TSW-107-25-G-D-RA-009 Equivalent & Substitute Parts

Part Overview

The TSW-107-25-G-D-RA-009 is an active rectangular connector header manufactured by Samtec Inc. This through-hole, right-angle connector features 14 positions across 2 rows with 0.100" (2.54mm) pitch spacing. The connector is designed for board-to-board or cable applications with solder termination and push-pull fastening. Finding equivalent or substitute parts may be necessary due to inventory constraints, lead time requirements, or design flexibility within compatible electrical and mechanical specifications.

Substiute Parts

TSW-107-25-G-D-RA-009

Samtec Inc.In Stock: 1122TSW-107-25-G-D-RA-009 Datasheet

Current PartRFQ

TSW-107-25-G-D-RA-006

Samtec Inc.In Stock: 1025TSW-107-25-G-D-RA-006 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TSW-107-25-G-D-RA-009 is determined by strict equivalence across the following critical parameters:

• Connector type (Header)
• Contact type (Male Pin)
• Number of positions (14) and row configuration (2 rows)
• Pitch spacing (0.100" / 2.54mm for both mating and row spacing)
• Mounting style (Through Hole, Right Angle)
• Termination method (Solder)
• Contact finish (Gold)
• Operating temperature range (-55°C ~ 125°C)
• Compliance certifications (ROHS3, UL94 V-0)

The identified substitute part TSW-107-25-G-D-RA-006 maintains identical specifications across all these parameters, confirming direct substitutability within the TSW series.

Parameter Comparison

Engineering Selection Recommendations

Both the TSW-107-25-G-D-RA-009 and TSW-107-25-G-D-RA-006 are active products from Samtec Inc. with identical electrical and mechanical specifications. Selection between these parts may be based on inventory availability. The TSW-107-25-G-D-RA-009 currently has 1046 units in stock, while the TSW-107-25-G-D-RA-006 has 936 units available. Both parts maintain ROHS3 compliance and UL94 V-0 flammability certification, meeting regulatory requirements for industrial and commercial applications. The identical contact geometry, pitch spacing, and termination specifications ensure direct interchangeability in PCB designs.

Frequently Asked Questions (FAQ)

Q: Can TSW-107-25-G-D-RA-006 be used as a direct replacement for TSW-107-25-G-D-RA-009?

A: Yes. Both parts are identical across all electrical and mechanical parameters, including connector type, position count, pitch spacing, mounting style, contact finish, and operating temperature range. No design modifications are required.

Q: What are the key parameters that determine substitutability for this connector?

A: The critical parameters are: 14-position configuration in 2 rows, 0.100" (2.54mm) pitch spacing, through-hole right-angle mounting, solder termination, male pin contact type, and gold contact finish. Any deviation in these parameters would disqualify a part as a direct substitute.

Q: Are there any compliance differences between these parts?

A: No. Both parts carry identical ROHS3 compliance status and UL94 V-0 flammability rating. Moisture sensitivity level is 1 (Unlimited) for both parts.

Q: What is the difference between TSW-107-25-G-D-RA-009 and TSW-107-25-G-D-RA-006?

A: Based on provided specifications, these parts are electrically and mechanically equivalent. The part number suffix difference does not reflect any variation in the parameters listed in this reference.

Q: Can these connectors be used in high-temperature applications?

A: Both parts are rated for operating temperatures from -55°C to 125°C. Applications requiring operation outside this range would require alternative connector selection.