U41P3H3CGE Toggle Switch 4PDT Equivalent & Substitute Parts

Part Overview

The U41P3H3CGE is a 4PDT (four-pole double-throw) toggle switch manufactured by C&K, designed for panel mount applications with a 5A AC/DC rating at 120V AC and 28V DC. This switch features a flat anti-rotation actuator, epoxy sealed terminals, and PC pin termination. The product is active and in stock with 1057 units available.

Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained within the allowed parameter tolerances for this switch category. Substitution becomes necessary when the primary part reaches end-of-life status, inventory constraints occur, or alternative sourcing is required for supply chain optimization.

Substiute Parts

U41P3H3CGE

C&KIn Stock: 1101U41P3H3CGE Datasheet

Current PartRFQ

MTA406NPC

TE Connectivity ALCOSWITCH SwitchesIn Stock: 1032MTA406NPC Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the U41P3H3CGE is determined by the following critical parameters:

• Circuit Configuration: Must be 4PDT to maintain electrical functionality
• Switch Function: Must be On-On to preserve operational behavior
• Mounting Type: Must be Panel Mount with compatible bushing thread (1/4-40)
• Termination Style: Must be PC Pin for PCB compatibility
• Current Rating: Substitute must meet or exceed 5A AC and 5A DC requirements
• Voltage Rating: Substitute must support minimum 120V AC and 28V DC
• Operating Temperature: Substitute must cover the -30°C to 85°C range or be suitable for the intended application environment
• Compliance: RoHS3 compliance required for regulatory alignment

The MTA406NPC from TE Connectivity ALCOSWITCH Switches meets these core substitution criteria with compatible electrical and mechanical specifications.

Parameter Comparison

Engineering Selection Recommendations

U41P3H3CGE (Primary Selection)

The U41P3H3CGE remains the primary choice for applications requiring the full specified performance envelope. This part is active, ROHS3 compliant, and REACH affected. It provides 5A DC current capacity and operates across the full -30°C to 85°C temperature range with 100,000 electrical life cycles.

MTA406NPC (Substitute Selection)

The MTA406NPC is suitable as a substitute when the following conditions are met:

• DC current requirements do not exceed 4A (the substitute is rated 4A DC versus the primary part's 5A DC)
• Operating temperature range does not require operation below -20°C or above 80°C
• AC current requirements are within 6A capacity (the substitute exceeds the primary 5A AC requirement)
• Mechanical panel cutout and actuator length differences are acceptable for the application
• Electrical life cycle requirements are compatible with the substitute's specifications

Both parts are ROHS3 compliant and REACH affected, ensuring regulatory alignment for equivalent applications.

Frequently Asked Questions (FAQ)

Q: Can the MTA406NPC directly replace the U41P3H3CGE in all applications?

A: The MTA406NPC is functionally compatible for most panel mount 4PDT On-On switch applications. However, the DC current rating is reduced from 5A to 4A, and the operating temperature range is narrower (-20°C to 80°C versus -30°C to 85°C). Verify that your application does not require the full DC current capacity or extended temperature operation before substitution.

Q: What are the critical parameters that must match for substitution?

A: The circuit configuration (4PDT), switch function (On-On), mounting type (Panel Mount), termination style (PC Pin), and bushing thread (1/4-40) must remain identical. Voltage and current ratings must meet or exceed application requirements. Both parts must maintain ROHS3 compliance.

Q: Are there mechanical compatibility concerns between these parts?

A: Both switches use 1/4-40 bushing threads and circular panel cutouts. The actuator length differs by 0.43mm (U41P3H3CGE at 10.92mm versus MTA406NPC at 10.49mm). Verify that panel clearance and actuator engagement are acceptable for your specific mechanical design.

Q: What is the packaging difference between these parts?

A: The U41P3H3CGE is supplied in Tray packaging, while the MTA406NPC is supplied in Bulk packaging. Confirm that bulk packaging meets your procurement and handling requirements.

Q: Are both parts compliant with current regulations?

A: Yes. Both the U41P3H3CGE and MTA406NPC are ROHS3 compliant and REACH affected, meeting current regulatory requirements for electronic components in most markets.