Substitutes — Parts maintaining identical amplifier type (General Purpose), slew rate (0.5 V/µs), and gain bandwidth product (1 MHz). These include UA741CDR, UA741CDT, UA741ID, and UA741IDT.

Category 2: Enhanced Performance Alternatives — Parts with improved electrical characteristics including MC33171DR2G (higher slew rate, lower input bias current, extended supply range) and J-FET variants (TL061ACDT, TL061CDT, TL061IDT) offering significantly lower input bias current and higher slew rate at the cost of different amplifier topology.

Parameter Comparison

Part Number	Manufacturer	Amplifier Type	Slew Rate (V/µs)	Gain Bandwidth (MHz)	Input Bias (nA)	Input Offset (mV)	Supply Current (mA)	Output Current (mA)	Supply Min (V)	Supply Max (V)	Temp Range (°C)	Product Status	Packaging
UA741CD	Texas Instruments	General Purpose	0.5	1	80	1	1.7	25	7	36	0 to 70	Last Time Buy	Tube
UA741CDR	Texas Instruments	General Purpose	0.5	1	80	1	1.7	25	7	36	0 to 70	Active	Cut Tape & Digi-Reel
UA741CDT	STMicroelectronics	General Purpose	0.5	1	10	1	1.7	25	10	44	0 to 70	Active	Cut Tape & Digi-Reel
UA741ID	STMicroelectronics	General Purpose	0.5	1	10	1	1.7	25	10	44	-40 to 105	Active	Tube
UA741IDT	STMicroelectronics	General Purpose	0.5	1	10	1	1.7	25	10	44	-40 to 105	Active	Cut Tape & Digi-Reel
MC33171DR2G	onsemi	General Purpose	2.1	1.8	20	2	0.22	27	3	44	-40 to 85	Active	Cut Tape & Digi-Reel
TL061ACDT	STMicroelectronics	J-FET	3.5	1	0.03	3	0.2	20	6	36	0 to 70	Active	Tape & Reel
TL061CDT	STMicroelectronics	J-FET	3.5	1	0.03	3	0.2	20	6	36	0 to 70	Active	Cut Tape & Digi-Reel
TL061IDT	STMicroelectronics	J-FET	3.5	1	0.03	3	0.2	20	6	36	-40 to 105	Active	Cut Tape & Digi-Reel

Engineering Selection Recommendations

For Direct Replacement (Identical Electrical Performance):

The UA741CDR is the primary recommended substitute for the UA741CD. Both components share identical electrical specifications including 0.5 V/µs slew rate, 1 MHz gain bandwidth product, 80 nA input bias current, and 7 V to 36 V supply range. The UA741CDR maintains Active product status with higher inventory availability (35,300 units) compared to the Last Time Buy UA741CD (38,276 units). The packaging difference (Cut Tape & Digi-Reel versus Tube) does not affect electrical compatibility and accommodates both manual and automated assembly processes.

For Extended Temperature Range Applications:

The UA741IDT and UA741ID provide identical electrical performance to the UA741CD with extended operating temperature range (-40°C to 105°C versus 0°C to 70°C). These STMicroelectronics variants feature improved input bias current specifications (10 nA versus 80 nA) and expanded supply voltage range (10 V to 44 V versus 7 V to 36 V). Both maintain Active product status. The UA741IDT (Cut Tape & Digi-Reel packaging) is preferred for high-volume automated assembly; UA741ID (Tube packaging) is suitable for manual assembly and lower-volume applications.

For Enhanced Performance Requirements:

The MC33171DR2G (onsemi) offers superior electrical performance with 2.1 V/µs slew rate, 1.8 MHz gain bandwidth product, and significantly reduced supply current (220 µA versus 1.7 mA). Input bias current is reduced to 20 nA. This component accommodates extended supply range (3 V to 44 V) and operating temperature (-40°C to 85°C). Selection of MC33171DR2G is appropriate when application requirements demand faster slew rate, lower power consumption, or wider supply voltage tolerance.

For High Input Impedance Applications:

The TL061CDT and TL061IDT (STMicroelectronics) employ J-FET input topology, delivering dramatically reduced input bias current (30 pA versus 80 nA). These components maintain 1 MHz gain bandwidth product and 0.154" 8-SOIC package compatibility. The TL061IDT provides extended temperature range (-40°C to 105°C) and Active product status with 2,439 units inventory. Selection of TL061 variants is appropriate for high-impedance signal sources where input bias current minimization is critical.

All recommended substitutes maintain ROHS3 compliance, Moisture Sensitivity Level 1 (Unlimited), and 8-SOIC surface mount packaging compatibility with the UA741CD.

Frequently Asked Questions (FAQ)

Q: Can UA741CDR directly replace UA741CD in existing designs?

A: Yes. The UA741CDR is electrically identical to the UA741CD across all specified parameters including slew rate, gain bandwidth product, input bias current, supply voltage range, and operating temperature. The packaging difference (Cut Tape & Digi-Reel versus Tube) does not affect circuit performance. Both components are RoHS3 compliant with MSL 1 rating.

Q: What is the primary difference between UA741CDT and UA741CD?

A: The UA741CDT (STMicroelectronics) maintains identical slew rate (0.5 V/µs) and gain bandwidth product (1 MHz) but features improved input bias current (10 nA versus 80 nA) and expanded supply voltage range (10 V to 44 V versus 7 V to 36 V). Both operate across 0°C to 70°C temperature range. The UA741CDT is manufactured by STMicroelectronics rather than Texas Instruments.

Q: When should MC33171DR2G be selected over UA741CD variants?

A: The MC33171DR2G is selected when application requirements include faster signal response (2.1 V/µs slew rate versus 0.5 V/µs), lower power consumption (220 µA supply current versus 1.7 mA), or extended supply voltage range (3 V to 44 V). The MC33171DR2G is suitable for battery-powered applications and designs requiring higher bandwidth (1.8 MHz versus 1 MHz).

Q: What is the advantage of TL061 J-FET variants over UA741 general-purpose types?

A: TL061 variants employ J-FET input topology, delivering input bias current of 30 pA compared to 80 nA (UA741CD) or 10 nA (UA741CDT). J-FET input architecture is advantageous for high-impedance signal sources, transimpedance amplifier configurations, and applications where input bias current must be minimized. TL061 variants maintain identical 1 MHz gain bandwidth product and 8-SOIC packaging.

Q: Are all substitute parts available in 8-SOIC surface mount packaging?

A: Yes. All substitute parts listed (UA741CDR, UA741CDT, UA741ID, UA741IDT, MC33171DR2G, TL061ACDT, TL061CDT, TL061IDT) are manufactured in 8-SOIC (0.154", 3.90mm Width) surface mount package. Packaging format variations (Tube, Cut Tape & Digi-Reel, Tape & Reel) affect handling and assembly processes but do not alter electrical compatibility or PCB footprint requirements.

Q: Which substitute part offers the widest operating temperature range?

A: The UA741IDT and TL061IDT both provide -40°C to 105°C operating temperature range, compared to 0°C to 70°C for the UA741CD. The UA741IDT maintains general-purpose amplifier topology with improved input bias current (10 nA). The TL061IDT provides J-FET input topology with ultra-low input bias current (30 pA). Selection depends on whether general-purpose or J-FET characteristics are required.

Q: Is the UA741CD still available for new designs?

A: The UA741CD is classified as Last Time Buy, indicating discontinued production with limited remaining inventory (38,276 units). New designs should utilize Active status alternatives such as UA741CDR, UA741CDT, UA741IDT, or MC33171DR2G to ensure long-term supply chain continuity and component availability.

Q: Do all substitute parts maintain RoHS3 compliance?

A: Yes. All substitute parts listed (UA741CDR, UA741CDT, UA741ID, UA741IDT, MC33171DR2G, TL061ACDT, TL061CDT, TL061IDT) are RoHS3 compliant with Moisture Sensitivity Level 1 (Unlimited). These components meet environmental and regulatory requirements equivalent to the UA741CD.

Q: What is the inventory status of substitute parts?

A: UA741CDR (35,300 units), UA741CDT (82,190 units), UA741IDT (9,200 units), MC33171DR2G (31,500 units), TL061CDT (2,800 units), and TL061IDT (2,439 units) are all in stock as new original components. The UA741CDT offers the highest inventory availability among direct general-purpose substitutes.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message