TVP7000PZP Video Digitizer IC Equivalent & Substitute Parts

Part Overview

The TVP7000PZP is a video digitizer IC manufactured by Texas Instruments, designed for consumer video applications. It features I2C and Serial control interfaces and operates across dual voltage supply ranges (1.7V–1.9V and 3.0V–3.6V). The device is packaged in a 100-HTQFP (14x14) surface mount configuration with exposed pad.

The TVP7000PZP is classified as obsolete. Locating equivalent or substitute components is necessary for ongoing system support, maintenance, and new design implementations where this legacy device is specified.

Substiute Parts

TVP7000PZP

Texas InstrumentsIn Stock: 1673TVP7000PZP Datasheet

Current PartRFQ

TVP7002PZP

Texas InstrumentsIn Stock: 1399TVP7002PZP Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TVP7000PZP is determined by the following critical parameters:

• Package Compatibility: Identical 100-TQFP Exposed Pad / 100-HTQFP (14x14) surface mount configuration
• Functional Category: Video digitizer IC with digitizer function
• Control Interface: I2C interface support (primary control method)
• Voltage Supply Ranges: Overlap or compatibility within specified operating ranges
• Mounting Type: Surface mount only
• Compliance: ROHS3 compliance and REACH unaffected status

The TVP7002PZP meets all substitution criteria as a Texas Instruments video digitizer IC in the identical package with compatible control interfaces and voltage specifications.

Parameter Comparison

Engineering Selection Recommendations

The TVP7002PZP is the manufacturer-recommended substitute for the obsolete TVP7000PZP. Both devices maintain identical package geometry, mounting type, and functional classification as video digitizer ICs.

The TVP7002PZP carries active product status, ensuring ongoing availability and manufacturer support. Both parts maintain ROHS3 compliance and REACH unaffected status, satisfying regulatory requirements for new designs and legacy system replacements.

The voltage supply range for TVP7002PZP (1.8V–2.0V, 3.0V–3.6V) overlaps substantially with the TVP7000PZP specification (1.7V–1.9V, 3.0V–3.6V) in the 3.0V–3.6V range. The lower voltage range exhibits a 0.1V offset in the minimum specification. Designs operating exclusively in the 3.0V–3.6V range experience no voltage compatibility constraints.

The TVP7002PZP control interface supports I2C, matching the primary control method of the TVP7000PZP. The TVP7000PZP additionally supports Serial interface; designs utilizing Serial control require verification of TVP7002PZP serial protocol compatibility or alternative component selection.

Frequently Asked Questions (FAQ)

Q: Can TVP7002PZP directly replace TVP7000PZP in all applications?

A: Direct replacement is valid for designs operating in the 3.0V–3.6V supply range and utilizing I2C control interface. Designs requiring Serial interface operation or operating in the 1.7V–1.9V range require additional verification against TVP7002PZP specifications.

Q: Are the packages physically identical?

A: Yes. Both devices use 100-TQFP Exposed Pad packaging in 100-HTQFP (14x14) configuration. PCB footprints and mounting procedures are identical.

Q: What is the difference in product status between these parts?

A: TVP7000PZP is obsolete and no longer manufactured. TVP7002PZP is active and available from Texas Instruments, ensuring long-term supply continuity and manufacturer technical support.

Q: Do both parts meet the same compliance standards?

A: Yes. Both TVP7000PZP and TVP7002PZP are ROHS3 compliant and REACH unaffected, satisfying equivalent regulatory requirements.

Q: What is the moisture sensitivity level for these components?

A: Both devices carry MSL 3 rating with 168-hour floor life. Identical moisture handling and storage procedures apply to both parts.