TSW-102-07-G-D-LL-001 Equivalent & Substitute Parts

Part Overview

The TSW-102-07-G-D-LL-001 is an active rectangular connector header manufactured by Samtec Inc. This through-hole vertical header connector features 4 positions arranged in 2 rows with 0.100" (2.54mm) pitch spacing. The connector is designed for board-to-board or cable applications with kinked pin solder termination and push-pull fastening. Substitute parts are identified to provide alternative sourcing options when the primary part number is unavailable or when inventory requirements necessitate alternative stock.

Substiute Parts

TSW-102-07-G-D-LL-001

Samtec Inc.In Stock: 1077TSW-102-07-G-D-LL-001 Datasheet

Current PartRFQ

TSW-102-07-G-D-LL-002

Samtec Inc.In Stock: 815TSW-102-07-G-D-LL-002 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TSW-102-07-G-D-LL-001 is determined by strict equivalence across the following critical parameters:

• Connector Type: Header
• Contact Type: Male Pin
• Number of Positions: 4
• Number of Rows: 2
• Pitch - Mating: 0.100" (2.54mm)
• Row Spacing - Mating: 0.100" (2.54mm)
• Mounting Type: Through Hole
• Termination: Kinked Pin, Solder
• Fastening Type: Push-Pull
• Operating Temperature Range: -55°C ~ 125°C
• RoHS Compliance: ROHS3 Compliant

The substitute part TSW-102-07-G-D-LL-002 maintains identical specifications across all critical electrical and mechanical parameters, confirming direct substitutability within the TSW series.

Parameter Comparison

Engineering Selection Recommendations

Both TSW-102-07-G-D-LL-001 and TSW-102-07-G-D-LL-002 are active products from Samtec Inc. with identical electrical and mechanical specifications. Selection between these part numbers is based on inventory availability and supply chain requirements. Both parts maintain ROHS3 compliance and UL94 V-0 flammability certification, meeting regulatory requirements for industrial and commercial applications. The TSW-102-07-G-D-LL-002 variant is suitable as a direct substitute when the primary part number is unavailable.

Frequently Asked Questions (FAQ)

Q: Can TSW-102-07-G-D-LL-002 be used as a direct replacement for TSW-102-07-G-D-LL-001?

A: Yes. Both parts are identical across all critical parameters including connector type, position count, pitch spacing, mounting type, termination method, and operating temperature range. No design modifications are required for substitution.

Q: Are there any differences in contact finish or material composition between these parts?

A: No. Both parts use phosphor bronze contacts with identical gold plating specifications on mating and post surfaces. Insulation material, flammability rating, and all other material properties are equivalent.

Q: What is the significance of the different part number suffix?

A: The part numbers differ only in the final digit designation. This variation does not reflect differences in electrical or mechanical performance. Both parts share the same base product number TSW-102 and are functionally interchangeable.

Q: Are both parts RoHS compliant?

A: Yes. Both TSW-102-07-G-D-LL-001 and TSW-102-07-G-D-LL-002 are ROHS3 compliant with MSL rating of 1 (Unlimited), suitable for applications requiring regulatory compliance.

Q: What is the through-hole mounting configuration?

A: Both connectors feature kinked pin solder termination designed for through-hole PCB mounting. The 0.100" (2.54mm) pitch accommodates standard PCB hole spacing for this connector class.