TSW-107-20-G-D-LL Equivalent & Substitute Parts

Part Overview

The TSW-107-20-G-D-LL is an active rectangular connector header manufactured by Samtec Inc., designed for through-hole mounting applications. This 14-position, 2-row connector operates across the industrial temperature range of -55°C to 125°C and meets RoHS3 compliance requirements. Alternative equivalent parts may be required due to inventory availability, specific insulation material requirements, or application-specific performance needs.

Substiute Parts

TSW-107-20-G-D-LL

Samtec Inc.In Stock: 879TSW-107-20-G-D-LL Datasheet

Current PartRFQ

HTSW-107-20-G-D-LL

Samtec Inc.In Stock: 1098HTSW-107-20-G-D-LL Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TSW-107-20-G-D-LL is determined by the following critical parameters:

• Connector Type: Header
• Contact Type: Male Pin
• Number of Positions: 14
• Number of Rows: 2
• Pitch - Mating: 0.100" (2.54mm)
• Row Spacing - Mating: 0.100" (2.54mm)
• Mounting Type: Through Hole
• Termination: Kinked Pin, Solder
• Fastening Type: Push-Pull
• Operating Temperature Range: -55°C ~ 125°C
• Material Flammability Rating: UL94 V-0

The HTSW-107-20-G-D-LL meets all critical substitution criteria. Both parts share identical mechanical and electrical interface specifications, allowing direct functional replacement in applications requiring 14-position, 2.54mm pitch header connectors with through-hole solder termination.

Parameter Comparison

Engineering Selection Recommendations

Both TSW-107-20-G-D-LL and HTSW-107-20-G-D-LL are active products from Samtec Inc. with identical mechanical and electrical interface specifications. Selection between these parts should be based on:

• Insulation material requirements: TSW-107-20-G-D-LL uses PBT insulation; HTSW-107-20-G-D-LL uses LCP insulation
• Inventory availability and lead time considerations
• Application-specific environmental or performance requirements related to insulation material properties
• Both parts meet RoHS3 compliance and UL94 V-0 flammability standards
• Both parts operate across the full industrial temperature range of -55°C to 125°C

Frequently Asked Questions (FAQ)

Q: Can HTSW-107-20-G-D-LL be used as a direct replacement for TSW-107-20-G-D-LL?

A: Yes. Both connectors share identical mechanical and electrical interface specifications, including 14-position configuration, 2.54mm pitch, through-hole mounting, and push-pull fastening. The primary difference is the insulation material (PBT versus LCP), which does not affect mechanical compatibility or electrical performance in standard applications.

Q: What is the difference between PBT and LCP insulation materials?

A: PBT (Polybutylene Terephthalate) and LCP (Liquid Crystal Polymer) are both thermoplastic materials with UL94 V-0 flammability ratings. The specific performance characteristics of each material are determined by their respective material properties, which are not detailed in the provided specifications.

Q: Are both parts RoHS3 compliant?

A: Yes. Both TSW-107-20-G-D-LL and HTSW-107-20-G-D-LL are ROHS3 compliant and carry EAR99 export classification.

Q: What is the operating temperature range for these connectors?

A: Both parts operate across -55°C to 125°C, suitable for industrial applications.

Q: Are there any differences in contact finish specifications?

A: No. Both parts feature gold-plated contacts with identical finish thickness specifications: 10.0µin (0.25µm) on mating surfaces and 3.00µin (0.076µm) on post surfaces.