TSW-110-13-G-D-LC Equivalent & Substitute Parts

Part Overview

The TSW-110-13-G-D-LC is a rectangular connector header manufactured by Samtec Inc., designed for through-hole board-to-board or cable applications. This vertical connector features 20 positions arranged in 2 rows with 0.100" (2.54mm) pitch spacing. The part is currently active in production with 1099 units in stock. Alternative part numbers within the TSW series may be required due to inventory constraints, application-specific requirements, or supply chain considerations.

Substiute Parts

TSW-110-13-G-D-LC

Samtec Inc.In Stock: 1142TSW-110-13-G-D-LC Datasheet

Current PartRFQ

TSW-110-13-G-D

Samtec Inc.In Stock: 992TSW-110-13-G-D Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TSW-110-13-G-D-LC is determined by strict equivalence across the following critical parameters:

• Connector Type & Contact Configuration: Header with male pins
• Position Count & Row Configuration: 20 positions in 2 rows
• Pitch Specifications: 0.100" (2.54mm) mating pitch and row spacing
• Mounting & Termination: Through-hole solder termination
• Contact Material & Finish: Phosphor bronze with gold plating on mating surfaces
• Insulation System: PBT material with UL94 V-0 rating
• Operating Temperature Range: -55°C ~ 125°C
• Compliance Standards: ROHS3 compliant, MSL 1

The substitute part TSW-110-13-G-D meets all these criteria and is therefore electrically and mechanically equivalent for direct substitution.

Parameter Comparison

Engineering Selection Recommendations

Both the TSW-110-13-G-D-LC and TSW-110-13-G-D are active production parts from Samtec Inc. with identical electrical and mechanical specifications. Selection between these parts should be based on inventory availability and supply chain requirements. Both parts maintain ROHS3 compliance and UL94 V-0 flammability certification, ensuring regulatory conformance for industrial and commercial applications. The TSW-110-13-G-D-LC currently has higher inventory availability at 1099 units compared to 970 units for the TSW-110-13-G-D.

Frequently Asked Questions (FAQ)

Q: Are TSW-110-13-G-D-LC and TSW-110-13-G-D electrically interchangeable?

A: Yes. Both parts share identical electrical specifications including contact material, finish, pitch, and operating temperature range. They are direct electrical equivalents.

Q: Are these parts mechanically interchangeable?

A: Yes. Both parts have identical mechanical dimensions, mounting type, contact geometry, and insulation specifications. They are direct mechanical equivalents.

Q: What is the difference between TSW-110-13-G-D-LC and TSW-110-13-G-D?

A: The parts are functionally equivalent. The difference lies in the part number suffix, which may indicate packaging or distribution channel variations. All critical specifications remain identical.

Q: Can I use TSW-110-13-G-D as a replacement for TSW-110-13-G-D-LC in existing designs?

A: Yes. The substitute part meets all electrical, mechanical, and compliance requirements of the original part. No design modifications are required.

Q: Are both parts RoHS compliant?

A: Yes. Both TSW-110-13-G-D-LC and TSW-110-13-G-D are ROHS3 compliant and suitable for applications requiring RoHS certification.

Q: What is the operating temperature range for these connectors?

A: Both parts operate across -55°C to 125°C, suitable for industrial and commercial temperature environments.

Q: Are these parts moisture sensitive?

A: Both parts have Moisture Sensitivity Level (MSL) 1, indicating unlimited shelf life without moisture control requirements.