TSW-114-07-G-S-LL Equivalent & Substitute Parts

Part Overview

The TSW-114-07-G-S-LL is a rectangular connector header manufactured by Samtec Inc., designed for through-hole mounting applications. This 14-position, single-row connector operates at 0.100" (2.54mm) pitch and features gold-plated mating contacts with kinked pin solder termination. The part maintains Active product status and is ROHS3 compliant with UL94 V-0 flammability rating. Substitute parts are identified when equivalent electrical and mechanical parameters align with the core connector specifications, enabling direct functional replacement in board-level applications.

Substiute Parts

TSW-114-07-G-S-LL

Samtec Inc.In Stock: 991TSW-114-07-G-S-LL Datasheet

Current PartRFQ

TSW-114-07-L-S

Samtec Inc.In Stock: 1476TSW-114-07-L-S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TSW-114-07-G-S-LL is determined by strict alignment of the following parameters:

• Manufacturer: Samtec Inc.
• Series: TSW
• Number of Positions: 14
• Number of Rows: 1
• Pitch - Mating: 0.100" (2.54mm)
• Connector Type: Header
• Contact Type: Male Pin
• Mounting Type: Through Hole
• Contact Shape: Square
• Contact Material: Phosphor Bronze
• Insulation Material: Polybutylene Terephthalate (PBT)
• Operating Temperature Range: -55°C ~ 125°C
• Material Flammability Rating: UL94 V-0
• RoHS Status: ROHS3 Compliant

The TSW-114-07-L-S meets all core substitution criteria. Variations in termination type (kinked pin solder versus standard solder) and contact finish on the post (gold versus tin) do not affect functional compatibility in board-level applications where these connectors serve equivalent roles.

Parameter Comparison

Engineering Selection Recommendations

Both the TSW-114-07-G-S-LL and TSW-114-07-L-S maintain Active product status and satisfy ROHS3 compliance and UL94 V-0 flammability requirements. The TSW-114-07-L-S is a direct functional equivalent based on matching electrical and mechanical parameters across all critical connector specifications. Selection between these parts should be based on specific application requirements regarding termination style and post contact finish, with both options providing equivalent performance in standard through-hole board-level applications.

Frequently Asked Questions (FAQ)

Q: Can TSW-114-07-L-S replace TSW-114-07-G-S-LL in existing designs?

A: Yes. Both connectors share identical pitch (0.100"), position count (14), row configuration (1), contact geometry, and material specifications. The primary differences are termination style and post contact finish, which do not affect mating interface compatibility.

Q: What is the difference between kinked pin and standard solder termination?

A: Kinked pin termination (TSW-114-07-G-S-LL) provides enhanced mechanical retention during PCB assembly. Standard solder termination (TSW-114-07-L-S) uses straight pins. Both achieve equivalent electrical connection through solder joints.

Q: Does the post contact finish difference affect performance?

A: The TSW-114-07-G-S-LL features gold-plated posts while TSW-114-07-L-S features tin-plated posts. Both finishes provide adequate solder wettability and electrical conductivity for through-hole applications. Selection depends on specific soldering process requirements and design specifications.

Q: Are both parts available in the same packaging?

A: Both TSW-114-07-G-S-LL and TSW-114-07-L-S are supplied in Bulk packaging by Samtec Inc.

Q: Do both parts meet the same compliance standards?

A: Yes. Both parts are ROHS3 compliant, UL94 V-0 rated, and carry Moisture Sensitivity Level 1 (Unlimited). Both operate across the -55°C to 125°C temperature range.