TSW-107-08-G-D-LL-LC Equivalent & Substitute Parts

Part Overview

The TSW-107-08-G-D-LL-LC is an active rectangular connector header manufactured by Samtec Inc., designed for through-hole board-to-board or cable applications. This 14-position, 2-row connector with 0.100" (2.54mm) pitch provides male pin contacts with gold-plated phosphor bronze construction and kinked pin solder termination. The part is ROHS3 compliant with UL94 V-0 flammability rating and operates across -55°C to 125°C. Equivalent and substitute parts are identified to support design flexibility, inventory management, and supply chain continuity for applications requiring compatible rectangular connector headers with matching electrical and mechanical specifications.

Key Parameters

Parameter	Value
Manufacturer Part Number	TSW-107-08-G-D-LL-LC
Manufacturer	Samtec Inc.
Category	Rectangular Connectors
Connector Type	Header
Contact Type	Male Pin
Number of Positions	14
Number of Rows	2
Pitch - Mating	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole
Termination	Kinked Pin, Solder
Contact Finish - Mating	Gold
Contact Material	Phosphor Bronze
Insulation Material	Polybutylene Terephthalate (PBT)
Operating Temperature	-55°C ~ 125°C
Material Flammability Rating	UL94 V-0
RoHS Status	ROHS3 Compliant
Product Status	Active

Substitute Part Grouping Explanation

Substitution eligibility for the TSW-107-08-G-D-LL-LC is determined by strict equivalence across the following critical parameters:

Connector Type & Contact Configuration: Header with male pin contacts
Position Count & Row Configuration: 14 positions in 2 rows
Pitch Specifications: 0.100" (2.54mm) mating pitch and row spacing
Mounting & Termination: Through-hole mounting with kinked pin solder termination
Contact Properties: Gold-plated phosphor bronze construction
Electrical & Environmental Compliance: ROHS3 compliance and UL94 V-0 flammability rating
Operating Temperature Range: -55°C to 125°C

Substitute parts must maintain identical values across all listed parameters. Variations in insulation material (PBT versus LCP) and insulation color do not affect functional substitution when all other electrical and mechanical specifications remain equivalent.

Parameter Comparison

Parameter	TSW-107-08-G-D-LL-LC	HTSW-107-08-G-D-LL	TSW-107-08-G-D-LL
Manufacturer	Samtec Inc.	Samtec Inc.	Samtec Inc.
Connector Type	Header	Header	Header
Contact Type	Male Pin	Male Pin	Male Pin
Number of Positions	14	14	14
Number of Rows	2	2	2
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole	Through Hole	Through Hole
Termination	Kinked Pin, Solder	Kinked Pin, Solder	Kinked Pin, Solder
Contact Finish - Mating	Gold	Gold	Gold
Contact Material	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze
Insulation Material	Polybutylene Terephthalate (PBT)	Liquid Crystal Polymer (LCP)	Polybutylene Terephthalate (PBT)
Operating Temperature	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Active	Active	Active

Engineering Selection Recommendations

All three parts—TSW-107-08-G-D-LL-LC, HTSW-107-08-G-D-LL, and TSW-107-08-G-D-LL—maintain active product status with ROHS3 compliance and UL94 V-0 flammability certification. Selection between these parts is based on insulation material availability and inventory requirements rather than functional performance differences.

TSW-107-08-G-D-LL-LC and TSW-107-08-G-D-LL are functionally identical, both utilizing PBT insulation material with black insulation color. HTSW-107-08-G-D-LL substitutes with LCP insulation material and natural insulation color while maintaining all critical electrical and mechanical specifications. The choice between PBT and LCP insulation depends on application-specific thermal or chemical resistance requirements not specified in the provided parameters.

Frequently Asked Questions (FAQ)

Q: Can HTSW-107-08-G-D-LL be used as a direct replacement for TSW-107-08-G-D-LL-LC?

A: Yes. Both parts share identical connector type, position count, pitch, mounting method, contact material, and operating temperature range. The difference in insulation material (LCP versus PBT) does not affect functional compatibility when electrical and mechanical specifications are equivalent.

Q: What is the difference between TSW-107-08-G-D-LL-LC and TSW-107-08-G-D-LL?

A: These parts are functionally equivalent. Both use PBT insulation with black color and share all critical electrical and mechanical parameters. The designation difference reflects internal Samtec product numbering but does not indicate functional variation.

Q: Are there any compatibility concerns when substituting between these parts?

A: No compatibility concerns exist when substituting between TSW-107-08-G-D-LL-LC, HTSW-107-08-G-D-LL, and TSW-107-08-G-D-LL. All parts maintain identical pitch, position count, row spacing, contact configuration, and operating temperature specifications required for board-to-board or cable applications.

Q: Does insulation material selection affect performance?

A: Insulation material selection (PBT or LCP) does not affect the electrical or mechanical performance parameters provided for these parts. Material selection is determined by application-specific environmental or thermal requirements beyond the scope of the provided specifications.

Q: What certifications apply to all substitute parts?

A: All three parts are ROHS3 compliant and carry UL94 V-0 flammability rating, meeting regulatory requirements for electronic component applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message