TSW-107-09-G-D-003 Equivalent & Substitute Parts

Part Overview

The TSW-107-09-G-D-003 is a rectangular connector header manufactured by Samtec Inc., designed for through-hole mounting applications. This vertical header connector features 14 positions arranged in 2 rows with 0.100" (2.54mm) pitch spacing, suitable for board-to-board or cable interconnections. The part is currently active in production with 808 units in stock. Substitute parts are identified to support design flexibility, inventory management, and supply chain continuity for applications requiring equivalent electrical and mechanical performance.

Substiute Parts

TSW-107-09-G-D-003

Samtec Inc.In Stock: 858TSW-107-09-G-D-003 Datasheet

Current PartRFQ

TSW-107-09-G-D-005

Samtec Inc.In Stock: 761TSW-107-09-G-D-005 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TSW-107-09-G-D-003 is determined by strict equivalence across the following critical parameters:

Connector type, contact type, number of positions, number of rows, mating pitch, row spacing, mounting type, termination method, contact finish material, insulation material, and operating temperature range must be identical. The substitute part TSW-107-09-G-D-005 meets all these criteria, differing only in inventory availability and internal manufacturing specifications that do not affect electrical or mechanical compatibility.

Both parts belong to the TSW series from Samtec Inc., share the same base product number (TSW-107), and maintain identical dimensional and performance characteristics for board-to-board or cable applications in through-hole PCB assemblies.

Parameter Comparison

Engineering Selection Recommendations

Both TSW-107-09-G-D-003 and TSW-107-09-G-D-005 are active production parts from Samtec Inc. with full ROHS3 compliance and UL94 V-0 flammability certification. Selection between these parts should be based on inventory availability and lead time requirements, as all electrical, mechanical, and environmental specifications are identical. The TSW-107-09-G-D-003 currently maintains higher stock levels (808 units) compared to TSW-107-09-G-D-005 (667 units). Both parts are suitable for applications requiring through-hole rectangular connectors with 14-position, 2-row configuration and 0.100" pitch spacing across the operating temperature range of -55°C to 125°C.

Frequently Asked Questions (FAQ)

Q: Can TSW-107-09-G-D-005 be used as a direct replacement for TSW-107-09-G-D-003?

A: Yes. Both parts are electrically and mechanically equivalent. All critical parameters including connector type, position count, row configuration, pitch spacing, contact materials, finishes, insulation properties, and operating temperature range are identical. The parts differ only in manufacturing lot designation and current inventory levels.

Q: What are the key parameters that determine substitution eligibility?

A: Substitution is valid when the following parameters match: connector type (Header), contact type (Male Pin), number of positions (14), number of rows (2), mating pitch (0.100"/2.54mm), row spacing (0.100"/2.54mm), mounting type (Through Hole), termination method (Solder), contact finish material (Gold), insulation material (PBT), and operating temperature range (-55°C to 125°C).

Q: Are there any compatibility concerns when switching between these parts?

A: No compatibility concerns exist. Both parts are designed for identical PCB footprints and mating interface specifications. They are interchangeable in all board-to-board and cable connection applications.

Q: What is the significance of the part number suffix difference between TSW-107-09-G-D-003 and TSW-107-09-G-D-005?

A: The suffix designates different manufacturing batches or internal production variants. The base product number TSW-107 and all functional specifications remain constant. The suffix does not indicate functional differences relevant to circuit design or assembly.

Q: Are both parts RoHS compliant?

A: Yes. Both TSW-107-09-G-D-003 and TSW-107-09-G-D-005 are ROHS3 compliant with Moisture Sensitivity Level 1 (Unlimited), suitable for standard PCB assembly processes without special handling requirements.