TSW-106-17-L-S Equivalent & Substitute Parts

Part Overview

The TSW-106-17-L-S is a vertical rectangular connector header manufactured by Samtec Inc., designed for through-hole board-to-board or cable applications. This 6-position connector operates across a wide temperature range of -55°C to 125°C and features gold-plated mating contacts with tin-plated posts. The part is currently discontinued at DiGi Electronics, making equivalent substitutes necessary for ongoing design requirements and procurement needs.

Substiute Parts

TSW-106-17-L-S

Samtec Inc.In Stock: 1075TSW-106-17-L-S Datasheet

Current PartRFQ

0022284064

MolexIn Stock: 21260022284064 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TSW-106-17-L-S is determined by strict alignment of the following critical parameters:

• Connector Type: Header with male pin contacts
• Pitch - Mating: 0.100" (2.54mm) spacing
• Number of Positions: 6-position configuration
• Number of Rows: Single row layout
• Mounting Type: Through hole solder termination
• Fastening Type: Push-Pull mechanism
• Contact Finish: Gold mating surface with tin posts
• Insulation Material: Thermoplastic polymer (PBT or equivalent)
• Operating Temperature Range: -55°C to 125°C minimum
• Flammability Rating: UL94 V-0 compliance
• RoHS Compliance: ROHS3 Compliant

The Molex 0022284064 meets all critical substitution criteria, with documented compatibility across these parameters.

Parameter Comparison

Engineering Selection Recommendations

The Molex 0022284064 is a direct functional equivalent for the discontinued TSW-106-17-L-S. Both connectors maintain identical pitch, position count, contact configuration, and fastening mechanism. Both achieve UL94 V-0 flammability certification and ROHS3 compliance, meeting regulatory requirements for equivalent applications.

The primary distinction lies in insulation material composition: the TSW-106-17-L-S uses polybutylene terephthalate (PBT), while the Molex substitute employs glass-filled polyamide (PA/nylon). Both materials satisfy the operating temperature range of -55°C to 125°C and moisture sensitivity level 1 classification.

The Molex part is currently in active production with higher inventory availability (2110 units versus 970 units), providing superior supply chain continuity for new designs and production requirements.

Frequently Asked Questions (FAQ)

Q: Are the TSW-106-17-L-S and Molex 0022284064 mechanically interchangeable?

A: Yes. Both connectors share identical pitch spacing (0.100" / 2.54mm), position count (6), row configuration (1), and push-pull fastening mechanism. Through-hole solder termination is identical on both parts.

Q: What is the difference in contact length between these connectors?

A: The TSW-106-17-L-S has an overall contact length of 0.830" (21.08mm), while the Molex 0022284064 measures 0.530" (13.46mm). This difference may affect board-to-board stacking height and mating depth in confined applications. Verify PCB layout compatibility before substitution.

Q: Do both connectors meet the same compliance standards?

A: Yes. Both parts are ROHS3 compliant, REACH unaffected, and carry UL94 V-0 flammability certification. Both are classified as moisture sensitivity level 1 (unlimited shelf life).

Q: Why is the insulation material different between the two parts?

A: The TSW-106-17-L-S uses polybutylene terephthalate (PBT), while the Molex 0022284064 uses glass-filled polyamide (PA/nylon). Both materials are thermoplastic polymers rated for the same operating temperature range (-55°C to 125°C) and provide equivalent electrical insulation performance for this connector class.

Q: Is the Molex part available in higher quantities?

A: Yes. The Molex 0022284064 has 2110 units in stock compared to 970 units for the discontinued Samtec part, providing better availability for production and design requirements.

Q: What is the difference in contact finish thickness?

A: The TSW-106-17-L-S mating contact finish is 10.0µin (0.25µm) gold, while the Molex part specifies 15.0µin (0.38µm). Both provide adequate corrosion resistance and electrical conductivity for standard applications. The Molex post finish is 100.0µin (2.54µm) tin compared to unspecified thickness on the Samtec part.