TSW-103-08-G-D-RA-005 Equivalent & Substitute Parts

Part Overview

The TSW-103-08-G-D-RA-005 is a rectangular connector header manufactured by Samtec Inc., designed for through-hole, right-angle board-to-board or cable applications. This connector features 6 positions across 2 rows with 0.100" (2.54mm) pitch spacing and solder termination. The part is currently active in production with 1040 units in stock. Equivalent and substitute parts within the TSW series share identical electrical and mechanical specifications, providing interchangeable options for component sourcing and inventory management.

Substiute Parts

TSW-103-08-G-D-RA-005

Samtec Inc.In Stock: 1145TSW-103-08-G-D-RA-005 Datasheet

Current PartRFQ

TSW-103-08-G-D-RA-001

Samtec Inc.In Stock: 1158TSW-103-08-G-D-RA-001 Datasheet

SimilarRFQ

TSW-103-08-G-D-RA-002

Samtec Inc.In Stock: 930TSW-103-08-G-D-RA-002 Datasheet

SimilarRFQ

TSW-103-08-G-D-RA-003

Samtec Inc.In Stock: 1196TSW-103-08-G-D-RA-003 Datasheet

SimilarRFQ

TSW-103-08-G-D-RA-004

Samtec Inc.In Stock: 1106TSW-103-08-G-D-RA-004 Datasheet

SimilarRFQ

TSW-103-08-G-D-RA-006

Samtec Inc.In Stock: 960TSW-103-08-G-D-RA-006 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

All substitute parts listed below are members of the Samtec TSW series and share identical electrical and mechanical specifications with the TSW-103-08-G-D-RA-005. Substitution is based on the following critical parameters that remain constant across all equivalent parts:

• Connector Type: Header
• Contact Type: Male Pin
• Number of Positions: 6
• Number of Rows: 2
• Pitch - Mating: 0.100" (2.54mm)
• Row Spacing - Mating: 0.100" (2.54mm)
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Contact Finish - Mating: Gold
• Contact Material: Phosphor Bronze
• Insulation Material: Polybutylene Terephthalate (PBT)
• Operating Temperature Range: -55°C ~ 125°C
• Material Flammability Rating: UL94 V-0
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

The substitute parts differ only in their trailing designator suffix, which does not affect functional or mechanical compatibility within the TSW-103 base product family.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed are active production components manufactured by Samtec Inc. and maintain full ROHS3 compliance and UL94 V-0 flammability certification. Selection among TSW-103-08-G-D-RA-001, TSW-103-08-G-D-RA-002, TSW-103-08-G-D-RA-003, TSW-103-08-G-D-RA-004, and TSW-103-08-G-D-RA-006 may be based on inventory availability. All parts are functionally and mechanically interchangeable for applications requiring a 6-position, 2-row, 0.100" pitch through-hole right-angle header connector with solder termination and gold-plated phosphor bronze contacts.

Frequently Asked Questions (FAQ)

Q: Are all TSW-103-08-G-D-RA substitute parts electrically identical? A: Yes. All substitute parts share identical electrical specifications including contact material (phosphor bronze), contact finish (gold plating), operating temperature range (-55°C ~ 125°C), and flammability rating (UL94 V-0).

Q: Can TSW-103-08-G-D-RA-005 be replaced with TSW-103-08-G-D-RA-001, TSW-103-08-G-D-RA-002, TSW-103-08-G-D-RA-003, TSW-103-08-G-D-RA-004, or TSW-103-08-G-D-RA-006 without design changes? A: Yes. All parts are mechanically and functionally equivalent. They share identical pitch spacing (0.100"), position count (6), row configuration (2 rows), mounting type (through-hole right-angle), and termination method (solder).

Q: What is the significance of the trailing designator suffix in the part number? A: The trailing suffix does not affect functional or mechanical compatibility. All variants within the TSW-103-08-G-D-RA family are interchangeable.

Q: Are all substitute parts RoHS compliant? A: Yes. All listed substitute parts are ROHS3 compliant and carry MSL rating of 1 (Unlimited).

Q: What is the moisture sensitivity level for these connectors? A: All parts carry MSL rating 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.