TSW-107-08-G-S-LC Equivalent & Substitute Parts

Part Overview

The TSW-107-08-G-S-LC is a rectangular connector header manufactured by Samtec Inc., designed for through-hole mounting applications. This 7-position, 0.100" (2.54mm) pitch connector features gold-plated phosphor bronze contacts and is classified as an active product. Equivalent and substitute parts are identified based on matching electrical and mechanical specifications within the 2.54mm pitch header connector category.

Key Parameters

Parameter	TSW-107-08-G-S-LC
Manufacturer	Samtec Inc.
Connector Type	Header
Contact Type	Male Pin
Pitch - Mating	0.100" (2.54mm)
Number of Positions	7
Number of Rows	1
Mounting Type	Through Hole
Termination	Solder
Contact Finish - Mating	Gold
Contact Material	Phosphor Bronze
Insulation Material	Polybutylene Terephthalate (PBT)
Operating Temperature	-55°C ~ 125°C
Product Status	Active
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following critical parameters:

Pitch - Mating: 0.100" (2.54mm)
Number of Positions: 7
Number of Rows: 1
Connector Type: Header
Contact Type: Male Pin
Mounting Type: Through Hole
Termination: Solder
Fastening Type: Push-Pull

Substitute parts must match all core parameters listed above. Secondary parameters such as contact finish thickness, insulation material composition, and post length may vary within acceptable tolerances for board-level compatibility. Parts with obsolete product status are included for reference but should be evaluated for long-term availability.

Parameter Comparison

Parameter	TSW-107-08-G-S-LC (Samtec)	0022284070 (Molex)	350-10-107-00-001000 (Mill-Max)	68000-107HLF (Amphenol ICC)	68001-107HLF (Amphenol ICC)	68001-207HLF (Amphenol ICC)	77311-102-07LF (Amphenol ICC)	77311-118-07LF (Amphenol ICC)
Manufacturer	Samtec Inc.	Molex	Mill-Max Manufacturing Corp.	Amphenol ICC (FCI)	Amphenol ICC (FCI)	Amphenol ICC (FCI)	Amphenol ICC (FCI)	Amphenol ICC (FCI)
Connector Type	Header	Header, Breakaway	Header	Header	Header	Header	Header	Header
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Number of Positions	7	7	7	7	7	7	7	7
Number of Rows	1	1	1	1	1	1	1	1
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Fastening Type	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull
Contact Finish - Mating	Gold	Tin	Gold	Gold or Gold, GXT™	Gold or Gold, GXT™	Gold or Gold, GXT™	Gold or Gold, GXT™	Gold or Gold, GXT™
Contact Material	Phosphor Bronze	Not specified	Brass Alloy	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze
Operating Temperature	-55°C ~ 125°C	Not specified	Not specified	-65°C ~ 125°C	-65°C ~ 125°C	-65°C ~ 125°C	-65°C ~ 125°C	-65°C ~ 125°C
Product Status	Active	Active	Active	Active	Active	Active	Active	Active
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

All listed substitute parts are active products with RoHS compliance and MSL 1 rating, ensuring compatibility with standard manufacturing and storage conditions. The TSW-107-08-G-S-LC, 68001-107HLF, 68001-207HLF, 77311-102-07LF, and 77311-118-07LF maintain phosphor bronze contact material with gold plating, providing consistent electrical performance across the group. The 0022284070 (Molex) features tin plating and polyamide insulation, representing an alternative material set within the same pitch and position specification. The 350-10-107-00-001000 (Mill-Max) uses brass alloy contacts with circular contact geometry, differing from the square contact design of other options.

For applications requiring extended temperature operation, Amphenol ICC parts rated to -65°C provide a 10°C lower minimum threshold compared to the TSW-107-08-G-S-LC. All active-status parts maintain equivalent through-hole solder termination and push-pull fastening characteristics.

Frequently Asked Questions (FAQ)

Q: Can TSW-107-08-G-S-LC be directly replaced with 0022284070?

A: Both parts share identical pitch (0.100"), position count (7), row configuration (1), and mounting type (through hole). The 0022284070 uses tin plating instead of gold and polyamide insulation instead of PBT. Substitution is mechanically and electrically feasible for applications where contact finish material differences are acceptable.

Q: What is the primary difference between Amphenol ICC BERGSTIK® II and BERGSTIK® series parts?

A: BERGSTIK® II parts (68000-107HLF, 68001-107HLF, 68001-207HLF) are active products with current specifications (3A per contact). BERGSTIK® parts (77311-102-07LF, 77311-118-07LF) are also active but represent an earlier series designation. Both series maintain identical pitch, position, and mounting specifications.

Q: Does contact finish thickness affect substitution compatibility?

A: Contact finish thickness variations (10.0µin to 30.0µin for mating surfaces) do not prevent mechanical or electrical substitution. These variations reflect manufacturing process differences between suppliers and do not impact board-level connector mating or signal integrity for standard applications.

Q: Why is 75160-802-07LF not recommended as a substitute?

A: The 75160-802-07LF carries an obsolete product status, indicating discontinued manufacturing and potential supply chain unavailability. Active-status alternatives should be prioritized for new designs and ongoing production.

Q: Are there packaging differences between substitute options?

A: The TSW-107-08-G-S-LC is supplied in bulk packaging. Molex 0022284070 is bulk packaged. Amphenol ICC BERGSTIK® II parts (68000-107HLF, 68001-107HLF, 68001-207HLF) are supplied in bag packaging. Amphenol ICC BERGSTIK® parts (77311-102-07LF, 77311-118-07LF) are bulk packaged. Packaging differences do not affect component functionality but may influence procurement and handling procedures.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message