TSW-107-09-G-D-NA Equivalent & Substitute Parts

Part Overview

The TSW-107-09-G-D-NA is a rectangular connector header manufactured by Samtec Inc., designed for through-hole, right-angle board-to-board or cable applications. This 14-position connector operates across -55°C to 125°C and maintains Active product status. Substitute parts become necessary when addressing specific application requirements related to insulation material properties, mounting orientation variations, or inventory availability while maintaining electrical and mechanical compatibility.

Substiute Parts

TSW-107-09-G-D-NA

Samtec Inc.In Stock: 811TSW-107-09-G-D-NA Datasheet

Current PartRFQ

HTSW-107-09-G-D-RA

Samtec Inc.In Stock: 956HTSW-107-09-G-D-RA Datasheet

SimilarRFQ

TSW-107-09-G-D-RA

Samtec Inc.In Stock: 853TSW-107-09-G-D-RA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TSW-107-09-G-D-NA is determined by the following critical parameters that must remain constant across all equivalent parts:

• Number of Positions: 14
• Number of Rows: 2
• Pitch - Mating: 0.100" (2.54mm)
• Row Spacing - Mating: 0.100" (2.54mm)
• Connector Type: Header
• Contact Type: Male Pin
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Contact Finish - Mating: Gold
• Contact Material: Phosphor Bronze
• Operating Temperature: -55°C ~ 125°C
• Material Flammability Rating: UL94 V-0
• RoHS Status: ROHS3 Compliant

Variations in insulation material (Polybutylene Terephthalate vs. Liquid Crystal Polymer), insulation height, insulation color, and Moisture Sensitivity Level do not affect functional substitution when the above parameters remain identical.

Parameter Comparison

Engineering Selection Recommendations

Both TSW-107-09-G-D-RA and HTSW-107-09-G-D-RA are functionally equivalent substitutes for TSW-107-09-G-D-NA based on maintained electrical and mechanical parameters. All three parts maintain Active product status and ROHS3 compliance.

TSW-107-09-G-D-RA shares identical insulation material (PBT), insulation height, and color specifications with the main part, differing only in base product number designation within the same TSW series.

HTSW-107-09-G-D-RA operates within the same electrical and thermal specifications but employs Liquid Crystal Polymer (LCP) insulation with increased insulation height (0.240" vs. 0.219") and natural color finish. The HTSW series designation and LCP material represent the primary differentiators while maintaining full compatibility with the core 14-position, 2.54mm pitch header specification.

Frequently Asked Questions (FAQ)

Q: Can TSW-107-09-G-D-RA be used as a direct replacement for TSW-107-09-G-D-NA?

A: Yes. Both parts maintain identical electrical and mechanical specifications including 14 positions, 2.54mm pitch, through-hole right-angle mounting, gold-plated phosphor bronze contacts, and -55°C to 125°C operating range. The base product number difference does not affect functional compatibility.

Q: What is the significance of the insulation material difference between PBT and LCP in the HTSW-107-09-G-D-RA?

A: Insulation material selection affects mechanical and thermal properties but does not alter the electrical interface or mating characteristics. Both PBT and LCP meet UL94 V-0 flammability requirements and operate across the specified temperature range. Material selection depends on application-specific environmental and mechanical requirements.

Q: Does the increased insulation height of HTSW-107-09-G-D-RA (0.240" vs. 0.219") affect board layout compatibility?

A: The insulation height difference must be evaluated against specific PCB design constraints and clearance requirements. While the mating pitch and contact specifications remain identical, board-level spacing and component placement may require verification for applications with tight vertical clearances.

Q: Are all three parts RoHS3 compliant?

A: Yes. TSW-107-09-G-D-NA, TSW-107-09-G-D-RA, and HTSW-107-09-G-D-RA all maintain ROHS3 Compliant status.

Q: What is the difference between MSL 1 (Unlimited) and Not Applicable?

A: MSL 1 (Unlimited) indicates the component has no moisture sensitivity limitations and requires no special storage or handling precautions. Not Applicable indicates the classification does not apply to that particular part variant. Both conditions are compatible with standard component handling practices.