TSW-130-15-S-D Equivalent & Substitute Parts

Part Overview

The TSW-130-15-S-D is an active rectangular connector header manufactured by Samtec Inc., designed for through-hole board-to-board or cable applications. This 60-position, 2-row connector operates across -55°C to 125°C and meets UL94 V-0 flammability standards with ROHS3 compliance. Substitute parts are identified when equivalent electrical and mechanical parameters align with the main part's specifications, enabling direct replacement in applications where the primary part is unavailable or inventory constraints exist.

Key Parameters

Parameter	Value
Manufacturer Part Number	TSW-130-15-S-D
Manufacturer	Samtec Inc.
Category	Rectangular Connectors
Connector Type	Header
Contact Type	Male Pin
Number of Positions	60
Number of Rows	2
Pitch - Mating	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole
Termination	Solder
Operating Temperature	-55°C ~ 125°C
Material Flammability Rating	UL94 V-0
RoHS Status	ROHS3 Compliant
Product Status	Active

Substitute Part Grouping Explanation

Substitution eligibility is determined by alignment across the following critical parameters:

Connector positioning: 60 positions, 2 rows, 0.100" (2.54mm) pitch and row spacing
Contact configuration: Male pin, square or circular contact shape
Mounting and termination: Through-hole solder termination
Environmental compliance: UL94 V-0 flammability rating, RoHS compliance
Operating range: Temperature tolerance of -55°C to 125°C or equivalent

The identified substitutes meet these core criteria, enabling functional equivalence in board-to-board or cable connector applications.

Parameter Comparison

Parameter	TSW-130-15-S-D	TSW-130-14-S-D	3-87215-0
Manufacturer	Samtec Inc.	Samtec Inc.	TE Connectivity AMP Connectors
Series	TSW	TSW	AMPMODU Mod II
Number of Positions	60	60	60
Number of Rows	2	2	2
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Contact Type	Male Pin	Male Pin	Male Pin
Contact Shape	Square	Square	Circular
Mounting Type	Through Hole	Through Hole	Through Hole
Termination	Solder	Solder	Solder
Contact Length - Mating	0.520" (13.21mm)	0.320" (8.13mm)	0.318" (8.08mm)
Contact Length - Post	0.110" (2.79mm)	0.110" (2.79mm)	0.125" (3.18mm)
Overall Contact Length	0.730" (18.54mm)	0.530" (13.46mm)	0.533" (14.65mm)
Insulation Height	0.100" (2.54mm)	0.100" (2.54mm)	0.090" (2.29mm)
Contact Finish - Mating	Gold	Gold	Gold
Contact Finish - Post	Tin	Tin	Gold
Contact Material	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze
Insulation Material	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)	Thermoplastic
Operating Temperature	-55°C ~ 125°C	-55°C ~ 125°C	-65°C ~ 105°C
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	RoHS Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Product Status	Active	Active	Active

Engineering Selection Recommendations

TSW-130-14-S-D (Samtec Inc.) is the primary substitute for TSW-130-15-S-D. Both parts share identical pitch, row configuration, contact material, and operating temperature range. The difference in contact length (0.320" vs. 0.520" mating length) reflects application-specific design variations within the same series. Both maintain ROHS3 compliance and UL94 V-0 flammability certification, ensuring regulatory equivalence.

3-87215-0 (TE Connectivity AMP Connectors) provides cross-manufacturer substitution. This part maintains the same 60-position, 2-row configuration with 0.100" (2.54mm) pitch and row spacing. The circular contact shape differs from the square contacts of the Samtec parts, and the operating temperature range is -65°C to 105°C, which does not fully encompass the -55°C to 125°C range of the main part. The insulation height is 0.090" (2.29mm) versus 0.100" (2.54mm) for the main part. These dimensional and thermal differences require verification against specific application requirements before selection.

All three parts are active products with current inventory availability and meet baseline compliance requirements.

Frequently Asked Questions (FAQ)

Q: Can TSW-130-14-S-D directly replace TSW-130-15-S-D?

A: TSW-130-14-S-D is a direct substitute within the same Samtec TSW series. Both parts share identical pitch (0.100" / 2.54mm), row configuration (2 rows, 60 positions), contact material (phosphor bronze), and operating temperature range (-55°C to 125°C). The primary difference is mating contact length (0.320" vs. 0.520"), which reflects different application profiles. Verify that your PCB stack-up and mating connector accommodate the shorter contact length of the TSW-130-14-S-D.

Q: Is 3-87215-0 compatible with applications designed for TSW-130-15-S-D?

A: 3-87215-0 maintains the same 60-position, 2-row, 0.100" (2.54mm) pitch configuration, enabling mechanical compatibility. However, three factors require evaluation: (1) circular contact shape versus square contacts may affect insertion force and retention characteristics, (2) operating temperature range (-65°C to 105°C) does not extend to 125°C, and (3) insulation height is 0.090" (2.29mm) versus 0.100" (2.54mm). Confirm that your application does not require the full -55°C to 125°C range and that the dimensional differences do not conflict with your PCB layout or mating connector specifications.

Q: What are the key parameters that determine substitution eligibility?

A: Substitution is based on alignment across connector positioning (60 positions, 2 rows, 0.100" pitch and row spacing), contact configuration (male pin type), mounting method (through-hole solder termination), environmental compliance (UL94 V-0, RoHS), and operating temperature capability. Differences in contact length, contact shape, insulation height, and post finish may affect mechanical fit and electrical performance in specific applications.

Q: Are all three parts RoHS compliant?

A: Yes. TSW-130-15-S-D and TSW-130-14-S-D are ROHS3 compliant. 3-87215-0 is RoHS compliant. All three parts meet regulatory requirements for lead-free construction.

Q: What is the moisture sensitivity level for these connectors?

A: All three parts carry MSL 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message