TSW-105-07-F-D-002 Equivalent & Substitute Parts

Part Overview

The TSW-105-07-F-D-002 is a rectangular connector header manufactured by Samtec Inc., designed for through-hole mounting applications. This vertical header connector features 10 positions arranged in 2 rows with 0.100" (2.54mm) pitch spacing, suitable for board-to-board or cable interconnection. The part is currently active in production with ROHS3 compliance and UL94 V-0 flammability rating. Substitute parts are identified when inventory constraints, lead time requirements, or procurement preferences necessitate alternative sourcing while maintaining electrical and mechanical compatibility.

Substiute Parts

TSW-105-07-F-D-002

Samtec Inc.In Stock: 1118TSW-105-07-F-D-002 Datasheet

Current PartRFQ

TSW-105-07-F-D-008

Samtec Inc.In Stock: 1504TSW-105-07-F-D-008 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TSW-105-07-F-D-002 is determined by strict equivalence across the following critical parameters:

• Connector type (Header)
• Contact type (Male Pin)
• Number of positions (10)
• Number of rows (2)
• Pitch spacing (0.100" / 2.54mm)
• Row spacing (0.100" / 2.54mm)
• Mounting type (Through Hole)
• Termination method (Solder)
• Contact material and finish specifications
• Insulation material (Polybutylene Terephthalate)
• Operating temperature range (-55°C ~ 125°C)
• Compliance certifications (ROHS3, UL94 V-0)

The identified substitute TSW-105-07-F-D-008 maintains identical specifications across all these parameters, confirming direct substitutability within the TSW series.

Parameter Comparison

Engineering Selection Recommendations

The TSW-105-07-F-D-008 is a direct equivalent to the TSW-105-07-F-D-002. Both parts are manufactured by Samtec Inc. within the same TSW series and maintain identical electrical, mechanical, and compliance specifications. Selection between these parts should be based on inventory availability and procurement lead times, as no technical differentiation exists between them. Both parts carry active product status, ROHS3 compliance, and UL94 V-0 flammability certification, confirming suitability for equivalent applications.

Frequently Asked Questions (FAQ)

Q: Can TSW-105-07-F-D-008 be used as a direct replacement for TSW-105-07-F-D-002?

A: Yes. Both parts are identical in all electrical and mechanical specifications, including connector type, contact configuration, pitch spacing, mounting method, termination type, contact materials, and operating temperature range. They are fully interchangeable.

Q: What determines substitutability for this connector header?

A: Substitutability is determined by equivalence in connector type (Header), contact type (Male Pin), position count (10), row configuration (2 rows), pitch spacing (0.100" / 2.54mm), row spacing (0.100" / 2.54mm), mounting type (Through Hole), termination method (Solder), contact material and finish specifications, insulation material (PBT), operating temperature range (-55°C ~ 125°C), and compliance certifications (ROHS3, UL94 V-0).

Q: Are there any differences in packaging or inventory between these parts?

A: Both parts are supplied in bulk packaging. Inventory levels differ, with TSW-105-07-F-D-002 having 1033 pieces and TSW-105-07-F-D-008 having 1493 pieces available as new original stock.

Q: Do both parts meet the same compliance standards?

A: Yes. Both TSW-105-07-F-D-002 and TSW-105-07-F-D-008 are ROHS3 compliant, carry UL94 V-0 flammability rating, and have Moisture Sensitivity Level 1 (Unlimited).

Q: What is the significance of the different part numbers if the specifications are identical?

A: The different part numbers (TSW-105-07-F-D-002 versus TSW-105-07-F-D-008) reflect internal Samtec manufacturing or inventory tracking designations. From an engineering perspective, they represent the same functional component within the TSW series.