TSW-107-05-G-D-006 Equivalent & Substitute Parts

Part Overview

The TSW-107-05-G-D-006 is a rectangular connector header manufactured by Samtec Inc., designed for through-hole mounting applications. This vertical header connector features 14 positions arranged in 2 rows with 0.100" (2.54mm) pitch spacing, suitable for board-to-board or cable interconnection. The part is currently active in production with 940 units in stock. Alternative equivalent parts may be required due to inventory constraints, application-specific insulation material requirements, or design revision updates.

Substiute Parts

TSW-107-05-G-D-006

Samtec Inc.In Stock: 1029TSW-107-05-G-D-006 Datasheet

Current PartRFQ

HTSW-107-05-G-D-014

Samtec Inc.In Stock: 876HTSW-107-05-G-D-014 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TSW-107-05-G-D-006 is determined by the following critical parameters that must remain constant across equivalent parts:

• Connector Type: Header
• Contact Type: Male Pin
• Number of Positions: 14
• Number of Rows: 2
• Pitch - Mating: 0.100" (2.54mm)
• Row Spacing - Mating: 0.100" (2.54mm)
• Mounting Type: Through Hole
• Termination: Solder
• Contact Finish - Mating: Gold
• Operating Temperature Range: -55°C ~ 125°C
• Material Flammability Rating: UL94 V-0
• RoHS Status: ROHS3 Compliant

The identified substitute part HTSW-107-05-G-D-014 maintains all critical electrical and mechanical parameters. The primary difference lies in the insulation material composition (Liquid Crystal Polymer vs. Polybutylene Terephthalate) and the associated moisture sensitivity level classification, which does not affect functional compatibility in standard applications.

Parameter Comparison

Engineering Selection Recommendations

Both TSW-107-05-G-D-006 and HTSW-107-05-G-D-014 are active production parts from Samtec Inc. with identical electrical and mechanical specifications. Both maintain ROHS3 compliance and UL94 V-0 flammability certification. The parts are functionally interchangeable for standard through-hole header applications requiring 14-position, 2-row connectors with 2.54mm pitch spacing.

Selection between these parts should be based on inventory availability and application-specific requirements regarding insulation material properties. The TSW series uses polybutylene terephthalate insulation with MSL 1 classification, while the HTSW series uses liquid crystal polymer insulation with non-applicable MSL classification.

Frequently Asked Questions (FAQ)

Q: Are TSW-107-05-G-D-006 and HTSW-107-05-G-D-014 mechanically compatible?

A: Yes. Both parts share identical pitch spacing (0.100"), row configuration (2 rows of 14 positions), contact dimensions, and through-hole mounting specifications. They are mechanically interchangeable.

Q: What is the difference between the insulation materials used in these parts?

A: TSW-107-05-G-D-006 uses Polybutylene Terephthalate (PBT) insulation, while HTSW-107-05-G-D-014 uses Liquid Crystal Polymer (LCP) insulation. Both materials meet UL94 V-0 flammability requirements and operate across the same temperature range (-55°C to 125°C).

Q: Can these parts be used interchangeably in existing PCB designs?

A: Yes. The identical pitch, row spacing, contact length, and overall dimensions ensure direct compatibility with existing PCB footprints and mating connectors designed for either part number.

Q: Are both parts RoHS compliant?

A: Yes. Both TSW-107-05-G-D-006 and HTSW-107-05-G-D-014 are ROHS3 compliant.

Q: What is the moisture sensitivity level difference between these parts?

A: TSW-107-05-G-D-006 is classified as MSL 1 (Unlimited), indicating no moisture sensitivity restrictions. HTSW-107-05-G-D-014 has a non-applicable MSL classification. This difference does not affect functional performance in standard applications.