U86-D2427-10121 SFP+ Receptacle Connector - Equivalent & Substitute Parts

Part Overview

The U86-D2427-10121 is an 80-position SFP+ receptacle connector with cage, manufactured by Amphenol ICC (Commercial Products). The connector features a ganged (2x2) configuration with press-fit through-hole mounting and right-angle orientation. This part is classified as obsolete; equivalent substitute parts are available from active manufacturers to ensure design continuity and supply chain reliability.

Substiute Parts

U86-D2427-10121

Amphenol ICC (Commercial Products)In Stock: 1248U86-D2427-10121 Datasheet

Current PartRFQ

2007417-5

TE Connectivity AMP ConnectorsIn Stock: 12412007417-5 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution between the Amphenol ICC U86-D2427-10121 and the TE Connectivity AMP Connectors 2007417-5 is valid based on the following matched electrical and mechanical parameters:

• Connector Type: Both are SFP+ receptacles
• Position Count and Configuration: Both provide 80 positions (20 x 4) in a ganged (2x2) layout
• Connector Style: Both are receptacles with cage configuration
• Mounting: Both use through-hole, right-angle mounting
• Termination: Both use press-fit termination
• Contact Finish: Both use gold-plated contacts
• Regulatory Compliance: Both are RoHS-compliant and carry EAR99 ECCN classification
• Moisture Sensitivity: Both are rated MSL 1 (Unlimited)
• Tariff Classification: Both share HTSUS code 8536.69.4040

Parameter Comparison

Engineering Selection Recommendations

The TE Connectivity AMP Connectors 2007417-5 is an appropriate substitute for the obsolete Amphenol ICC U86-D2427-10121. Selection criteria are based on the following engineering factors:

Product Status: The primary driver for substitution is the obsolete status of the Amphenol part. The TE Connectivity equivalent maintains active product status with confirmed inventory availability (1230 Pcs New Original In Stock).

Regulatory Compliance: Both parts meet RoHS requirements. The TE Connectivity part carries ROHS3 compliance, representing current regulatory alignment. Both are classified under ECCN EAR99 and share identical HTSUS tariff codes, ensuring consistent export and trade compliance.

Functional Equivalence: The parts are mechanically and electrically equivalent across all critical parameters: SFP+ connector type, 80-position (20 x 4) ganged (2x2) configuration, through-hole right-angle mounting, and press-fit termination.

Additional Considerations: The TE Connectivity substitute includes EMI shielding in addition to the board guide and light pipe features present in the original part. Contact finish thickness is not specified for the substitute but both parts use gold plating and identical MSL ratings.

Frequently Asked Questions (FAQ)

Q: Can the 2007417-5 replace the U86-D2427-10121 directly? A: Yes. Both connectors are functionally equivalent based on connector type (SFP+), position count (80 in 20 x 4 configuration), mounting style (through-hole right-angle), and termination method (press-fit). The ganged (2x2) receptacle with cage configuration is identical.

Q: What are the main differences between these two parts? A: The primary difference is product status: the Amphenol part is obsolete while the TE Connectivity part is active. The TE Connectivity part includes EMI shielding as an additional feature. Contact finish thickness is specified for the Amphenol part (30.0µin) but not for the TE Connectivity part.

Q: Are there any compliance issues when substituting? A: No. Both parts are RoHS-compliant, carry EAR99 ECCN classification, and share identical HTSUS tariff codes (8536.69.4040). The TE Connectivity part has current ROHS3 compliance status.

Q: What does the ganged (2x2) configuration mean? A: This refers to two connectors physically ganged together in a 2x2 arrangement. The 80-position count is distributed as 20 positions per connector across 4 rows within each ganged pair.

Q: Are packaging formats compatible? A: The Amphenol part uses unspecified packaging (listed as "-"), while the TE Connectivity equivalent is supplied in Bulk packaging. Confirm packaging requirements with your procurement specifications.

Q: What is the moisture sensitivity level, and does it matter? A: Both parts carry MSL 1 (Unlimited), indicating no moisture sensitivity limitations. This means the connectors do not require special drying or shelf-life management during storage and handling.