TSW-136-07-T-D Equivalent & Substitute Parts

Part Overview

The TSW-136-07-T-D is a rectangular connector header manufactured by Samtec Inc., designed for through-hole board-to-board or cable applications. This 72-position vertical header operates across an extended temperature range of -55°C to 105°C and is classified as an active product. Alternative components may be required due to inventory constraints, application-specific performance requirements, or supply chain considerations.

Substiute Parts

TSW-136-07-T-D

Samtec Inc.In Stock: 994TSW-136-07-T-D Datasheet

Current PartRFQ

929836-01-36-RK

3MIn Stock: 1248929836-01-36-RK Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TSW-136-07-T-D is determined by strict alignment of the following critical parameters:

• Connector type (Header)
• Contact type (Male Pin)
• Number of positions (72)
• Number of rows (2)
• Pitch - mating (0.100" / 2.54mm)
• Row spacing - mating (0.100" / 2.54mm)
• Mounting type (Through Hole)
• Termination method (Solder)
• Shrouding configuration (Unshrouded)
• Contact shape (Square)
• Material flammability rating (UL94 V-0)

The 3M 929836-01-36-RK meets all critical substitution criteria and is classified as a manufacturer-recommended equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both the TSW-136-07-T-D and 929836-01-36-RK are active products with UL94 V-0 material flammability ratings and unlimited moisture sensitivity levels. The TSW-136-07-T-D supports an extended lower temperature limit of -55°C compared to the 3M substitute at -40°C. Applications requiring operation below -40°C must retain the Samtec component. For applications within the -40°C to 105°C range, the 3M 929836-01-36-RK provides functional equivalence with full RoHS compliance and active product status.

Frequently Asked Questions (FAQ)

Q: Can the 929836-01-36-RK replace the TSW-136-07-T-D in all applications?

A: The 929836-01-36-RK is functionally equivalent for applications operating within -40°C to 105°C. Applications requiring operation below -40°C must use the TSW-136-07-T-D, which supports -55°C to 105°C.

Q: What are the key differences between these connectors?

A: The primary differences are contact material (Phosphor Bronze vs. Copper Alloy), insulation material (PBT vs. PCT), and minimum operating temperature (-55°C vs. -40°C). Both maintain identical pitch, position count, row configuration, and flammability ratings.

Q: Are both parts RoHS compliant?

A: Yes. The TSW-136-07-T-D is ROHS3 Compliant, and the 929836-01-36-RK is RoHS Compliant. Both meet regulatory requirements for restricted substance elimination.

Q: Do these connectors have the same physical footprint?

A: Both connectors share identical mating pitch (0.100"), row spacing (0.100"), and position configuration (72 positions, 2 rows). Minor variations exist in overall contact length and insulation height, which do not affect PCB footprint compatibility.

Q: What is the current rating for these connectors?

A: The 929836-01-36-RK is rated for 2.5A per contact. The TSW-136-07-T-D current rating is not specified in the provided data.