U13MPD9AGE Toggle Switch SPDT Equivalent & Substitute Parts

Part Overview

The U13MPD9AGE is an active production toggle switch manufactured by C&K, featuring SPDT (Single Pole Double Throw) circuit configuration with On-Off-On switching function. This through-hole, right-angle mounted component is rated for 5A at 120V AC and 28V DC, with epoxy sealed PC pin termination. The part is ROHS3 compliant and REACH affected. Finding equivalent or substitute parts may be necessary due to inventory constraints, lead time requirements, or specific application needs where alternative electrical or mechanical specifications are acceptable.

Substiute Parts

U13MPD9AGE

C&KIn Stock: 1015U13MPD9AGE Datasheet

Current PartRFQ

100SP3T2B4M6RE

E-SwitchIn Stock: 8887100SP3T2B4M6RE Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the U13MPD9AGE is determined by the following critical parameters:

Circuit Configuration: Both the main part and substitute must maintain SPDT topology to preserve switching functionality.

Switch Function: On-Off-On operation must be preserved to ensure compatible control behavior.

Mounting Type: Through-hole, right-angle orientation is required for PCB layout compatibility.

Termination Style: PC pin termination ensures compatibility with standard through-hole assembly processes.

Operating Temperature Range: The substitute must support the -30°C to 85°C operating window.

Electrical Life: Minimum 40,000 cycles is required for equivalent reliability.

Compliance: ROHS3 compliance and MSL 1 rating are mandatory for regulatory and handling requirements.

The substitute part 100SP3T2B4M6RE from E-Switch maintains identical circuit configuration, switch function, mounting type, termination style, operating temperature range, electrical life, and compliance status. However, the substitute exhibits reduced current and voltage ratings (0.4VA at 20V AC/DC versus 5A at 120V AC/28V DC), which restricts its application scope to lower-power circuits.

Parameter Comparison

Engineering Selection Recommendations

U13MPD9AGE (C&K): Select this part for applications requiring 5A current handling at 120V AC or 28V DC. The anti-rotation actuator provides mechanical stability in high-vibration environments. Active product status ensures continued availability and supply chain stability. ROHS3 compliance and REACH affected status meet regulatory requirements for controlled substance management.

100SP3T2B4M6RE (E-Switch): This substitute is suitable only for low-power applications operating at 20V AC/DC with maximum 0.4VA load. The standard round actuator and shorter 5.08mm length may require mechanical redesign of the control interface. ROHS3 compliance is maintained. REACH unaffected status indicates fewer regulatory restrictions on material composition. This part is appropriate only when circuit power requirements are substantially lower than the original specification.

Frequently Asked Questions (FAQ)

Q: Can the 100SP3T2B4M6RE directly replace the U13MPD9AGE in existing designs?

A: Direct replacement is not recommended without circuit redesign. The substitute part has significantly lower current (0.4VA versus 5A) and voltage (20V versus 120V AC/28V DC) ratings. Mechanical differences in actuator type and length may also require panel modifications.

Q: What are the critical compatibility factors for SPDT toggle switch substitution?

A: Circuit configuration (SPDT), switch function (On-Off-On), mounting type (through-hole right-angle), and termination style (PC pin) must remain identical. Operating temperature range, electrical life rating, and compliance certifications must meet or exceed the original specification.

Q: Are there packaging differences between these parts?

A: Yes. The U13MPD9AGE is supplied in trays, while the 100SP3T2B4M6RE is supplied in bulk packaging. This affects inventory management and assembly line handling procedures.

Q: How do actuator differences affect mechanical compatibility?

A: The U13MPD9AGE features an anti-rotation actuator at 6.86mm length, while the substitute has a standard round actuator at 5.08mm length. These differences may require redesign of the control panel cutout and actuator engagement mechanism.

Q: What compliance considerations apply to substitution?

A: Both parts are ROHS3 compliant and have MSL 1 (unlimited) moisture sensitivity ratings. The U13MPD9AGE is REACH affected, while the substitute is REACH unaffected. Verify that your application's regulatory requirements align with the substitute's compliance profile.