TSW-104-16-S-S Equivalent & Substitute Parts

Part Overview

The TSW-104-16-S-S is an active rectangular connector header manufactured by Samtec Inc., designed for through-hole mounting applications. This vertical 4-position connector operates at 0.100" (2.54mm) pitch and is commonly used in board-to-board or cable interconnect applications. The part is ROHS3 compliant with UL94 V-0 flammability rating and operates across -55°C to 125°C temperature range. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when specific design parameters allow for functional equivalence.

Substiute Parts

TSW-104-16-S-S

Samtec Inc.In Stock: 936TSW-104-16-S-S Datasheet

Current PartRFQ

TSW-104-14-L-S

Samtec Inc.In Stock: 2459TSW-104-14-L-S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TSW-104-16-S-S is determined by strict equivalence across the following critical parameters:

• Manufacturer: Samtec Inc.
• Series: TSW
• Connector Type: Header
• Contact Type: Male Pin
• Number of Positions: 4
• Number of Rows: 1
• Pitch - Mating: 0.100" (2.54mm)
• Mounting Type: Through Hole
• Termination: Solder
• Fastening Type: Push-Pull
• Contact Material: Phosphor Bronze
• Insulation Material: Polybutylene Terephthalate (PBT)
• Operating Temperature: -55°C ~ 125°C
• Material Flammability Rating: UL94 V-0
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

The substitute part TSW-104-14-L-S meets all critical electrical and mechanical parameters. Variations in contact length specifications and contact finish thickness do not affect functional compatibility within the defined parameter set.

Parameter Comparison

Engineering Selection Recommendations

Both TSW-104-16-S-S and TSW-104-14-L-S are active products from Samtec Inc. with identical compliance certifications. Both parts are ROHS3 compliant and carry UL94 V-0 flammability rating. Selection between these parts depends on PCB design requirements related to post length and overall connector height. The TSW-104-16-S-S features longer contact posts (0.310" / 7.87mm) and overall length (0.730" / 18.54mm), while the TSW-104-14-L-S provides shorter dimensions (0.110" / 2.79mm post length, 0.530" / 13.46mm overall length). Both maintain identical electrical and mechanical interface specifications at 0.100" (2.54mm) pitch with 4-position configuration.

Frequently Asked Questions (FAQ)

Q: Can TSW-104-14-L-S be used as a direct replacement for TSW-104-16-S-S?

A: Both parts share identical connector type, contact configuration, pitch, mounting method, and compliance specifications. The primary difference is contact post length and overall connector height. Substitution is valid when PCB design accommodates the shorter post length of the TSW-104-14-L-S.

Q: What is the significance of the contact post length difference?

A: Contact post length determines how far the connector extends from the PCB surface. TSW-104-16-S-S has 0.310" (7.87mm) post length, while TSW-104-14-L-S has 0.110" (2.79mm) post length. This affects mating depth and clearance requirements in the application.

Q: Are both parts RoHS compliant?

A: Yes, both TSW-104-16-S-S and TSW-104-14-L-S are ROHS3 compliant with UL94 V-0 flammability rating.

Q: What is the operating temperature range for these connectors?

A: Both parts operate across -55°C to 125°C temperature range.

Q: Do these parts have different moisture sensitivity levels?

A: No, both parts have Moisture Sensitivity Level (MSL) of 1 (Unlimited), indicating no moisture sensitivity restrictions.