TSW-106-14-F-D-LL Equivalent & Substitute Parts

Part Overview

The TSW-106-14-F-D-LL is a rectangular connector header manufactured by Samtec Inc., designed for through-hole mounting applications. This 12-position, 2-row connector operates across an extended temperature range of -55°C to 125°C and features gold-plated mating contacts with phosphor bronze material. The part maintains Active product status and full RoHS3 compliance. Equivalent and substitute parts are identified based on matching core electrical and mechanical parameters to ensure functional interchangeability in board-to-board connector applications.

Key Parameters

Parameter	Value
Connector Type	Header
Contact Type	Male Pin
Number of Positions	12
Number of Rows	2
Pitch - Mating	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole
Shrouding	Unshrouded
Fastening Type	Push-Pull
Contact Finish - Mating	Gold
Insulation Material	Polybutylene Terephthalate (PBT)
Operating Temperature Range	-55°C ~ 125°C
Material Flammability Rating	UL94 V-0
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the TSW-106-14-F-D-LL is determined by strict alignment of the following core parameters:

Connector Type & Contact Configuration: Header with male pins, 12 positions in 2 rows
Pitch Specifications: 0.100" (2.54mm) mating pitch and row spacing
Mounting & Termination: Through-hole solder termination with push-pull fastening
Electrical & Environmental Compliance: UL94 V-0 flammability rating, RoHS compliance, and MSL rating of 1

All substitute parts listed maintain these core specifications. Variations in contact length, contact finish thickness, insulation material composition, and operating temperature ranges are documented to enable informed selection based on specific application requirements.

Parameter Comparison

Parameter	TSW-106-14-F-D-LL (Samtec)	87894-112HLF (Amphenol ICC)	929710-10-06-RK (3M)	929715-01-06-EU (3M)	929715-03-06-I (3M)	929715-10-06-I (3M)
Manufacturer	Samtec Inc.	Amphenol ICC (FCI)	3M	3M	3M	3M
Series	TSW	BERGSTIK® II	929	929	929	929
Number of Positions	12	12	12	12	12	12
Number of Rows	2	2	2	2	2	2
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Shrouding	Unshrouded	Unshrouded	Unshrouded	Unshrouded	Unshrouded	Unshrouded
Fastening Type	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull
Contact Length - Mating	0.320" (8.13mm)	0.318" (8.08mm)	0.318" (8.08mm)	0.318" (8.08mm)	0.318" (8.08mm)	0.318" (8.08mm)
Contact Length - Post	0.110" (2.79mm)	0.170" (4.32mm)	0.175" (4.45mm)	0.110" (2.79mm)	0.410" (10.41mm)	0.175" (4.45mm)
Overall Contact Length	0.530" (13.46mm)	0.588" (14.94mm)	0.593" (15.07mm)	0.528" (13.42mm)	0.828" (21.03mm)	0.593" (15.07mm)
Contact Finish - Mating	Gold	Gold or Gold, GXT™	Tin	Gold	Gold	Gold
Contact Finish Thickness - Mating	3.00µin (0.076µm)	30.0µin (0.76µm)	200.0µin (5.08µm)	10.0µin (0.25µm)	10.0µin (0.25µm)	10.0µin (0.25µm)
Contact Material	Phosphor Bronze	Not specified	Copper Alloy	Copper Alloy	Copper Alloy	Copper Alloy
Insulation Material	Polybutylene Terephthalate (PBT)	Not specified	Polycyclohexylenedimethylene Terephthalate (PCT)	Polycyclohexylenedimethylene Terephthalate (PCT)	Polybutylene Terephthalate (PBT), Polyester, Glass Filled	Polybutylene Terephthalate (PBT), Polyester, Glass Filled
Operating Temperature Range	-55°C ~ 125°C	Not specified	-40°C ~ 105°C	-40°C ~ 105°C	-40°C ~ 105°C	-40°C ~ 105°C
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	ROHS3 Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	Not Applicable	1 (Unlimited)	Not Applicable	Not Applicable
Product Status	Active	Active	Active	Active	Active	Active

Engineering Selection Recommendations

All listed substitute parts maintain Active product status and comply with RoHS regulations, ensuring regulatory continuity. The TSW-106-14-F-D-LL operates across -55°C to 125°C, providing the widest temperature range among the group. The 3M 929 series parts operate within -40°C to 105°C, which is suitable for applications not requiring the extended low-temperature performance of the Samtec part.

Contact post length varies significantly across substitutes, ranging from 0.110" (2.79mm) to 0.410" (10.41mm). Selection should account for PCB thickness and solder joint requirements. The 929715-01-06-EU and TSW-106-14-F-D-LL share identical post lengths of 0.110" (2.79mm), making them the closest mechanical match for applications with standard PCB thicknesses.

Contact finish thickness differs substantially. The TSW-106-14-F-D-LL specifies 3.00µin (0.076µm) gold plating, while 3M parts specify 10.0µin (0.25µm). The Amphenol ICC 87894-112HLF provides 30.0µin (0.76µm) gold plating, and the 3M 929710-10-06-RK offers 200.0µin (5.08µm) tin plating. These variations affect contact durability and corrosion resistance in different environmental conditions.

Insulation material composition varies. The TSW-106-14-F-D-LL uses standard PBT, while the 3M 929715-03-06-I and 929715-10-06-I employ glass-filled PBT for enhanced mechanical properties. The 3M 929710-10-06-RK uses PCT material, which offers different thermal and chemical resistance characteristics.

Frequently Asked Questions (FAQ)

Q: Can the 3M 929 series parts directly replace the Samtec TSW-106-14-F-D-LL?

A: The 3M 929 series parts share the core connector specifications: 12 positions, 2 rows, 0.100" (2.54mm) pitch, through-hole mounting, and push-pull fastening. However, the operating temperature range differs. The TSW-106-14-F-D-LL operates from -55°C to 125°C, while 3M parts operate from -40°C to 105°C. Selection depends on application temperature requirements.

Q: What is the significance of contact post length variation?

A: Contact post length determines how deeply the connector penetrates the PCB during soldering. The TSW-106-14-F-D-LL and 929715-01-06-EU both specify 0.110" (2.79mm) post length, suitable for standard PCB thicknesses. The 929715-03-06-I specifies 0.410" (10.41mm), designed for thicker PCBs or applications requiring extended post engagement. Verify PCB thickness compatibility before selection.

Q: How do contact finish specifications affect connector performance?

A: Contact finish thickness and material influence corrosion resistance and contact reliability. The TSW-106-14-F-D-LL specifies 3.00µin (0.076µm) gold plating, providing standard corrosion protection. The 3M 929 series specifies 10.0µin (0.25µm) gold plating, offering enhanced protection. The 929710-10-06-RK uses 200.0µin (5.08µm) tin plating, suitable for applications not requiring gold's superior corrosion resistance.

Q: Are all substitute parts RoHS compliant?

A: Yes. The TSW-106-14-F-D-LL is ROHS3 compliant, and all substitute parts are RoHS compliant, ensuring regulatory alignment for applications subject to RoHS requirements.

Q: What packaging differences exist among these parts?

A: The TSW-106-14-F-D-LL is supplied in Bulk packaging. The Amphenol ICC 87894-112HLF is supplied in Bag packaging. The 3M 929 series parts are supplied in Bulk packaging. Packaging affects handling, storage, and inventory management but does not impact electrical or mechanical performance.

Q: How does insulation material composition affect part selection?

A: The TSW-106-14-F-D-LL uses standard PBT insulation. The 3M 929715-03-06-I and 929715-10-06-I use glass-filled PBT, which provides enhanced mechanical strength and dimensional stability. The 3M 929710-10-06-RK uses PCT material, which offers different thermal and chemical resistance. Selection should account for environmental exposure and mechanical stress requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message