TSW-105-11-L-D Equivalent & Substitute Parts

Part Overview

The TSW-105-11-L-D is an active rectangular connector header manufactured by Samtec Inc., designed for through-hole mounting applications. This vertical header connector accommodates 10 positions across 2 rows with 0.100" (2.54mm) pitch spacing, suitable for board-to-board or cable interconnection. The part is ROHS3 compliant and maintains an operating temperature range of -55°C to 125°C. Substitute parts are identified when electrical and mechanical parameters align with the main part specifications, enabling direct functional replacement in circuit designs.

Substiute Parts

TSW-105-11-L-D

Samtec Inc.In Stock: 860TSW-105-11-L-D Datasheet

Current PartRFQ

HTSW-105-11-L-D

Samtec Inc.In Stock: 908HTSW-105-11-L-D Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The HTSW-105-11-L-D qualifies as a direct substitute based on alignment of critical electrical and mechanical parameters. Substitution eligibility is determined by the following parameters:

• Connector Type: Header
• Contact Type: Male Pin
• Number of Positions: 10
• Number of Rows: 2
• Pitch - Mating: 0.100" (2.54mm)
• Row Spacing - Mating: 0.100" (2.54mm)
• Mounting Type: Through Hole
• Termination: Solder
• Fastening Type: Push-Pull
• Operating Temperature Range: -55°C ~ 125°C
• Material Flammability Rating: UL94 V-0
• RoHS Compliance: ROHS3 Compliant

The HTSW-105-11-L-D maintains identical specifications across all critical parameters, confirming functional equivalence for direct replacement applications.

Parameter Comparison

Engineering Selection Recommendations

Both the TSW-105-11-L-D and HTSW-105-11-L-D are active products from Samtec Inc. with ROHS3 compliance and UL94 V-0 flammability certification. The parts are electrically and mechanically equivalent across all critical connector specifications. Selection between these parts may be based on insulation material preference: the TSW-105-11-L-D uses Polybutylene Terephthalate (PBT), while the HTSW-105-11-L-D uses Liquid Crystal Polymer (LCP). Both materials meet the specified operating temperature range and flammability requirements. Current inventory levels are 783 units for TSW-105-11-L-D and 806 units for HTSW-105-11-L-D.

Frequently Asked Questions (FAQ)

Q: Can HTSW-105-11-L-D replace TSW-105-11-L-D in existing designs?

A: Yes. The HTSW-105-11-L-D is a direct functional equivalent. Both parts share identical connector type, contact configuration, pitch spacing, mounting method, and operating temperature specifications. The parts are interchangeable for board-to-board and cable applications.

Q: What is the difference between the insulation materials used in these parts?

A: The TSW-105-11-L-D uses Polybutylene Terephthalate (PBT) insulation, while the HTSW-105-11-L-D uses Liquid Crystal Polymer (LCP) insulation. Both materials are UL94 V-0 rated and support the -55°C to 125°C operating temperature range. Material selection depends on specific application requirements.

Q: Are both parts RoHS compliant?

A: Yes. Both the TSW-105-11-L-D and HTSW-105-11-L-D are ROHS3 compliant and carry EAR99 export classification.

Q: What are the key parameters that determine substitution eligibility?

A: Substitution is based on matching connector type, contact type, position count, row configuration, pitch spacing, mounting method, termination type, fastening mechanism, operating temperature range, and flammability rating. Both parts meet these criteria.

Q: Are there any packaging or inventory considerations?

A: Both parts are supplied in bulk packaging. Current inventory shows 783 units of TSW-105-11-L-D and 806 units of HTSW-105-11-L-D available as new original stock.