U11MPD9AGE Toggle Switch SPDT Equivalent & Substitute Parts

Part Overview

The U11MPD9AGE is an active-status toggle switch manufactured by C&K, featuring SPDT (Single Pole Double Throw) circuitry with On-On switching function. This through-hole, right-angle mounted component is rated for 5A at 120V AC and 28V DC, with epoxy sealed terminals and an operating temperature range of -30°C to 85°C. Finding equivalent substitute parts may be necessary due to inventory constraints, lead time requirements, or specific application needs while maintaining functional compatibility.

Substiute Parts

U11MPD9AGE

C&KIn Stock: 970U11MPD9AGE Datasheet

Current PartRFQ

100SP1T2B4M6RE

E-SwitchIn Stock: 3489100SP1T2B4M6RE Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the U11MPD9AGE is determined by the following critical parameters:

• Circuit Configuration: Must be SPDT to maintain functional equivalence
• Switch Function: Must be On-On to preserve operational behavior
• Mounting Type: Must be Through Hole, Right Angle for PCB compatibility
• Termination Style: Must be PC Pin for direct connection compatibility
• Electrical Ratings: Substitute must meet or exceed the voltage and current requirements of the application
• Operating Temperature Range: Must encompass or match the -30°C to 85°C specification
• RoHS Compliance: Must maintain ROHS3 Compliant status for regulatory alignment

The identified substitute part 100SP1T2B4M6RE from E-Switch shares the core circuit topology (SPDT), switch function (On-On), mounting configuration (Through Hole, Right Angle), and termination style (PC Pin). However, electrical rating differences exist and must be evaluated against specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

The 100SP1T2B4M6RE from E-Switch maintains functional compatibility with the U11MPD9AGE in applications requiring SPDT On-On switching with Through Hole, Right Angle mounting and PC Pin termination. Both components are Active-status products with ROHS3 compliance and identical operating temperature ranges.

Selection of the E-Switch substitute requires verification that application voltage and current demands do not exceed 20V AC/DC and 0.4VA ratings. The substitute component features reduced electrical life (40,000 cycles versus 100,000 cycles) and a shorter actuator length (5.08mm versus 6.86mm), which may impact mechanical fit and operational longevity in high-cycle applications.

Frequently Asked Questions (FAQ)

Q: Can the 100SP1T2B4M6RE directly replace the U11MPD9AGE in all applications?

A: Direct replacement is limited to applications operating at or below 20V AC/DC and 0.4VA. Applications requiring the full 5A or 120V AC rating of the U11MPD9AGE cannot use the E-Switch substitute without circuit redesign.

Q: What is the impact of the different actuator lengths?

A: The U11MPD9AGE features a 6.86mm actuator length with anti-rotation design, while the 100SP1T2B4M6RE has a 5.08mm standard round actuator. Panel cutout dimensions and mechanical clearances must be verified for the substitute to ensure proper fit and operation.

Q: Are there compliance differences between these parts?

A: Both components are ROHS3 Compliant with identical operating temperature ranges (-30°C to 85°C). The U11MPD9AGE is REACH Affected, while the 100SP1T2B4M6RE is REACH Unaffected. Application regulatory requirements must be evaluated accordingly.

Q: How do electrical life ratings affect component selection?

A: The U11MPD9AGE is rated for 100,000 electrical cycles, while the 100SP1T2B4M6RE is rated for 40,000 cycles. Applications with high switching frequency or extended operational life requirements should prioritize the higher-rated component.

Q: What packaging differences exist between these parts?

A: The U11MPD9AGE is supplied in Tray packaging, while the 100SP1T2B4M6RE is supplied in Bulk packaging. Procurement and handling procedures may differ accordingly.