TSW-106-13-G-S-RE Equivalent & Substitute Parts

Part Overview

The TSW-106-13-G-S-RE is a rectangular connector header manufactured by Samtec Inc., classified as a through-hole, right-angle mounted connector with 6 positions at 0.100" (2.54mm) pitch. This connector is designed for board-to-board or cable applications with male pin contacts and solder termination. The part maintains Active product status with full RoHS3 compliance and MSL Level 1 rating, making it suitable for standard industrial and commercial applications across the operating temperature range of -55°C to 125°C.

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained, allowing for component interchangeability in circuit designs without functional degradation.

Substiute Parts

TSW-106-13-G-S-RE

Samtec Inc.In Stock: 842TSW-106-13-G-S-RE Datasheet

Current PartRFQ

TSW-106-13-G-S-RA

Samtec Inc.In Stock: 812TSW-106-13-G-S-RA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TSW-106-13-G-S-RE is determined by strict equivalence across the following critical parameters:

• Manufacturer and Series: Samtec Inc., TSW series
• Connector Type and Contact Type: Header with Male Pin contacts
• Position Configuration: 6 positions, 1 row
• Pitch Specification: 0.100" (2.54mm) mating pitch
• Mounting and Termination: Through Hole, Right Angle with Solder termination
• Contact Material and Finish: Phosphor Bronze with Gold mating surface
• Insulation Material: Polybutylene Terephthalate (PBT)
• Environmental Compliance: ROHS3 Compliant, UL94 V-0 rated, MSL Level 1

The identified substitute part TSW-106-13-G-S-RA maintains all critical electrical and mechanical parameters, ensuring functional equivalence within the same product series and application context.

Parameter Comparison

Engineering Selection Recommendations

Both the TSW-106-13-G-S-RE and TSW-106-13-G-S-RA maintain identical electrical and mechanical specifications within the TSW series. Selection between these parts is based on product availability and inventory status. Both parts are Active products with full ROHS3 compliance and UL94 V-0 flammability certification, meeting standard industrial compliance requirements. The MSL Level 1 rating for both parts indicates unlimited shelf life without moisture sensitivity constraints. Current inventory levels show 792 units for TSW-106-13-G-S-RE and 719 units for TSW-106-13-G-S-RA, allowing for flexible procurement decisions based on supply chain requirements.

Frequently Asked Questions (FAQ)

Q: Are TSW-106-13-G-S-RE and TSW-106-13-G-S-RA electrically interchangeable?

A: Yes. Both parts share identical electrical specifications including contact material (Phosphor Bronze), contact finish (Gold), pitch (0.100"/2.54mm), number of positions (6), and operating temperature range (-55°C to 125°C).

Q: What are the mechanical differences between these substitute parts?

A: No mechanical differences exist between these parts. Both feature identical contact dimensions, insulation height, mounting type (Through Hole, Right Angle), and termination method (Solder).

Q: Do both parts meet the same compliance standards?

A: Yes. Both TSW-106-13-G-S-RE and TSW-106-13-G-S-RA are ROHS3 compliant, UL94 V-0 rated, and classified as MSL Level 1 with unlimited shelf life.

Q: Can these connectors be used in high-temperature applications?

A: Both parts are rated for operating temperatures from -55°C to 125°C, suitable for standard industrial temperature ranges. Applications requiring temperatures outside this range require alternative connector selection.

Q: What is the significance of the packaging designation for TSW-106-13-G-S-RA?

A: The TSW-106-13-G-S-RA is supplied in Bulk packaging, which may affect procurement quantities and handling procedures compared to alternative packaging formats.

Q: Are these parts suitable for moisture-sensitive environments?

A: Both parts carry MSL Level 1 rating, indicating no moisture sensitivity constraints. Standard storage conditions without specialized moisture control are acceptable.