TSV6290ILT Equivalent & Substitute Parts

Part Overview

The TSV6290ILT is a general-purpose operational amplifier manufactured by STMicroelectronics, housed in a SOT-23-6 surface mount package. This rail-to-rail output amplifier operates across a 1.5 V to 5.5 V supply range and is designed for low-power applications requiring single-circuit amplification. The device is currently in active production status with 53,270 units in stock.

Substitute parts are identified when equivalent functional performance can be achieved within the same package form factor and electrical operating parameters. Alternative models become necessary when the primary part reaches end-of-life status, supply constraints occur, or design flexibility is required across multiple sourcing channels.

Key Parameters

Parameter	Value	Unit
Amplifier Type	General Purpose	—
Number of Circuits	1	—
Output Type	Rail-to-Rail	—
Package / Case	SOT-23-6	—
Mounting Type	Surface Mount	—
Voltage - Supply Span (Min)	1.5	V
Voltage - Supply Span (Max)	5.5	V
Operating Temperature	-40 to 125	°C
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution eligibility for the TSV6290ILT is determined by the following criteria:

Package Compatibility: All substitute parts must use the SOT-23-6 surface mount package to ensure direct board-level compatibility without layout modifications.

Functional Classification: Substitute parts must be classified as general-purpose operational amplifiers with single-circuit configuration and rail-to-rail output capability.

Supply Voltage Range: Substitute parts must operate within the 1.5 V to 5.5 V supply span. Parts with minimum supply voltage requirements exceeding 1.5 V or maximum ratings below 5.5 V are not direct substitutes.

Temperature Range: Operating temperature range of -40°C to 125°C is required for thermal environment compatibility.

Compliance Standards: All substitute parts must maintain ROHS3 compliance and MSL Level 1 (Unlimited) moisture sensitivity rating to ensure manufacturing and storage compatibility.

Input Bias Current: All qualified substitutes maintain 1 pA input bias current specification.

The following parts meet these substitution criteria: LMV341IDBVR, TLV341IDBVR, TLV341AIDBVR, and TLV341AIDBVT.

Parameter Comparison

Parameter	TSV6290ILT	LMV341IDBVR	TLV341IDBVR	TLV341AIDBVR	TLV341AIDBVT
Manufacturer	STMicroelectronics	Texas Instruments	Texas Instruments	Texas Instruments	Texas Instruments
Amplifier Type	General Purpose	General Purpose	General Purpose	General Purpose	General Purpose
Number of Circuits	1	1	1	1	1
Output Type	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail
Slew Rate (V/µs)	0.5	1	1	1	1
Gain Bandwidth Product (MHz)	1.3	1	2.3	2.3	2.3
Current - Input Bias (pA)	1	1	1	1	1
Voltage - Input Offset (mV)	4	0.25	0.3	0.3	0.3
Current - Supply (µA)	30	107	75	75	75
Current - Output / Channel (mA)	74	113	115	115	115
Voltage - Supply Span (Min) (V)	1.5	2.5	1.5	1.5	1.5
Voltage - Supply Span (Max) (V)	5.5	5.5	5.5	5.5	5.5
Operating Temperature (°C)	-40 to 125	-40 to 125	-40 to 125	-40 to 125	-40 to 125
Package / Case	SOT-23-6	SOT-23-6	SOT-23-6	SOT-23-6	SOT-23-6
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Product Status	Active	Active	Active	Active	Last Time Buy
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

Primary Substitute - TLV341AIDBVR: This part is the preferred substitute for the TSV6290ILT. It maintains active product status, offers higher gain bandwidth product (2.3 MHz versus 1.3 MHz), and operates across the full 1.5 V to 5.5 V supply range. With 999,400 units in stock, supply continuity is assured. The part is available in Cut Tape and Digi-Reel packaging formats, supporting both prototype and production workflows.

Secondary Substitute - TLV341IDBVR: This variant shares identical electrical specifications with TLV341AIDBVR and maintains active status. Current inventory of 1,220 units supports lower-volume applications. This part is suitable when TLV341AIDBVR availability is constrained.

Alternative Substitute - LMV341IDBVR: This Texas Instruments part operates within the substitution criteria but requires a minimum supply voltage of 2.5 V, restricting use in applications requiring 1.5 V operation. The part is active with 19,970 units in stock. Selection of this part is appropriate only when the application circuit operates at 2.5 V or higher.

Transitional Substitute - TLV341AIDBVT: This part carries Last Time Buy status, indicating discontinued production. While electrically equivalent to TLV341AIDBVR, the limited inventory of 2,444 units and end-of-life designation make this part unsuitable for new designs or long-term production commitments.

All substitute parts maintain ROHS3 compliance and MSL Level 1 moisture sensitivity rating, ensuring compatibility with standard manufacturing and storage protocols.

Frequently Asked Questions (FAQ)

Q: Can the LMV341IDBVR be used in all applications where the TSV6290ILT is specified?

A: No. The LMV341IDBVR requires a minimum supply voltage of 2.5 V, while the TSV6290ILT operates from 1.5 V. The LMV341IDBVR is suitable only for applications operating at 2.5 V or higher supply voltages.

Q: What is the primary difference between TLV341IDBVR and TLV341AIDBVR?

A: Both parts share identical electrical specifications and operating parameters. The primary difference is packaging format: TLV341IDBVR is supplied in Cut Tape and Digi-Reel format, while TLV341AIDBVR is available in the same packaging options with higher inventory availability (999,400 units versus 1,220 units).

Q: Why is TLV341AIDBVT listed as a substitute if it is Last Time Buy?

A: TLV341AIDBVT meets all electrical and mechanical substitution criteria and is electrically identical to TLV341AIDBVR. However, Last Time Buy status indicates production discontinuation. This part is listed for reference in existing designs but is not recommended for new applications due to limited remaining inventory (2,444 units).

Q: Are all substitute parts available in SOT-23-6 packaging?

A: Yes. All listed substitute parts use the SOT-23-6 surface mount package, ensuring direct board-level compatibility without layout modifications or design changes.

Q: Do all substitute parts maintain the same temperature operating range?

A: Yes. All substitute parts operate across the -40°C to 125°C temperature range, matching the TSV6290ILT specification.

Q: What compliance certifications do the substitute parts carry?

A: All substitute parts are ROHS3 compliant and carry MSL Level 1 (Unlimited) moisture sensitivity rating, matching the TSV6290ILT compliance profile.

Q: How do the slew rate and gain bandwidth product differ among substitutes?

A: The TSV6290ILT has a slew rate of 0.5 V/µs and gain bandwidth product of 1.3 MHz. All Texas Instruments substitutes (LMV341IDBVR, TLV341IDBVR, TLV341AIDBVR, TLV341AIDBVT) offer higher performance with 1 V/µs slew rate and either 1 MHz (LMV341IDBVR) or 2.3 MHz (TLV341 variants) gain bandwidth product. These higher performance characteristics are compatible with applications designed for the TSV6290ILT.

Q: Which substitute part should be selected for new production designs?

A: TLV341AIDBVR is the recommended choice for new production designs. It maintains active product status, offers the highest inventory availability (999,400 units), operates across the full 1.5 V to 5.5 V supply range, and provides superior performance specifications compared to the TSV6290ILT.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message