TTC009,F(M Equivalent & Substitute Parts

Part Overview

The TTC009,F(M is a Bipolar (BJT) Transistor manufactured by Toshiba Semiconductor and Storage, classified as an NPN type with a maximum collector current of 3 A and collector-emitter breakdown voltage of 80 V. This component is rated for 2 W maximum power dissipation and operates at a transition frequency of 150 MHz. The device is packaged in a Through Hole TO-220-3 configuration.

The TTC009,F(M is currently listed as Obsolete. Identification of equivalent and substitute parts is necessary to support ongoing maintenance, repair, and redesign activities for legacy systems and applications utilizing this component.

Key Parameters

Parameter	Value
Transistor Type	NPN
Current - Collector (Ic) (Max)	3 A
Voltage - Collector Emitter Breakdown (Max)	80 V
Vce Saturation (Max) @ Ib, Ic	500mV @ 100mA, 1A
Current - Collector Cutoff (Max)	100nA (ICBO)
DC Current Gain (hFE) (Min) @ Ic, Vce	100 @ 500mA, 5V
Power - Max	2 W
Frequency - Transition	150 MHz
Operating Temperature (TJ)	150°C
Mounting Type	Through Hole
Package / Case	TO-220-3

Substitute Part Grouping Explanation

Substitution of the TTC009,F(M is determined by electrical parameter compatibility and physical form factor considerations. The primary electrical parameters that define substitution eligibility are:

Transistor Type: NPN configuration
Maximum Collector Current: 3 A or greater
Collector-Emitter Breakdown Voltage: 80 V or greater
Transition Frequency: 150 MHz or greater
Maximum Power Dissipation: 2 W or greater
Operating Temperature Range: 150°C or greater

The 2SC6076(TE16L1,NV) meets all electrical parameter requirements for substitution. This part maintains identical maximum collector current (3 A), collector-emitter breakdown voltage (80 V), and transition frequency (150 MHz) specifications. The 2SC6076 provides enhanced power dissipation capability (10 W versus 2 W) and improved DC current gain characteristics. However, the 2SC6076 utilizes Surface Mount packaging (PW-MOLD / TO-252-3) rather than Through Hole packaging, requiring circuit board redesign for direct substitution.

Parameter Comparison

Parameter	TTC009,F(M	2SC6076(TE16L1,NV)
Transistor Type	NPN	NPN
Current - Collector (Ic) (Max)	3 A	3 A
Voltage - Collector Emitter Breakdown (Max)	80 V	80 V
Vce Saturation (Max) @ Ib, Ic	500mV @ 100mA, 1A	500mV @ 100mA, 1A
DC Current Gain (hFE) (Min) @ Ic, Vce	100 @ 500mA, 5V	180 @ 500mA, 2V
Power - Max	2 W	10 W
Frequency - Transition	150 MHz	150 MHz
Operating Temperature (TJ)	150°C	150°C
Mounting Type	Through Hole	Surface Mount
Package / Case	TO-220-3	TO-252-3, DPAK
Product Status	Obsolete	Active
RoHS Status	Not specified	RoHS Compliant

Engineering Selection Recommendations

The 2SC6076(TE16L1,NV) is electrically compatible with the TTC009,F(M across all critical performance parameters. The substitute part maintains identical maximum collector current, collector-emitter breakdown voltage, saturation voltage, and transition frequency specifications. The 2SC6076 demonstrates superior DC current gain performance and increased power dissipation capability, providing design margin for thermal management.

The 2SC6076(TE16L1,NV) is currently in Active product status with RoHS Compliance certification, ensuring long-term availability and regulatory alignment. The TTC009,F(M is Obsolete, making the 2SC6076 the appropriate selection for new designs and ongoing production support.

Substitution requires consideration of packaging differences. The TTC009,F(M utilizes Through Hole TO-220-3 mounting, while the 2SC6076 employs Surface Mount PW-MOLD (TO-252-3, DPAK) packaging. Direct pin-compatible substitution on existing Through Hole circuit boards is not possible without board redesign or adapter solutions.

Frequently Asked Questions (FAQ)

Q: Can the 2SC6076(TE16L1,NV) directly replace the TTC009,F(M in existing circuit boards?

A: Electrical substitution is valid. However, physical substitution requires circuit board modification due to packaging differences. The TTC009,F(M is Through Hole TO-220-3, while the 2SC6076 is Surface Mount TO-252-3 (DPAK). Pin-to-pin electrical compatibility exists, but mounting configuration differs.

Q: What are the critical electrical parameters for substitution?

A: The following parameters must be equal to or exceed the TTC009,F(M specifications: Maximum Collector Current (3 A), Collector-Emitter Breakdown Voltage (80 V), Transition Frequency (150 MHz), and Operating Temperature (150°C). The 2SC6076 meets all these requirements.

Q: Does the 2SC6076 provide any performance advantages over the TTC009,F(M?

A: The 2SC6076 provides increased maximum power dissipation (10 W versus 2 W) and higher DC current gain (180 @ 500mA, 2V versus 100 @ 500mA, 5V). These characteristics provide enhanced thermal capability and improved amplification performance.

Q: Is the 2SC6076(TE16L1,NV) suitable for new product designs?

A: Yes. The 2SC6076 is in Active product status with RoHS Compliance certification, making it appropriate for new designs requiring long-term component availability and regulatory compliance.

Q: What is the significance of the Obsolete status of the TTC009,F(M?

A: Obsolete status indicates the manufacturer has discontinued production. The 2SC6076 is the recommended alternative for applications requiring equivalent electrical performance, as it maintains active production status and ensures ongoing supply chain availability.

Q: Are there packaging options available for the 2SC6076?

A: The 2SC6076(TE16L1,NV) is supplied in Tape & Reel (TR) packaging format. The supplier device package designation is PW-MOLD with case code TO-252-3, DPAK (2 Leads + Tab), SC-63.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message